Request /features that may be added if possible or report any bugs/issues HERE

[cpr43]

Please use the X2 discussion area to request any features that may be added if possible or report any bugs/issues so they can be forwarded to X Square Technology to solve.

1- Manual pids entering using remote control
2- Time clock in 12 hours mode option
3- Channel Editor (Keep rename name to channels once they're updated)

[rrob311]

1. More satellites allowed to have channels in memory.
2. More Diseqc settings
3. Fix Bandstacked LNB blind scanning.
4. More multimedia functions, Internet radio? etc.
5. More channel information, modulation, fec, signal type(dvb-s2, dvb-s) qpsk, 8psk, 16apsk etc

[ViP3R]

I have forward the above suggestions/Request for their consideration.

[cpr43]

I know they updated their web page recently, but I see most of the link aren't working. I cant even find where the latest files are located. Some files are showed as *.pdf but you cant download anything at all.

[ViP3R]

I know they updated their web page recently, but I see most of the link aren't working. I cant even find where the latest files are located. Some files are showed as *.pdf but you cant download anything at all.

Websites take time to build, especially with file attachments and proper links.

Sometimes it's better not to fix what ain't broke..I should know, I break things all the time...lol

I'm sure they are still working on the new site.

[cpr43]

Websites take time to build, especially with file attachments and proper links.

Sometimes it's better not to fix what ain't broke..I should know, I break things all the time...lol

I'm sure they are still working on the new site.

I understand!! just mentioned it as part of the thread :Request /features that may be added if possible or report any bugs/issues.

[ViP3R]

I have forward the above suggestions/Request for their consideration.

They got back and can solve some, add some and some are not possible.


1- Software improve

Add Manual PID
Fix the DiSEq Storing Space from 32 to 64

For these two points our engineers work to solve it

2- Additions

Internet Radio
Time Clock

We will work to supply it and also we are trying to add IPTV but the Main CPU still has some bugs with it and we still work on it.

Satellites increased to be 99 cannot be supported because the memory of the nand flash.

Fix Bandstacked LNB blind scanning ...Rob this is for you, they need more details on just what the problem is.

[rrob311]

It double scans each polarity during a blindscan with the 5150/5750 setting. This is using the popular eagle aspen lnb. For instance: a 4000H transponder will scan in as 4000 and 3400, or 4000 and 4600. It causes much editing to be necessary after a blind scan. The Openbox works on this setting fine but many receivers have this glitch.

[ViP3R]

It double scans each polarity during a blindscan with the 5150/5750 setting. This is using the popular eagle aspen lnb. For instance: a 4000H transponder will scan in as 4000 and 3400, or 4000 and 4600. It causes much editing to be necessary after a blind scan. The Openbox works on this setting fine but many receivers have this glitch.

Thank you, sent it off.

[cpr43]

Doing great so far congrats

[cpr43]

They got back and can solve some, add some and some are not possible.


1- Software improve


Add Manual PID
Fix the DiSEq Storing Space from 32 to 64

For these two points our engineers work to solve it

2- Additions

Internet Radio
Time Clock

We will work to supply it and also we are trying to add IPTV but the Main CPU still has some bugs with it and we still work on it.

Satellites increased to be 99 cannot be supported because the memory of the nand flash.

Fix Bandstacked LNB blind scanning ...Rob this is for you, they need more details on just what the problem is.


If possible when can we see these changes implemented?

[ViP3R]

If possible when can we see these changes implemented?

No idea carlos, let's just let them do there thing and fix when they can...No point in pushing for timelines.

[rrob311]

Hopefully the 64 diseqc settings will coincide with the amount of satellites you can have active in memory with channels stored. I think that amount is 32 as well.

[cpr43]

No idea carlos, let's just let them do there thing and fix when they can...No point in pushing for timelines.



Very good!! Its great to see they are looking at!! Yep, let them take their time!! Thank you for keeping us updated!!

[kodaz]

107w tp 4140 v 30000 does not scan in on my openbox s9, but does on my microhd, does it come in with the X2 prem hd?

thanks for the work done on the bandstacked :) i am almost ready to buy this one.

[Gary Bidwell]

How about getting the advanced timer to work for unattended recording.

[ViP3R]

How about getting the advanced timer to work for unattended recording.

Passed this on as well.

[TunaDude]

how about disec 1.1 and 1.0 like the open box line I cant buy this box and use it because its only disec 1.2


I use one 8 switch on this 8 switch 3 ports on it I hooked up a 4 output 1.0 disec this way I can do 17 separate lnb this x box I cant how did they forget to incorporate a 1.0 1.1 and 1.2 like all there other boxes from this alibaba place in china 53 dollars here at legit is a steal for this box but I can use it besides how long should it take for a editor and a way to save your channel? to your usb and then write them back like the open box line you know tp prog stuff is there a dump yet from this box to your usb stick?

those are some of what I would have needed to buy one of these x2 boxes of course after costacts 30 second to 1 minute fantastic blind scan speed of the open box x5 and it has the 1.0 1,1 etc id rather get this box even if it ends up taken 2 minutes to blind scan ku sats or 3 minutes its still faster than the regular open box s 9 that's seems to skip over shit all the time!

[el bandido]

Attached is a picture showing the Diseqc 1.0/1.1 features.

[cpr43]

I'm using mine with 4x4 (22Khz on/off) and 1.0 diseqc switch on all my 8 fixed sats w/out any problem at all.

[cpr43]

Websites take time to build, especially with file attachments and proper links.

Sometimes it's better not to fix what ain't broke..I should know, I break things all the time...lol

I'm sure they are still working on the new site.



Hey Vyper
have you heard if they are working on the web page?? still, anything doesnt work, eventhough the box do update using the internet update process

[cpr43]

Websites take time to build, especially with file attachments and proper links.

Sometimes it's better not to fix what ain't broke..I should know, I break things all the time...lol

I'm sure they are still working on the new site.

Hey Vip3r
I dont see any progress on the X2 web page. No way to download files, channel editor etc, etc. X2 users are growing and some are in the learning process and need to be able to download latest files, recovery tools and channel editor!! I have sent e-mails to mrs Wang but no answer!!:hmmm:

[ViP3R]

Hey Vip3r
I dont see any progress on the X2 web page. No way to download files, channel editor etc, etc. X2 users are growing and some are in the learning process and need to be able to download latest files, recovery tools and channel editor!! I have sent e-mails to mrs Wang but no answer!!:hmmm:

Carlos, it's a holiday in China, the are celebrating Chinese new year..and yes they are working on a new file.. Give them some time to fix/add things.
Until they fix their new site they said they would forward any new software to me..

There is no need to keep sending messages, they are aware bro.

[cpr43]

Okee

[cpr43]

Bounce TV is scanning ITC on AMC 1 103W 4121 H 30000. Video is 193 but its scanning w/out any audio at all on the X2. I have edit it with the Openbox editor for my Openbox with the audio to 194 and it plays fine. We need to send request to X2 /Xsat so we can do some edit with

[Gary Bidwell]

It would be nice if we could have away to record you tube add.

[Gary Bidwell]

Any word on when we will see an update to firmware ? Fixing the limited 32 satellite ?

[GetBit03]

The only real problem I have with my box is the no service screen gets stuck on my display after I change to a channel with service. I must power cycle to get it to go away OH and the limited 32 satellite selection!!

[chewie]

Ip tv will be good.

[rrob311]

I dusted off my original x2 today and I am running the 10-11 firmware on it. Only problem is I can't upgrade for some reason. I get upgrade failed every time I try. Another member was having the same issue with the same firmware. Any ideas to get this firmware updated would be much appreciated.

[rrob311]

Also, I was able to upgrade my other x2 receiver to this latest firmware, however, I am unable to get the channel list I made to load. It goes through the update process ok but after the box resets it has the same list as before the upgrade. Not sure what the deal is.

[rrob311]

I just upgraded my other x2 to the latest firmware and I am unable to load the satellite files. It keeps diverting back to the one that is disorganized.

Also, is there any ETA for more applications for this receiver like internet radio and so forth?

[cpr43]

I haven't heard from Mrs Wang since a long time. I heard they're working on the X7 bugs. We still waiting for a friendly user Channel Editor for the X2. Also, the "! NO SERVICE" remaining in screen and only going away turning off and on the unit is beginning to bother me. I hope they dont do what the Openbox did with the older models. Thats why stop purchasing X2 for now!! I hope its not the time to look other way!!

[Costactc]

I haven't heard from Mrs Wang since a long time. I heard they're working on the X7 bugs. We still waiting for a friendly user Channel Editor for the X2. Also, the "! NO SERVICE" remaining in screen and only going away turning off and on the unit is beginning to bother me. I hope they dont do what the Openbox did with the older models. Thats why stop purchasing X2 for now!! I hope its not the time to look other way!!

Be patient my friend, they did show support previously and I'm sure we will have a better working file shortly.

[ViP3R]

The last file was less than two weeks ago,, A little early to get ones knickers in a knot. :peace:

[aleem]

hi guys
is it possible to add TWIN PROTOCAL to the x2fta new files.

[jugghedd]

..

[Costactc]

I've never really paid attention to the signal quality but I have never had duplicate channels after any scan with my x2.

[ViP3R]

Just got word that new firmware will be released next week.

Not sure on what will or will not be fixed with the new firmware..We will post it here for all to find out...

[cpr43]

People keep asking why there is not an official homepage to get updates from. I have sent several messages w/out any response at all. All the x2 owners out there arent aware of our forum to get the latest!

[eastof111]

When Google indexes some of the topics here, people will find our site. Seems Legit all ready has most topics on the X2 indexed. But I agree, it makes no sense why they don't update their own web site.

[cpr43]

Yep, that's true but X2/Xsat as a company/ seller should do something about it. They used to have a working home page back on 2012 with support and files availables to download.

[ViP3R]

I have asked myself about the state of the x2 site, never really got an answer on when they would fix the issues.

All I know is they send me files and communicate often, so I guess we just roll with this for now.

[Gary Bidwell]

They do better than a lot of the companies on communication and updating file. I am very please with there effort.

[cpr43]

Nothing has to do with the company communication or the great effort with recent releases. I'm more than please with it. It's just that they need to fix their home page period. I can assure you that future customers which read or hear the good performance of the box will search and look for a homepage. I usually do it when looking for new product:krazy:

[Gary Bidwell]

I agree , I do the same. It would be good that they get the page working.

[jugghedd]

.

[cpr43]

jugghedd
Could it be posible to show me or explain a little big?? I'm trying to understand to send the request directly to X2.

[jugghedd]

.

[cpr43]

Well, Im really trying here. Here is a pic of my EZM channel editor with my database and I can see all the satelite names along with their TPs and in the second pic the sat wiith their channels

50625063

[jugghedd]

.

[cpr43]

see!! I was asking to explain a little big!!!:greed:

I will make sure your they get your request, Thanks

[cpr43]

Looking at the internal editor I see at Sat/TP manager (pic#1) all the sats listed on the left and all the TPs on the right side for each sat. At the TV channel editor I see the name of the Sat on the upper left corner, all the channels below and the TPs info on right (pic#2)

50645065

[jugghedd]

.

[cpr43]

jugghedd
I'm really sorry for all the confussion. Will put a end to the language barrier here. No need to explain any further. Wish you the best!

[jugghedd]

GARBAGE

[jugghedd]

.

[eastof111]

Maybe, they are contemplating doing E2 in the future, since E2 DOES have bouquets.:laugh:
Cheap shot, I know, couldn't resist. LMAO...

[Costactc]

Maybe, they are contemplating doing E2 in the future, since E2 DOES have bouquets.:laugh:
Cheap shot, I know, couldn't resist. LMAO...

Funny guy....always good to have a sense of humor East.

[ViP3R]

Maybe, they are contemplating doing E2 in the future, since E2 DOES have bouquets.:laugh:
Cheap shot, I know, couldn't resist. LMAO...

Now that is funny...lmao

That page is just a generic template,, someone is trying to work on..but not the best...lol

[eastof111]

Yes, same generic format they have been using for the X7 site.

[ViP3R]

FYI they are testing the new beta software this week and will release it once ready and stable.. It will be released to LegitFTA first before any other site..:yes2:

[Costactc]

Sounds good Viper, I do hope they address the audio/video info issue and 64 sat memory.

[rrob311]

IDK if anyone else has noticed this but when I shut the receiver off by unplugging it I am losing a lot of my channels that are in memory. I just turned my receiver on and only have 6 satellites saved with channels still. I think the firmware is being screwy in this regard. I haven't really tried to save a good channel list because of the bugs.

[Costactc]

IDK if anyone else has noticed this but when I shut the receiver off by unplugging it I am losing a lot of my channels that are in memory. I just turned my receiver on and only have 6 satellites saved with channels still. I think the firmware is being screwy in this regard. I haven't really tried to save a good channel list because of the bugs.

That's odd Rob. I have unplugged my unit several times because of loading freezes on the internet but have never lost any saved channels or satellites. Looking forward to improvements for the fastest blind scanning stb I have ever tested.

[Gary Bidwell]

Same here ,I have never lost any channels no matter what the firmware version. I unplugged my off every night and have unplugged when it has lockup.

[rrob311]

Ya I had like 15 or so with channels and for some reason I only have like 5 now with channels and the satellites are still selected.

[Gary Bidwell]

you don,t have hd or sd only selected

[rrob311]

When you press the Sat button it says All Satellite, then 6 other satellites. I will have to reset the receiver and start over and see what happens. I would rather wait for firmware that allows more satellites to be used in channel memory so I can make a more serious list.

[jugghedd]

I have also lost channels. I've had it come up to the invisible channel list and also lost all channels on certain SATs. Editted channel names dont stick either. I got to the point where Im waiting for updates before I send any more bug fix requests. We're doing our part as consumers. Now, it's X2's move to fix their firmware and provide some stability. Spending hours to get everything setup properly and losing changes is getting old.

[cpr43]

Same here ,I have never lost any channels no matter what firmware. Once I spent all the time editing the channels I immediatly make a database backup inside the box so any time something weird happens i can restore it as i save it. I also make a copy to my USB as a backup. All my renamed channels that I edited using the channel editor and flagged them as SERVICE ID 0 (cero) are kept the same way. They will show up the way I saved them plus they're added at the end of the list with the regular PR-1, PR-2 etc etc.

[jugghedd]

..

[kamaxx]

There are some important bugs that maybe mentioned here

*X2SAT freezes when you accelerate zapping or inter crypted channels
*Renaming satellites is so hard and false when you add satellites
*Resolution is not constant or must be set again when power is gone

[Gary Bidwell]

What do you mean by accelerate zapping, I turn my surge strip off ever night and have never had to reset the resolution ?
I know that the editor program takes some getting use to .

[kamaxx]

What do you mean by accelerate zapping, I turn my surge strip off ever night and have never had to reset the resolution ?
I know that the editor program takes some getting use to .

Firstly,

Editor program has bug when you install it.
Also;I set it up to 1080i/50hz but It comes to default value 1080p after power is gone.

Secondly,
This machine is freezing if CPU is at hard working.
It frezees when

*Editing channels a long time
*Zapping more and more on crypted and card sharing channels

I liked this machine and will like more if problems are gone.

Meanwhile I also bought an openbox x5.So This receiver has lots of features but It's not as stable as X2SAT.

I have also some Linux OS devices like Kathrein ufs-913,Mara M9,Technisat Digit ISIO S,Eycos E95.15HD

[rrob311]

I just verified the losing channels problem again with the X2. I did a full scan of 103W C band last night. Turned on the receiver just moments ago and had the channels. I had 5 satellites in channel memory. I then did a blind scan of 91w Ku and scanned in about a dozen channels. I go back to the satellite list and 103W cband is gone.

[Gary Bidwell]

I have scan in 32 sats and never lost any channels with about 500+ channels, My be the receiver has a weak memory?

[rrob311]

Maybe, however I have never experienced this problem until using the latest official firmware. I have the maximum satellites selected in memory but it seems only about 5 will keep channels on them. I am going to hang tight on creating a channel list until this is resolved. I have mainly just been using the box to blind scan with.

[Costactc]

Maybe, however I have never experienced this problem until using the latest official firmware. I have the maximum satellites selected in memory but it seems only about 5 will keep channels on them. I am going to hang tight on creating a channel list until this is resolved. I have mainly just been using the box to blind scan with.

I have never had this issue Rob and I have 2 x2 receivers. Me thinks something internal and nothing to do with the file.

[chifut]

I had my X2 two days ago-on Thursday- ..I like it .It's much better than.the dumb OB9 .
I set all my sats from 72-116W ,and still working to set the .Atlantic side.

[ketone]

I was trying to play an avi through the usb with a thumb drive, the avi played back fine except ,no sound. The audio was coded in mpeg aac. Is that difficult to implement in the code?Thanks for a great receiver!

[Gary Bidwell]

I have already told Ma Wang about the need to fix mpeg aac and they are working on it

[Silverado5150]

Would it be possible to have separate categories for scanning to make it possible for FTA only or All. Radio separate from TV. Seems like not enough choices among the headings of scanning and too much is under one.

Frequency limits for scanning like start 11700 to stop 12200 mhz for example.

[jaymwine]

1. Could there be a firmware version with east facing satellites. I like the receiver but all of the satellites are West facing and of no use to me in my part of the world.

2. Furthermore, the strength meter for the signal is always at 75-79 regardless of where I face the dish even when its directly facing the wall. This makes it hard to determine left-right azimuth and ultimately makes picking even the most basic satellite doubly difficult.

Thanks

[cpr43]

1. Could there be a firmware version with east facing satellites. I like the receiver but all of the satellites are West facing and of no use to me in my part of the world.

2. Furthermore, the strength meter for the signal is always at 75-79 regardless of where I face the dish even when its directly facing the wall. This makes it hard to determine left-right azimuth and ultimately makes picking even the most basic satellite doubly difficult.

Thanks

Thank you for your inputs. We will take a note and make sure XSAT/ X2 received your request,

[cpr43]

Hey Vip3r

Here is a request I got from someone for the X2. Can you forward this to Xsat/X2 to see if it can be implemented in the next releases??

regards,
Carlos

"""Carlos, on the X2, after hitting OK, in the channel list, pressing either the FAV or the SAT button does the same thing, that is, they just go to another sat, there is no list, so I have no way of knowing what sat is going to come next when I hit the Button.
But, I just noticed, on the Geosat HDVR1200, pressing 'SAT' button in channel list will bring up a list of Sats to choose from, FAV button does nothing.(I have not set any favorites)

[dr.zin]

1. Could there be a firmware version with east facing satellites. I like the receiver but all of the satellites are West facing and of no use to me in my part of the world.

2. Furthermore, the strength meter for the signal is always at 75-79 regardless of where I face the dish even when its directly facing the wall. This makes it hard to determine left-right azimuth and ultimately makes picking even the most basic satellite doubly difficult.

Thanks

1. load euro firmware instead
2. signal strength only measures the connection from receiver to lnb.You could be aimed at the ground and still get signal strength.It's the signal quality you want to adjust for.

[yosssi]

works great. thx
Would be good when do autoscan save the settings for next scan. for example if you only scan tv channels put it next time that do another scan.

[kodaz]

i purchased one and tried the latest firmware which did not work out so well. the box kept rebooting or the lnbs lost power.
i installed the july file and at least it more or less stopped losing the lnbs.
my last concern is that i cannot find a good way to enter my fss lnb settings for a blind scan. is ku bandstacked there?
i didnt not see it
thanks

[rrob311]

I haven't seen a ku bandstacked setting but you may try the user lnb option and there is an option there for dual user lnb, try to enter your two different lnb settings into that and see if it works. I had some double scanning problems with my cband bandstacked setup so I would have to edit the channel lists afterwards.

[kodaz]

limited success with that. scanned double everything it seemed and well over 400 found.
however, with a manual tp entry (10750, 13850 lnb setting) it did find the channels on the H tp i manually entered.
so it uses the numbers, it just doesn't know how to scan with them. (it seems)

[turbosat]

Having an option to do a detailed scan, or be able to adjust the "step" rate the X2 is using would be great. I'm using the latest Sept firmware, and generally works fine, but it still misses channels sometimes. Using a 1m dish on 87w mine can no longer see the Louisana PBS channels, skips over them for some reason-but it does find LPBS "Feeds" channel.
Edit: I have learned the LPBS channels on 87w may be gone, at least temporarily, so That is not the X2's fault! Still , having the variable blind scan would be wonderful.

[tabriz]

1. load euro firmware instead
2. signal strength only measures the connection from receiver to lnb.You could be aimed at the ground and still get signal strength.It's the signal quality you want to adjust for.

i can not found euro firmware????!!
please give me link adress.thanks

[Costactc]

i can not found euro firmware????!!
please give me link adress.thanks

Euro firmware can be found on their site, since most of us live in North America our site has that version. Unless shipped from the US, the x2 comes equipped with Euro fw.

[cpr43]

Have you tried Updating by Network?? Its easy to do

[tabriz]

With the power off button on the remote control.
Turn off the device by pressing the power button device
Much time bieng on !!!!! and this big problem

[wen]

SW Version: r2890-32202607 -xs0

I have added several satellites and presently have 81. I don't know what the limit is, but hopefully it is 99.

I cannot check more than 64 satellites to use in the Satellite Setting Window. I need 17 more satellites to be available, but 99 (total) would allow the X2 Premium HD to view channels on all visible C and Ku Satellites.

[FatManWalking]

Some time back I noticed that the LPB channels would disappear. I called them and spoke to one of their engineers. He told me that the satellite broadcast feeds are for backup in the event of a failure of their fiber optic distribution system.

They also uplink HS football games etc with their trucks, when in season. When they do that, the normal satellite feeds are shut down.

FMW

[MikeB]

Some time back I noticed that the LPB channels would disappear. I called them and spoke to one of their engineers. He told me that the satellite broadcast feeds are for backup in the event of a failure of their fiber optic distribution system.

They also uplink HS football games etc with their trucks, when in season. When they do that, the normal satellite feeds are shut down.

FMW

Backyard FTA RULE #!

NEVER call, NEVER email, NEVER contact the uplinker!!!

That's what gets things scrambled permanently! 99% of this stuff is NOT meant for us, and when you bring the fact to their attention that there are regular people out there watching it via their direct satellite feed, they don't like that.

[tabriz]

With the power off button on the remote control.
Turn off the device by pressing the power button device
Much time bieng on !!!!! and this big problem
by Nov 6th software my problem Resolved:bigthumbup:

[ftanut]

by Nov 6th software my problem Resolved:bigthumbup:

Where did you get the Nov 6th software, could not find it on the download section?.

Thanks

[cpr43]

Where did you get the Nov 6th software, could not find it on the download section?.

Thanks

Download from here

[Only registered and activated users can see links]

[tabriz]

Why is encoded by the satellites Astra 1KR/1L/1M/2C 19e and Astra 3B 23.5e channel will not open by cccam?? The disadvantage is that the device emulator, Please discuss this problem with the software team

[cpr43]

Why is encoded by the satellites Astra 1KR/1L/1M/2C 19e and Astra 3B 23.5e channel will not open by cccam?? The disadvantage is that the device emulator, Please discuss this problem with the software team



tabriz
You will need to contact Xsat/X2 directly

[Only registered and activated users can see links]


Please note that this forum is for the discussion of Free to Air signals that are FREE.

We do not tolerate nor allow posts that are relate to the illegal theft of encrypted signals.

Any post that either questions or has info on the illegal theft of signals will be deleted. Warning #1

[tabriz]

tabriz
You will need to contact Xsat/X2 directly

[Only registered and activated users can see links]


Please note that this forum is for the discussion of Free to Air signals that are FREE.

We do not tolerate nor allow posts that are relate to the illegal theft of encrypted signals.

Any post that either questions or has info on the illegal theft of signals will be deleted. Warning #1
ok..thanks

[MikeB]

Has anybody figured out how to do a 30 second skip each time at the press of a button when watching pvr recorded tv shows? It sure would be handy to skip over commercials... I'm tired of using "Fast Forward"...

If it doesn't exist, can we get it added to the next firmware?

[Marv]

I loaded the Dec. Firmware, I see there is still a problem with the receiver remembering the date when shut off. I would appreciate it if someone could mention the problem to X2 and see if there can be a fix for it. Thanks...

[dr.zin]

I left the clock set for 24hour mode

[Marv]

dr.zin, I don't seem to have a problenm with the time. The only thing I loose is the date when I shut down the X2. I setup with GMT off. 24hr. format.

[ViP3R]

I loaded the Dec. Firmware, I see there is still a problem with the receiver remembering the date when shut off. I would appreciate it if someone could mention the problem to X2 and see if there can be a fix for it. Thanks...

I have asked them to look at this.


SW Version: r2890-32202607 -xs0

I have added several satellites and presently have 81. I don't know what the limit is, but hopefully it is 99.

I cannot check more than 64 satellites to use in the Satellite Setting Window. I need 17 more satellites to be available, but 99 (total) would allow the X2 Premium HD to view channels on all visible C and Ku Satellites.

I have asked for confirmation what the limit is.


Has anybody figured out how to do a 30 second skip each time at the press of a button when watching pvr recorded tv shows? It sure would be handy to skip over commercials... I'm tired of using "Fast Forward"...

If it doesn't exist, can we get it added to the next firmware?

Nice suggestion..I have asked if this is possible..I would think it should not be a problem.

[ViP3R]

Some answers for the above questions.

For the the receiver remembering the date when shut off. - this issue is can't be solve due to Hardware issue ..I'm told the box would need a battery such as a PC or laptop.

The Maximum capacity is 64 due to DDR Memory.

30 second skip-This will be forwarded to the engineers to look at.

Also the TV icon overlapping Video resolution - We will solve this issue in the next software

[FTAgal]

downloads are on product pages now. Look around.. found premiumI soft here. [Only registered and activated users can see links] ([Only registered and activated users can see links])

[FTAgal]

Your soft is here [Only registered and activated users can see links]

I know they updated their web page recently, but I see most of the link aren't working. I cant even find where the latest files are located. Some files are showed as *.pdf but you cant download anything at all.

[mountaineer]

Requests:
1. After scanning (blind I believe)....can channel list be just for that sat. Right now after scanning it goes to all sats channel list.
2nd. Any way to play video from other devices through lan? I have wdtv live and other receivers connected through network...any chance of DLNA or something similar to allow media player on X2 to play these?

Thanks and it is a great box...these are just suggestions that would make it even better for the price.

[dr.zin]

#1 is a nuisance,especially after a blindscan for wildfeeds.
I have to hit the sat button and select the sat I just scanned.
the default should be the sat you just scanned.
Also the default scanning mode should be blindscan,not default tp list mode.

[ViP3R]

These requests have been sent off.

Thanks for the input guy's

[Satviewer]

Since this device has an ethernet connection, can you use it to do any of the following: Make the receiver save recordings to another location on the network (instead of or in addition to a drive connected to the USB port), access the receiver from another computer on the network via FTP, SSH or some other method that would allow viewing the stored recordings on the USB drive, browse to the receiver from another computer on the network to view/edit the upcoming recording schedule, and/or set up a VNC session (would require the ability to enable a VNC server on the receiver) so that you can use another computer on the local network to set up the receiver? Note that in the case of the VNC session I would not expect to use that to actually watch programming, just as a way to do receiver setup and configuration from a computer that has a real keyboard. If any of those are not available now, is there any chance they could be added?

The thing I really want is some way to access already-recorded programs from other computers on the LAN, either by allowing access to the receiver (and the USB drive attached to the receiver) from other computers, or by having a way to make the receiver save recordings to a network share (preferably both). The thing I would rank as second most desirable is a way to view and change the recording schedule from another computer on the network.

[el bandido]

How much does the X2 receiver cost?

The features that you are asking for are available in more expensive receivers and I enjoy using them. You probably will not see those features added to the X2 due to cost and memory limitations. EB

[Satviewer]

I don't know if you are replying to me but I don't think it's unreasonable to ask for such things - after all, the hardware (the Ethernet port) is already there, and the recordings have to be stored as files on the hard drive, and it really would not take much in the way of software to provide access to them, if there's not already some way. As I understand it, the device already has FTP capability in order to get update files, so that implies that it has all the connectivity needed, it would just be a matter of where the small bit of open source software has been installed to allow someone elsewhere on the network to access those files. Same for the other things I asked about; assuming that this device is running some form of Linux at its core, then adding any of those features should be pretty trivial if they are not there already.

Which more expensive receiver(s) have the features I asked about, not that I have a lot of money to spend?

[ViP3R]

I did ask X2 about DLNA and this was the response.

This Chipset is not support the DLNA and we did tried before to add it but is didn't success , We will have new version and we are working on it will support this function.

[mountaineer]

Thanks Viper!

[el bandido]

I don't know if you are replying to me but I don't think it's unreasonable to ask for such things - after all, the hardware (the Ethernet port) is already there, and the recordings have to be stored as files on the hard drive, and it really would not take much in the way of software to provide access to them, if there's not already some way. As I understand it, the device already has FTP capability in order to get update files, so that implies that it has all the connectivity needed, it would just be a matter of where the small bit of open source software has been installed to allow someone elsewhere on the network to access those files. Same for the other things I asked about; assuming that this device is running some form of Linux at its core, then adding any of those features should be pretty trivial if they are not there already.

Which more expensive receiver(s) have the features I asked about, not that I have a lot of money to spend?

Nothing seems to be trivial when adding features to a fta receiver. What is done to add or improve one feature may adversely affect other features. It would be nice if we could buy a receiver that had a lot of options and be able to only activate the features we want or need. A sort of Do-it-yourself type receiver. Nothing like that exists yet that I know of.

As for a low cost solution, I think Golden Media will have the most economical receiver that has most of the features you want. Contact viper for more information on these receivers.

[analgrumpy]

Greetings, I recently purchased a premium X2, I managed to connect to the satellite but all channels are coded red $. and the message "scrambled service" is displayed. I do not know how to configure the iks. and I need help please. I can not watch scrambled channels. I'm pointing at in Ku band to the satellite 61.1W. but I only see the free channels. Thanks

[Costactc]

Greetings, I recently purchased a premium X2, I managed to connect to the satellite but all channels are coded red $. and the message "scrambled service" is displayed. I do not know how to configure the iks. and I need help please. I can not watch scrambled channels. I'm pointing at in Ku band to the satellite 61.1W. but I only see the free channels. Thanks

Welcome to the site. We only discuss true fta here and the satellites you have attempted to scan are provider sats for dish network. We do not discuss nor condone iks here at all. Your x2 premium is an excellent receiver for true fta and the fastest blind scanning box that I have ever tested so give it a shot on many of the true fta sats that are up there.

[yosssi]

Hello
Have a problem doing blindscan and manual scan with this feed channel that is active today all day on sat 12.5W 11127,883 Horizontal 3255,196 QPSK 3/4 DVB-S id D-370 KIEV. When scan it the receiver not doing nothing and crashes. It happens in both scanning options and crashes always since this feed is on.

6946

[Costactc]

Hello
Have a problem doing blindscan and manual scan with this feed channel that is active today all day on sat 12.5W 11127,883 Horizontal 3255,196 QPSK 3/4 DVB-S id D-370 KIEV. When scan it the receiver not doing nothing and crashes. It happens in both scanning options and crashes always since this feed is on.

6946

Probably a data tp which causes issues with some receivers. Where are you scanning from?

[tabriz]

There is a big problem in the device (x2 premium II)
When we turn off the set top box and the machine is in standby mode and hour markers are shown on the panel
If we turn on the set top box and the machine will boot image decoder takes a long time to come Rise
The major disadvantage of this device.

On other brands when we turn off the device and go into standby mode
and when Turn on the device by the Remote Controll with the power button as soon as possible turn on

[yosssi]

Probably a data tp which causes issues with some receivers. Where are you scanning from?

I tested it in two receivers and in both crashes. I scanning all sat and have this problem for test i try manual scan happens the same.
If need any data for could fix it tell me.

[eastof111]

Tabriz...

Try this... Backup your current database to a usb stick so you do not lose your sat settings. Reset the receiver to default factory settings. Turn off a/c power completely. Reboot and do blind scan on only one sat. If working ok, shut a/c power off to receiver again. Reboot. It should boot up pretty quickly and not the way you describe in your post. If everything working ok with one sat, reload your saved database from usb stick.

If it goes back to old problems after loading database, you may have a corrupt db. If so, you should reset everything and start all over to create a new database.

[Costactc]

I tested it in two receivers and in both crashes. I scanning all sat and have this problem for test i try manual scan happens the same.
If need any data for could fix it tell me.

I meant what part of the world do you live? I'm asking because those channels in your picture are for European footprint.

[yosssi]

Yes. In europe ku band.

[Costactc]

Yes. In europe ku band.

Just wanted to confirm, thanks for the info.

[tabriz]

Tabriz...

Try this... Backup your current database to a usb stick so you do not lose your sat settings. Reset the receiver to default factory settings. Turn off a/c power completely. Reboot and do blind scan on only one sat. If working ok, shut a/c power off to receiver again. Reboot. It should boot up pretty quickly and not the way you describe in your post. If everything working ok with one sat, reload your saved database from usb stick.

If it goes back to old problems after loading database, you may have a corrupt db. If so, you should reset everything and start all over to create a new database.

Dear Friend
You just do not understand my problem
I turn off the receiver after being in standby mode
Turn the power button on the remote control
The receiver comes quickly without booting up
Most of other brands such as receivers come up

[eastof111]

"Unfortunately, turning off the receiver gets the boot time is spent"

No, I guess I don't understand the problem.

[tabriz]

"Unfortunately, turning off the receiver gets the boot time is spent"

No, I guess I don't understand the problem.
What I mean is that after turning off with remote control
And the receiver is in standby mode
Switch on again by remote control
Immediately after standby mode without booting ... Receiver is turned on

[Costactc]

Both my x2 receivers boot up by themselves but I can't see where this would cause any issues.

[yosssi]

Just wanted to confirm, thanks for the info.

Looks like the feed change some data and now working and finish the scan without problem. if happens again would tell it. thanks.

6962

[dr.zin]

Dear Friend
You just do not understand my problem
I turn off the receiver after being in standby mode
Turn the power button on the remote control
The receiver comes quickly without booting up
Most of other brands such as receivers come up

I could be wrong but I think there was 1 firmware version in 2012 that did that

[tabriz]

I could be wrong but I think there was 1 firmware version in 2012 that did that

If possible, the new software can solve this problem
Thank you:bigthumbup:

[dr.zin]

i think all nt78326 based receivers boot that way(full boot)

[ghan]

You're a good friend

Receiver does not come up to me in Hong loader image I could not even help me

[yosssi]

the problem that report last days is back with the channel saved from other day the receiver crash also when put the channel of the problem.

[ghan]

the problem that report last days is back with the channel saved from other day the receiver crash also when put the channel of the problem.



Hi
I do not speak English regiment has Decoder above I do not know help me Thanks a rs232 cable

[ghan]

uhub0
uhub0: 1 port with 1 removable, self powered
irq_num = 36 controller added
irq_num = 36 skipped
os_notify: Host bus 80b2d804 going into suspend
Insufficient buffer,L=453!
wid=0x500, hight=0x2d0
Insufficient buffer,L=453!
wid=0x500, hight=0x2d0

[AVCTRL] vid start AR : 16_9
[AVCTRL] _AvctrlEvtVdecCallback frame rate --NTSC60--
[_AvctrlVdecStoreFrameInfoProc] DecodeOnlyMode, First Frame was decoded
[DDC_DATA] getDemuxNo erru8DecoderNo =1 *pu8DemuxNo=255
[DDC_DEC] mid_ddc_EvtDecodeCallback err line[1793]
[AVCTRL] _AvctrlEv
[AVCTRL] _AvctrlEvtVdecCallback sent vid stop to mid
[DDC_DATA] getDemuxNo erru8DecoderNo =1 *pu8DemuxNo=255
[DDC_DEC] mid_ddc_EvtDecodeCallback err line[1793]tVdecCallback sent vid dec ok
to midInsufficient buffer,L=453!
wid=0x500, hight=0x2d0
Insufficient buffer,L=453!
wid=0x500, hight=0x2d0

[AVCTRL] vid start AR : 16_9
[AVCTRL] _AvctrlEvtVdecCallback frame rate --NTSC60--
[_AvctrlVdecStoreFrameInfoProc] DecodeOnlyMode, First Frame was decoded
[DDC_DATA] getDemuxNo erru8DecoderNo =1 *pu8DemuxNo=255
[DDC_DEC] mid_ddc_EvtDecodeCallback err line[1793]
[AVCTRL] _A
[AVCTRL] _AvctrlEvtVdecCallback sent vid stop to mid
[DDC_DATA] getDemuxNo erru8DecoderNo =1 *pu8DemuxNo=255
[DDC_DEC] mid_ddc_EvtDecodeCallback err line[1793]vctrlEvtVdecCallback sent vid
dec ok to mid320 NOT Support this fucntion : LAYER_DISP_SetBorder
>>>>>>>>>>>>>>LAYER_DISP_SetVideoWindow:(0)
InHs:0, InVs:0, InHw:720, InVw:480
OutHs:120, OutVs:44, OutHw:720, OutVw:480
SrcW:720, SrcH:480, WindowWidth:0


LAYER_DISP_DisplayCtrl, 0, 0

[AVCTRL]
[8559]AVCTRL_AutoAdjustAudRAWMode TO MODE[3] RAW[2]/PCM[3]SetSpeed fail, STC is
invalid

[AVCTRL] _AvctrlEvtAdecCallback sent aud stop to mid
[AVCTRL] _AvctrlEvtVdecCallback sent vid stop to mid
Receive Stop command and Notify,command[0]

[AVCTRL] _AvctrlEvtAdecCallback sent aud stop to mid
Receive Stop command and Notify,command[0]
320 NOT Support this fucntion : LAYER_DISP_SetBorder
>>>>>>>>>>>>>>LAYER_DISP_SetVideoWindow:(1)
InHs:0, InVs:0, InHw:720, InVw:480
OutHs:120, OutVs:44, OutHw:720, OutVw:480
SrcW:720, SrcH:480, WindowWidth:0


LAYER_DISP_DisplayCtrl, 1, 0

[DDC_DEC] mid_ddc_SetAudioType err
[DDC_DEC] mid_ddc_StartAudioDecoding err
[AVCTRL] _AvctrlEvtVdecCallback sent vid stop to mid PowerOn = 0
IGM_HardwareInit
IGM_InitialiseTimers
Get DP Handle = 54440000
stDescPidOpen.u32DpHandle = 54440000
Get DP Handle = 54440000
stDescPidOpen.u32DpHandle = 54440000
Get DP Handle = 54440000
stDescPidOpen.u32DpHandle = 54440000
Get DP Handle = 54440000
stDescPidOpen.u32DpHandle = 54440000
Cannot engage Mobile font: ArInitFont () failed



error code (see bi_lib.h BI_ERROR_xxx): -51



+++++++++stCfgProxySetting.u8Enable = 1


normal get defacode=
.....


Actcoude
, MAC 06-0E-39-42lt cfg=255
###enter n-28-C2
[MMI] vid supportnit OK.....
[MMI] vid support param:mode if:0 ###ecType[rtService][532]###Netif0x10]
[MMI] vid support eneth):dhcp:1 ###port enDecType[0xce][536]###Netif param(d]
37]###Netif param(eth):[MMI] vid support enDecip:192.168.001.100 ###
[M]:_NET$$$$$$$$$$$$$$$$$$$$MI] vid support enDecTy$$$$$$$$$$$$!in dev(0)0x10]
[mid_net_if_ctrl:261]:r send request(4)!! pe[0x1]
[MMI] vType[0x2]
Create Instant Did support enDecType[0xelay Queue OK
[MMI] vid support enDecType[0x7] support enDecType[0x5]===
[AVCTRL] ecRet / DEC-RawStatus/ User-HDMI [0x2/0x0/0x3]
[AVCTRL] Sink AC3 [0] EAC3 [0]
[AVCTRL] The Sel-Path (bitwise) : < STATUS_NONE [0x0] STATUS_TRANSCODE[0x1] BY
PASS_HBR[0x2] BYPASS_DAC1[0x4] >
[AVCTRL] The DEC-RawStatus : (bitwise or)

[ghan]

You can not upgrade my receiver was broken friend with cable 232

[r10fret]

using the media player function when playing back verified good files the audio seems to get ahead 3 seconds of the video within 1-2 minutes of starting the file.

[Gary Bidwell]

I use it all the time and most all the time it works good. I have in the past seen it happen on one channel but do not remember which one.

[vicpro26]

X2 needs to check the Firmware in order to make it work with Newcamd servers using DES key other that 0102030405060708091011121314.
My service provider uses a different DES key and while the box says connected I get Scrambled Service all the time!

Just pass my request to the technical people!

[Costactc]

X2 needs to check the Firmware in order to make it work with Newcamd servers using DES key other that 0102030405060708091011121314.
My service provider uses a different DES key and while the box says connected I get Scrambled Service all the time!

Just pass my request to the technical people!


You are referring to the use of x2 receiver for hack. We only discuss true fta on our site and any other posts about iks will not be tolerated.

[vicpro26]

I am just asking for a new feature to be added, if it is possible, to a current functionality that the makers already included in their product.
I have not mentioned any hack.
Anyway your profile says that you are a SAT Junkie not a moderator.
I will not tolerate your tone!

[Costactc]

I am just asking for a new feature to be added, if it is possible, to a current functionality that the makers already included in their product.
I have not mentioned any hack.
Anyway your profile says that you are a SAT Junkie not a moderator.
I will not tolerate your tone!

Not a very good start for a new member. Des keys are part of one of the main features of iks hack and that discussion is not tolerated on this site, whether it's a feature of the receiver or not. Furthermore, I don't appreciate your attitude.

[eastof111]

I guess next time dealing with a Sat Junkie he/she will think twice! LOL

[el bandido]

X2 needs to check the Firmware in order to make it work with Newcamd servers using DES key other that 0102030405060708091011121314.
My service provider uses a different DES key and while the box says connected I get Scrambled Service all the time!

Just pass my request to the technical people!


You are referring to the use of x2 receiver for hack. We only discuss true fta on our site and any other posts about iks will not be tolerated.


I am just asking for a new feature to be added, if it is possible, to a current functionality that the makers already included in their product.
I have not mentioned any hack.
Anyway your profile says that you are a SAT Junkie not a moderator.
I will not tolerate your tone!

Looks like vicpro26 forgot to take his meds today?
We do not support satellite hacking here. If you need assistance with that, please visit Satellite Supreme, Home of Amiko North America satellite pirates. EB

[ViP3R]

LOL...vickpro26 needs a good old bar of soap in his mouth...and a spanking for being such a silly child...:th_tut20tut:

[eastof111]

Having a touch of the Monday morning blues due to no hack tv, how sad...:sadtear:

[Costactc]

Let's show him the door.....................

[crosspaws]

PLEASE please remove this quoted post this langue does not and should not be left to run across while browsing the forum.

Thank you,

[cpr43]

PLEASE please remove this quoted post this langue does not and should not be left to run across while browsing the forum.

Thank you,

Done!