Another problem

[rodder]

i do not know what is going on now i am trying to blind scan 95w C-Band and it will not let me change the frequency to c- band and it is set up right i deleted the blind scan plug in and installed it again but it did not help

[el bandido]

How many tuners are you using? Do you have separate tuners for C and Ku bands?

[Costactc]

I have not had any issues scanning c band on Galaxy 3c at 95w, but this is one of those sats where it does miss tp. I'm moving both my dishes over to scan each band individually. Tuner A is ku and tuner B is c band.

[el bandido]

Please list the transponders it misses.

[rodder]

yes separate tuners for C and Ku turner a is Ku and B is C-Band

[Costactc]

No issues on either band and I must say that my solo2 didn't miss any tp and scanned in several feeds-awesome stuff:


11545115461154711548

[el bandido]

Carefully check your antenna settings. I think you will find LNB 1 for tuner B has been assigned an universal lnb for one of the satellites in the satellite list. This error can be found in the receiver or by looking at the settings file.
You can upload your settings file in etc/enigma2 and attach it here IF you have not connected to any social media such as Facebook, OR IF you have not connected to any other place that requires a password. Facebook and other INTERNET passwords are stored in the settings file.

You can use a different LNB number if you want to run C and Ku bands in a single tuner. Here are some screenshots showing C and Ku bands on Tuner A.

[el bandido]

Excellent Costa! See if it will blindscan the 11804H 1250SR transponder on 87W Ku.

[rodder]

my sat list got corrupted real bad some how so i had to delete everything make a new sat list and start over

[el bandido]

Make back-ups. Then all you would need to do is reload the back-up.

[rodder]

yes i had a back up but i did not use it i started over fresh.

[Costactc]

Excellent Costa! See if it will blindscan the 11804H 1250SR transponder on 87W Ku.

Sorry for the delay EB, I just saw this post. TP 11804 on Ses 2 doesn't scan in on blind scan but does manually.

[rodder]

Well for me i can not leave good enough alone mine has been running fine the last couple weeks on OpenPli so today i wanted to try the Blackhole image i did not like it as good as OpenPli so i reloaded Opli and i am back to running normal again the problem is when i turn it on i still see the Blackhole screen for a couple of seconds how can i get rid of it.

[el bandido]

Do not worry about it. You are only seeing a picture or screenshot.
OpenPLI does not write to the boot start-up screen, but some images like BlackHole do. All you are seeing is a pre-loaded picture, so nothing to be concerned with. There are ways to change this picture to almost anything you want.

[rodder]

Thanks Eb

[el bandido]

BTW, If you want an easy way to fix it to a VU+ picture, then install a ViTi image, then install OpenPLi. ViTi uses a Vu+ logo for boot.

[rodder]

Ok Thanks

[rodder]

i don"t really like the ViTi Vu+ logo either are there any other images i should try before i reload OpenPli.

[el bandido]

OpenSpa is a bit different than most images. Maybe try it and HDMU. I will try to get you a loader for the boot picture later today so you can change what you see at boot.

[rodder]

i really like ths HDMU with its large type but it will not install the Blindscan plugin can i load it manually.

[rodder]

Are can i make the type larger in OpenPLi

[el bandido]

Maybe post a couple of screenshots of what you would like to change? The image is opensource, so you can make many changes to customize it.

Blindscan should be available in the "download" plugins under system plugins. Else install the blindscan files that I have posted.

[rodder]

yes the download plugin is there but it gives a error after downloading it. i need blindscan for both C-band and Ku band

[el bandido]

What error? We might be able to fix the error if it is known what type of error and the error information.

Have you tried to install any of these??
[Only registered and activated users can see links]

[rodder]

I just reloaded OpenPli that seems to be the image that works best for me