el bandido
10-25-2012, 11:45 AM
ProtoPlex for GM Triplex
FTP LogIn
Username = root
Password = dreambox
EOS-Team
present
ProtoPlex V1
(based on open Pli)
...
What is it coming up with?
- full Tuner Support (both DVB-S2 and also DVB-T/C working)
- EOS-Panel
- WebIf ver. 1.7.1
- Videowizard on v.format
- WLAN Support (Drivers tested: rt3070, rt5370, rtl8187, 8712u;
untested but integrated: rt73, zd1201, zd1211)
- RC-Choice: Triplex, Pingu RC2, GM Spark, Pingu RC1+2, Amiko Alien (untested), Default
- Receiver Display switchable
- Overclocking
- Red-LED for Deepstandby adjustable
- faster Backup (for a successful Backup a Pendrive/HDD in ext2/3 formatted and mounted to /media/sda1 is obligatory )
- Bootvolume adjustable
- Samba Support
- PEARL-USB-Display Support (already preconfigured)
- all Screenshots via WebIF are supported (Exception only HD Channels - they work only in OSD Mode)
- Webif Bouquetseditor in NF-Design
- Webif WebAdmin in NF-Design
- Sparkbackup out of E2: hereby you can realize a Backup from the original Sparksoftware
- PIP works, even with different Transponders, but will break after about 20 Seconds (because double Audio)
Key Assignement:
V-Format=Videowizard
Time=Preview for LCD-Display on TV (exit only with pushing Time again)
Find=Channelsearch
Tms=configure Recordingpath
Blue=PPanel
F1+Blue=Channelname shown in Display
F1+Yellow=Channelname off in Display
F1+Red=Reboot
F1+Green=Gui Reboot
F1+1=Mcas starting
F1+2=Oscam starting
F1+3=Mgcamd starting
F1+4=Camd3 starting
F1+5=Incubus starting
F1+6=Vizcam starting
F1+7=NewCS and Camd3 starting
F1+8=Oscam and Mgcamd starting
F1+0=All Emus Stop
Known Bugs:
- Sometimes the Box hungs up by realizing a Gui Reboot within the Menu
First Aid: F1 + Red Key (reboot)
- Scart not work yet, only HDMI
Note: I have tested this firmware a bit on the TripleX and I find that it is a pretty good operating system.
The E2 images will be better than some of the factory firmwares if the support and improvements for E2 continues.
I will be supporting the E2 images on the receivers that I use. EB
FTP LogIn
Username = root
Password = dreambox
EOS-Team
present
ProtoPlex V1
(based on open Pli)
...
What is it coming up with?
- full Tuner Support (both DVB-S2 and also DVB-T/C working)
- EOS-Panel
- WebIf ver. 1.7.1
- Videowizard on v.format
- WLAN Support (Drivers tested: rt3070, rt5370, rtl8187, 8712u;
untested but integrated: rt73, zd1201, zd1211)
- RC-Choice: Triplex, Pingu RC2, GM Spark, Pingu RC1+2, Amiko Alien (untested), Default
- Receiver Display switchable
- Overclocking
- Red-LED for Deepstandby adjustable
- faster Backup (for a successful Backup a Pendrive/HDD in ext2/3 formatted and mounted to /media/sda1 is obligatory )
- Bootvolume adjustable
- Samba Support
- PEARL-USB-Display Support (already preconfigured)
- all Screenshots via WebIF are supported (Exception only HD Channels - they work only in OSD Mode)
- Webif Bouquetseditor in NF-Design
- Webif WebAdmin in NF-Design
- Sparkbackup out of E2: hereby you can realize a Backup from the original Sparksoftware
- PIP works, even with different Transponders, but will break after about 20 Seconds (because double Audio)
Key Assignement:
V-Format=Videowizard
Time=Preview for LCD-Display on TV (exit only with pushing Time again)
Find=Channelsearch
Tms=configure Recordingpath
Blue=PPanel
F1+Blue=Channelname shown in Display
F1+Yellow=Channelname off in Display
F1+Red=Reboot
F1+Green=Gui Reboot
F1+1=Mcas starting
F1+2=Oscam starting
F1+3=Mgcamd starting
F1+4=Camd3 starting
F1+5=Incubus starting
F1+6=Vizcam starting
F1+7=NewCS and Camd3 starting
F1+8=Oscam and Mgcamd starting
F1+0=All Emus Stop
Known Bugs:
- Sometimes the Box hungs up by realizing a Gui Reboot within the Menu
First Aid: F1 + Red Key (reboot)
- Scart not work yet, only HDMI
Note: I have tested this firmware a bit on the TripleX and I find that it is a pretty good operating system.
The E2 images will be better than some of the factory firmwares if the support and improvements for E2 continues.
I will be supporting the E2 images on the receivers that I use. EB