el bandido
08-26-2021, 10:21 AM
Flashing the Edision Mio line of receivers online is easy to do. Performing an online flash requires a good Internet connection and a working usb storage device that is inserted into the receiver. Online flashing is automatic with settings and most plugins or other addons being automatically installed without any input from the user. There is also an option to flash online without restoring anything if the user wants a "clean install"
Here are the steps needed to flash online:
(1) Install a Known-To-Be-Good blank or empty usb drive into the receiver that is at least 1 Gigabyte in size.
(2) In the receiver's menus, Navigate to Flash image (Menu--->Setup--->Flash image).
(3) Highlight the image you want to Flash and press the OK button on the remote.
(4) In the drop-down box, highlight the image you want to Flash and press the OK button on the remote.
(5) A slot menu will appear onscreen. Each slot will be listed twice. Select the slot you wish to flash that has with backup beside it. Press the OK button on the receiver's remote control to start the flash process.
Leave the receiver alone once the flash process starts, and it will automatically restore your settings and plugins. Some items may not be restored if they cannot6 be downloaded. This would include manually installed plugins that are not in the receiver's feeds.
For an automatic reinstall of settings and plugins, do nothing else. Go have a cup of coffee or do something else for 5-10 minutes. The receiver will automatically download and flash the image. The receiver will automatically reinstall plugins and other items, provided they are available on the Internet in receiver feeds.
If you want a clean install, perform the same steps, except select an image slot that has without backup beside it. It should be noted that if there are any valid backups on the usb drive, then they will be automatically installed if the user does nothing. It is best to use a blank or empty usb drive for clean installs.
Below are a few screen captures of Flash image.
17294
17295
17296
Here are the steps needed to flash online:
(1) Install a Known-To-Be-Good blank or empty usb drive into the receiver that is at least 1 Gigabyte in size.
(2) In the receiver's menus, Navigate to Flash image (Menu--->Setup--->Flash image).
(3) Highlight the image you want to Flash and press the OK button on the remote.
(4) In the drop-down box, highlight the image you want to Flash and press the OK button on the remote.
(5) A slot menu will appear onscreen. Each slot will be listed twice. Select the slot you wish to flash that has with backup beside it. Press the OK button on the receiver's remote control to start the flash process.
Leave the receiver alone once the flash process starts, and it will automatically restore your settings and plugins. Some items may not be restored if they cannot6 be downloaded. This would include manually installed plugins that are not in the receiver's feeds.
For an automatic reinstall of settings and plugins, do nothing else. Go have a cup of coffee or do something else for 5-10 minutes. The receiver will automatically download and flash the image. The receiver will automatically reinstall plugins and other items, provided they are available on the Internet in receiver feeds.
If you want a clean install, perform the same steps, except select an image slot that has without backup beside it. It should be noted that if there are any valid backups on the usb drive, then they will be automatically installed if the user does nothing. It is best to use a blank or empty usb drive for clean installs.
Below are a few screen captures of Flash image.
17294
17295
17296