el bandido
07-12-2012, 10:40 PM
The Golden Media TripleX is a new receiver with beta firmware. The current 1.2.51 firmware version has a bug in the Factory Default that seems to corrupt the system configuration bin file. This will be a fatal error for a lot of people requiring the receiver to be sent back for a reset.
To avoid this problem, do not do a factory default. If you have problems, reload the firmware or the sat and channel database.
Listed below is TripleX receiver error information from putty that was generated after a factory default was done.
[MAIN] init finish,errCode=0
[ YWDBASEv_GetData][ 578] error 0x1f40006
[ YWDBL_CommGetVolume][ 288] YWDBLi_CommGetByFldNoWithDefault COMM_VOLUME errType = 0X1F40006 Unknown
[ YWDBASEv_GetData][ 578] error 0x1f40006
[YWDBLi_ScGetByFieldNo][ 101] YWDBL_GetSysCfgField uFieldNo = 15[YWDBL_ScGetResolution][ 496] YWDBLi_ScGetByFieldNo SYSCFG_DEFINITE errType = 0X1F40006 Unknown
########################## uiCompSize[0X00A2251C]================
[*error*][YWFILE_IsDbFileOk:539]===Open file[./AppUserDb/syscfg.bin] failed===
[*error*][YWFILE_ReadFlashToDB:793]===Read [./AppUserDb/syscfg.bin] failed, take [./AppUserDb/syscfgbak.bin] as default===
[*error*][YWFILE_IsDbFileOk:539]===Open file[./AppUserDb/syscfgbak.bin] failed===
[*error*][YWFILE_ReadFlashToDB:799]===Read [./AppUserDb/syscfgbak.bin] failed, take [./AppUserDb/syscfgdef.bin] as default===
[*error*][YWFILE_IsDbFileOk:539]===Open file[./AppUserDb/syscfgdef.bin] failed===
Board: STx7105-PDK [32-bit mode]
These are not easy errors to get rid, so be sure to avoid doing a factory default until the firmware is fixed. EB
To avoid this problem, do not do a factory default. If you have problems, reload the firmware or the sat and channel database.
Listed below is TripleX receiver error information from putty that was generated after a factory default was done.
[MAIN] init finish,errCode=0
[ YWDBASEv_GetData][ 578] error 0x1f40006
[ YWDBL_CommGetVolume][ 288] YWDBLi_CommGetByFldNoWithDefault COMM_VOLUME errType = 0X1F40006 Unknown
[ YWDBASEv_GetData][ 578] error 0x1f40006
[YWDBLi_ScGetByFieldNo][ 101] YWDBL_GetSysCfgField uFieldNo = 15[YWDBL_ScGetResolution][ 496] YWDBLi_ScGetByFieldNo SYSCFG_DEFINITE errType = 0X1F40006 Unknown
########################## uiCompSize[0X00A2251C]================
[*error*][YWFILE_IsDbFileOk:539]===Open file[./AppUserDb/syscfg.bin] failed===
[*error*][YWFILE_ReadFlashToDB:793]===Read [./AppUserDb/syscfg.bin] failed, take [./AppUserDb/syscfgbak.bin] as default===
[*error*][YWFILE_IsDbFileOk:539]===Open file[./AppUserDb/syscfgbak.bin] failed===
[*error*][YWFILE_ReadFlashToDB:799]===Read [./AppUserDb/syscfgbak.bin] failed, take [./AppUserDb/syscfgdef.bin] as default===
[*error*][YWFILE_IsDbFileOk:539]===Open file[./AppUserDb/syscfgdef.bin] failed===
Board: STx7105-PDK [32-bit mode]
These are not easy errors to get rid, so be sure to avoid doing a factory default until the firmware is fixed. EB