TNAP-5-Test Thread

[el bandido]

TNAP-5 should be available as a test image soon, as time permits. TNAP-5 is based on OpenPLI and will contain python 3.9. Previous images of TNAP used a python 2 version which is outdated. Changing to python 3 requires the re-write of many files and some other adjustments. TNAP-5 will have a smaller number of downloadable plugins when compared to previous versions of TNAP, but it is doubtful that many North American users will notice this.

TNAP-5 should support some newer plugins such as Pluto tv. TNAP-5 will also contain some updates in Positioner setup and other places due to file re-writes or file updates. There will be less skins available on TNAP -5 because most of the skins were made using python 2. In a way, the change from python 2 to python 3 is a blessing because we will lose some things that were made years ago that no longer work, but are for some reason, still in the feeds.

TNAP-4.2 will be the last version of python 2. A small amount of updates are still being generated for python 2 images, but this is expected to stop in a short period of time. So we either move forward a bit with TNAP-5, python 3.9, or we don't move at all...

17469


17470

[cyberham]

Standing by to try loading TNAP 5. I've nothing to lose. I'm in an RV in the woods and my Edision Mio+ won't start at all now with my TNAP-4.2 loaded which used to work fine. A very hot trip in the car across the country may have been a factor. The Mio+ started initially OK, but venturing into Standby and Deep Standby resulted in it turning off and never coming back. I've been trying to load TNAP-4.1 from USB but the usual method doesn't work. It seems the Mio+ just won't recognize the USB stick.

[el bandido]

Carefully Check the power supply. Loading a different image will probably not solve anything. Will be best to start a thread if you need help with it.

[cyberham]

Thanks for tip. Output from AC adapter rated at 2 A was +12.12 V no load. Seemed a little low. Tried ham power supply with +13.8 V. Correct polarity. I couldn't resist trying. On Mio+ power on, a tiny puff of smoke came out of Mio+. I suspect I need to find a different hobby for now. We now return thread to TNAP-5.

[el bandido]

Open the MIO up by removing its case and check capacitors.

[Megatron817]

Testing Pluto Tv Bouquet and epg on OpenPli Py3 test image and it is working Pretty well. Pulled the bouquet file from PurE2 Py2 image that Pluto didn't work very well on and have to boot back in to PurE2 slot to update the Pluto epg. Ready tor Tnap5 for the full working Pluto TV now that I know it works with py3.

[el bandido]

What are you having to boot back and forth to update? Please upload whatever files you are using. Thanks.

[Megatron817]

On post 1 your picture number 2 it shows to press green button to create a bouquet. That will create the bouquet at ect/ Enigma2 and download the epg and picons. My epg .dat file is stored on the external hdd so when I boot to PurE2 image and press the green button in the pluto tv plugin epg .dat gets updated and going back to Openpli py3 image it uses the same epg.dat on the hdd. I moved the picons and the pluto.tv bouquet from PurE2 over to Openpl py3i. That is the only files i'm using.

[el bandido]

Things seem pretty stable. You may try one of these test images. We need to get the epg for Pluto tv working in TNAP if possible. I have not used Pluto TV yet. Thanks.

[Only registered and activated users can see links]

[Megatron817]

Pluto TV EPG is loading fine. Picons will show after a restart that is normal. Played a Pluto VOD for a minute to test and was fine. Pluto Tv Live channels are playing fine. Advertisements are playing normal so far. On my other test on Openpli py3 test image the advertisements did not always play properly. I suspecting Tnap5 may show the same issue. Time will tell.
Thanks!

[Megatron817]

EB how hard would it be to add the Pluto Tv package from the Tnap5 feed to the Tnap4.2 feed? I installed it on to Tnap4.2 this morning using the Tnap5 feed and it Installed fine and is working good so it is py2 compatible also.

[el bandido]

Which TNAP feed do you want it on?

I tried Pluto TV on TNAP 4.2, but the video would not play.

[Megatron817]

Don't worry about adding it to the Tnap 4.2 feed. I have a custom version of Tnap 4.2 With Kodi installed that may be what makes it work for my Tnap4.2 those extra bits from the kodi install. It probably wouldn't work on the stock tnap4.2
Thanks

[el bandido]

Okay.
Delete the Pluto TV plugin and run software update. Then you should see it in 4.2 feeds as shown below.

17483

[Megatron817]

ok I'll put a fresh copy of Tnap4.2 in a slot and test it.
Thanks

[Megatron817]

Yes Live pluto tv channels are playing on tnap4.2. Only problem was after pressing the green button in the pluto plugin once the download completes it stopped on wait...
I waited a few minutes but had to do an init 4 command waited a few seconds then init 3. After the restart it is fine with epg and Picons there.

[stephan94]

A question ,
in the multiboot of my MIO4K
there is in place 1 TNAP 4.0
in place 2 OpenPLI 7.3
in place 3 TNAP4.2
and in place 4 Openpli 8.2

Can I install TNAP 5.0 in place 1 instead of version 4.0?
there is only the multiboot zip version for TNAP 5.0, is it compatible with place 1 ?
I thought that for place 1 only the USB version was valid

[el bandido]

Multiboot image may be installed in ANY slot (1-4).

[Megatron817]

Here is a cool plugin I'm now using I found on the web called AJPanel-v7.2.0
Can use it to restart IPTV streams. Works great with Pluto TV when the stream mess up just press the green button while using the AJ Player Bar.
Works on TNAP 5 and TNAP 4.2

[sattech64]

I haven't played around much with Pluto tv but for the most part it seems to load ok. When I get some time I'm planning on a more in depth probe of it. I like some of Pluto's content

[Megatron817]

I haven't played around much with Pluto tv but for the most part it seems to load ok. When I get some time I'm planning on a more in depth probe of it. I like some of Pluto's content

The pluto tv VOD alone is what I like about it. You might need to update PlutoTv plugin. I did Here is the latest IPK that will fix the VOD.

[pa28pilot]

El bandido, Are those nightlies in your tnap5-images directory? I am happy to try them. As a North American who relies heavily on my motor, are there any particular things about the positioner code that you would like people to test? Thanks.

[el bandido]

What we need to look for is things tht don't work correctly, or system crashes. I will post an updated TNAP 5 as time permits, probably sometime in December.

Thanks.

[eelstrebor]

I just installed TNAP5 in slot 4 of the non-plus osmio4k. Front display shows "None" all the time when powered up but shows the correct time in standby. And it has a tendency to reboot on several menu selections. That's my report for now. I went back to TNAP 4.2.

[el bandido]

Usually reboots generate a crash report that explains or at least gives an idea of why the receiver rebooted. If you want to help fix it, then provide the crash reports.

Thanks.

[Megatron817]

Crash log for TNAP-5-Test 2023-01-06.Can't get past the setup wizard. Selected English then on the HDMI selection has a crash.17576
Edit got past the setup wizard by selecting RCA/ NTSC then after exiting the wizard went to the A/V settings and changed back to HDMI.

[Megatron817]

Couple more crash logs. One is when opening the EPG menu and the other is when opening the User interface menu.
blind scan is not opening no response from that menu item.

[el bandido]

Couple more crash logs. One is when opening the EPG menu and the other is when opening the User interface menu.

These two items are tied together with one file causing both problems.


blind scan is not opening no response from that menu item.
I don't "see" this problem. Any additional info would help with the blindscan issue.


Crash log for TNAP-5-Test 2023-01-06.Can't get past the setup wizard. Selected English then on the HDMI selection has a crash.enigma2_crash-TNAP-5-TEST.zip
Edit got past the setup wizard by selecting RCA/ NTSC then after exiting the wizard went to the A/V settings and changed back to HDMI.
The cause of this has been identified.

[Megatron817]

Tuners & scanning menu scroll down to Satellite Blind scan and click it nothing happens. Manual scan works. I've re flashed the Mio4k+ with Tnap-5 again and didn't restore anything both times. Same issue with blind scan.

[el bandido]

I don't have that problem with blindscan.
Anyway, maybe it will get fixed when the other files are corrected.Will try to do that this evening. Excellent work you do finding these issues!!!

[el bandido]

An online update should get rid of the menu crash(es).
Will have to look at the blindscan problem a bit. Don't know what is causing that as the problem does not exist in some other receiver models.

[Megatron817]

Thanks, working fine except blind scan. Did a reinstall and when it booted up did telnet opkg update and opkg upgrade. Got though the wizard and the menu items are ok. What is the telnet command for installing requests on Python 3 for Pluto TV to install and work?

[el bandido]

Will have to look for the requests. That can be built with the image I think.

In a way, this image has a ways to go, and in other ways, it is ready. You have the transition from python 2 to 3. Then you are mixing a bit of OE Alliance (OpenVix) code in as well. So it takes a bit to make all this play nice together.

[el bandido]

In Telnet:
opkg update
opkg install python3-requests


At the end of the install, you should see:

Configuring python3-chardet.
Configuring python3-ndg-[Only registered and activated users can see links]
update-alternatives: Linking /usr/bin/ndg_[Only registered and activated users can see links] to /usr/bin/ndg_[Only registered and activated users can see links]
Configuring python3-pysocks.
Configuring python3-certifi.
Configuring python3-urllib3.
Configuring python3-requests.

[el bandido]

Unzip the attached file and install plugin.py to: /usr/lib/enigma2/python/Plugins/SystemPlugins/Blindscan of receiver files. Restart enigma2 or reboot after doing this, then see if blindscan will work. Thanks.

[Megatron817]

Blind scan started but there was a crash during.

[el bandido]

Please see if this one works any better. Thanks.

[Megatron817]

That one was good. No problem found, did three test blind scans c-band lnbf ,Ku-standard lnbf and ku universal lnbf.

[lme]

I installed this image & crashed at video settings.
I skipped this stage and the installation went on. Went to Audio/Video menu and it was already on hdmi.
After that is good. I know the image is still in works, so i'm attaching the crush log here.
1758917590
Not sure if the crash log is from installation.

[el bandido]

Your crash shows a Videomode problem. This has been fixed. Please do a software update or in Telnet, opkg update && opkg upgrade

Thanks.

[lme]

Your crash shows a Videomode problem. This has been fixed. Please do a software update or in Telnet, opkg update && opkg upgrade

Thanks.

did a software update but nothing to update:

17593
but I did the telnet update.

[el bandido]

Is the video problem still there after the update? Thanks.

[lme]

Is the video problem still there after the update? Thanks.

No. The video setup was crashing e2 on the initial setup of the image. So I skipped that stage, and went ahead with the initial setup. After the initial setup, I checked the audio/video menu and fond that it was set to HDMI/720p !!
So the problem of video occures after the flash, on the initial video setup.
Sorry for the misunderstanding.

[el bandido]

A new weather info bar has been added for OpenPLi skins. This new bar is shown below, and the plugin that is needed for it is also shown.

Also new for TNAP images is Lamedb merger. This plugin allows two lamedb or channel files to be merged.

17595 17596

[lme]

Forgot to mention that there is no splash screen on start up, but I guess it's part of the "cosmetics" of the image to be fixed.

[el bandido]

The splash screen is working on other receivers. Edision MIO/MIO+ will need some adjustments, such as a different format.

[lme]

The splash screen is working on other receivers. Edision MIO/MIO+ will need some adjustments, such as a different format.

so, will have to wait for mio+ splash screen.

[el bandido]

Yes.
Receiver files come before the logos (splash screen).

[navagator]

A new weather info bar has been added for OpenPLi skins. This new bar is shown below, and the plugin that is needed for it is also shown.

Also new for TNAP images is Lamedb merger. This plugin allows two lamedb or channel files to be merged.

17595 17596

I'd like to give this new weather info bar a try. I currently have the Weather MSN Plugin installed, do I need to remove it first to avoid any conflicts?

Thanks.

[el bandido]

Weather MSN Plugin Should not bother anything. Try it and see.

[navagator]

I downloaded the plugin but I can't get it to work.

After entering my zip code and language, I get this error box

17601

Maybe I entered the language code wrong, I tried e, en, en-us, and english.

[el bandido]

What image version are you using? Something doesn't look right.

[navagator]

I just updated to 4.2.

[el bandido]

The InfoBarWeather plugin should not be available in TNAP 4.2. This thread is the TNAP-5 Test Image discussion. The InfoBarWeather plugin is available in TNAP-5.

[navagator]

I wondered if it was for 5.0 only, I almost asked first. I'll go ahead and remove it.

[Executive]

Just installed TNAP-5 into Slot 1 and the same thing is happening to me. When I click Satellite Blind Scan on the GUI nothing happens. If I telnet into the box and goto /usr/bin and run ./blindscan the program works and finds the transponders.

Executive

EDIT -> msg 37 from this thread fixed the issue.

[el bandido]

Did you do an online update after the install???

Corrections to the image have been made. You have to do an online update or a 1 line command in telnet: opkg update && opkg upgrade

[Executive]

I did but it didn't resolve the problem. It was only after I followed msg #37 that it worked.

[lme]

Trying to use the "Positioner setup" on circular left tps, and e2 is crushing:
sat: 40w, 47w, 82w.
176961769717698

[el bandido]

Interesting. I will see if I can fix that problem. I appreciate you finding it!

[el bandido]

Download and uzip the attached file. Install the file in your receiver at the location shown below, then Reboot the receiver. Problem should no longer exist.
/usr/lib/enigma2/python/Plugins/SystemPlugins/PositionerSetup

Or wait and it will be in the next build...

[lme]

Good. it is fixed now.
thanks.

[stephan94]

Hallo,
I have just installed version 5.0,
When I ask the question HDMI or RCA when I say OK, there is a green screen,
I also did the update
for the moment the only big problem : the blindscan doesn't want to work
( very annoying because it's its particularity with MIS and T2MI)
I press on blindscan, it does nothing, no green screen either, the receiver does not react.
the Blindscan plugin is well installed
Here is the crash log that is in the receiver

I have just made the modification to message 37: it works:thumbup:

[el bandido]

That problem should already be fixed. Do Online update or this in telnet: opkg update && opkg upgrade

Thanks.

[el bandido]

New Test Images are in these links:
[Only registered and activated users can see links]

[Only registered and activated users can see links]

[Only registered and activated users can see links]

The new TNAP-5 Test image is much more stable as compared to previous versions. It is suggested to install these images instead of trying to online update due to the number of changes in them. It should be OK to use a backup from a previous TANP-5 Test Image.

[Megatron817]

Loads and runs fine on first startup but after setup and a reboot it gets stuck on the Edision splash screen. This has happened twice the first time I did not auto restore. Scanned some channels and added my picons and did a reboot and it got stuck on Edision splash screen attempted to reboot with telnet a few times but would not so rebooted in another slot and reflashed again and it booted up fine but this time I did auto restore every thing looked good but after a reboot same thing happened stuck on Edision slash screen. I did FTP in and found a crash log. something about no framebuffer available. I'll attach the log.

[el bandido]

Which skin were you using?

[el bandido]

The Glamour skin has this problem:


Traceback (most recent call last):
File "/usr/lib/enigma2/python/Navigation.py", line 86, in dispatchEvent
File "/usr/lib/enigma2/python/Components/PerServiceDisplay.py", line 17, in event
File "/usr/lib/enigma2/python/Components/Sources/CurrentService.py", line 28, in serviceEvent
File "/usr/lib/enigma2/python/Components/Element.py", line 91, in changed
File "/usr/lib/enigma2/python/Tools/CList.py", line 7, in __call__
File "/home/pli/builds/tnap-5-12-8-2022/openpli-oe-core/build/tmp/work/all-oe-linux/enigma2-plugin-skins-glamouraurafhd/6.0.5+gitAUTOINC+e590bc542a-r0/image/usr/lib/enigma2/python/Components/Converter/GlamourAccess.py", line 1316, in changed
File "/usr/lib/enigma2/python/Components/Element.py", line 91, in changed
File "/usr/lib/enigma2/python/Tools/CList.py", line 7, in __call__
File "/usr/lib/enigma2/python/Components/Renderer/Label.py", line 25, in changed
File "/usr/lib/enigma2/python/Components/Element.py", line 18, in wrapper
File "/home/pli/builds/tnap-5-12-8-2022/openpli-oe-core/build/tmp/work/all-oe-linux/enigma2-plugin-skins-glamouraurafhd/6.0.5+gitAUTOINC+e590bc542a-r0/image/usr/lib/enigma2/python/Components/Converter/GlamourAccess.py", line 662, in getText
File "/home/pli/builds/tnap-5-12-8-2022/openpli-oe-core/build/tmp/work/all-oe-linux/enigma2-plugin-skins-glamouraurafhd/6.0.5+gitAUTOINC+e590bc542a-r0/image/usr/lib/enigma2/python/Components/Converter/GlamourAccess.py", line 999, in CamName
TypeError: exists() takes 1 positional argument but 2 were given

[Megatron817]

Which skin were you using?

The first try during setup I had changed the skin to default Pli skin and the second try the auto restore set it to the default pli skin so glamour skin wasn't being used.

[Megatron817]

Reflashed again on the third try no auto restore and left Glamour skin as installed and yes Glamour skin has a Problem and crash also after a channel scan and attempting to select a channel. I am thinking the first problem maybe related to the ATSC channels because after scanning those in and a reboot is when the stuck on the Splash screen happens. I need to reflash again and check that for sure.

[Megatron817]

Nope not related to the ATSC channels. I kept the Hauppauge disconnected and after the setup of one satellite position and scanned the channels all was good but after a reboot was stuck on the Edision splash screen.

[el bandido]

We will see if the Glamour skin can be fixed.

I cannot replicate your crash, so have no ideas about it for the moment.

[el bandido]

Please restart in debug mode as shown below. Doing this will put a complete debug file in /home/root of receiver files. Run the receiver till it crashes, then post the debug log. Maybe doing that will show us something...

17727

[el bandido]

I see the crash problem. Give a few minutes for a fix.

[el bandido]

Images updated in the links. Problem of crashing should be fixed.

Thanks Very Much for finding it.

[Only registered and activated users can see links]

[Only registered and activated users can see links]

Note: Do not load or use the Glamour skin until it can be fixed.

[el bandido]

MCelliotG has fixed the Glamour Skin issue. This work is appreciated!

Do an online update or in telnet, opkg update && opkg upgrade to fix the Glamour skin issue.

[el bandido]

What else needs to be added or fixed? The current TNAP test image is running fine on my receivers.

[Megatron817]

Working great Here. Somebody might want that info bar weather for the PLi skin. I don't see it in the download plugins but I don't really need it my self. Thanks EB.

[Megatron817]

Crash log attached. This was after the online update. Can't select network adapter.

[el bandido]

An online update should fix the network adapter. Thanks for finding this error!

[lme]

Is anywhere a menu for a full backup (image backup), on edision 4k+ ???
The only option is for settings backup.

[el bandido]

Use the BackSuite plugin in the Plugins menu.

[lme]

Use the BackSuite plugin in the Plugins menu.

Apparently doesn't work:

17742

[el bandido]

That problem should already be fixed. Please do an online update and try it again.

[lme]

That problem should already be fixed. Please do an online update and try it again.

Just did, but same result:
17743

..but there are files on the usb stick. I do not know if they can be used:
17745

[Megatron817]

Just did, but same result:
17743

..but there are files on the usb stick. I do not know if they can be used:
17745

Just move the kernel.bin with Dream-Explorer from the original tnap-5 to the osmio4kplus folder on your stick. BackupSuite did not create the kernel.bin but the rootfs.tar.bz2 is created.

[el bandido]

Excellent idea! I think this can be fixed properly.

[lme]

Just move the kernel.bin with Dream-Explorer from the original tnap-5 to the osmio4kplus folder on your stick. BackupSuite did not create the kernel.bin but the rootfs.tar.bz2 is created.

Which "osmio4kplus" folder ?
there are 2 of them:
17746

..and what is the "original tnap-5" ?

[lme]

I copy kernel.bin file from "TNAP-5.0-osmio4kplus_multiboot_ofgwrite" file (assuming this was the "original") , and I was able to flash another osmio4k+ with it.

[lme]

Infobarweather:
there is a time discrepancy on the infobarweather:
17747

[el bandido]

What time discrepancy on the infobarweather do we have? Slow, fast or??? This is a feature that I have not used.

[lme]

What time discrepancy on the infobarweather do we have? Slow, fast or??? This is a feature that I have not used.

As per the pic, infobar is ~1HR behind the box time.

[el bandido]

Infobarweather Is not in TNAP feeds. Where did you download the plugin from and what version number is it?

[lme]

Not sure; since version " TNAP-5.0-osmio4kplus_multiboot_ofgwrite" ?!?!
can't find the version #.

[el bandido]

To find the version of infobarweather:

Menu--->Plugins. Then press the red remote button. The version of infobarweather can now be seen under extensions.

[el bandido]

From what I see of the python code for infobarweather, there is nothing wrong with it. Looks like the time that is being displayed in infobarweather is the time the weather information was fetched. This is why you are seeing two different times.

[lme]

To find the version of infobarweather:

Menu--->Plugins. Then press the red remote button. The version of infobarweather can now be seen under extensions.

Red button will delete it !!!!

17748

[sattech64]

Not to change the subject here,but can we d an online update for TNAP 5 Now?


Thanks!

[el bandido]

Some online updates should be available. I am trying to fix the BackupSuite plugin which currently works on aome receivers, but not on Edision....

[el bandido]

Red button will delete it !!!!

17748

Pressing the red remote button while in that screen shown above Will Not delete anything. Instead a menu list of installed plugins and modules will appear, This is one area of the receiver where you can get some information about what is installed.

[lme]

Ok. that's all i can see:

17749

[el bandido]

An online update should fix BackSuite in the MIO receivers. Please let me know if you find anything else wrong.

Thanks.

17750

[sattech64]

Thanks for the info! And thanks for all the work do on this project!!

[el bandido]

Are there any more problems or issues?

Please do an online update, then check for errors. Thanks.

[Megatron817]

Are there any more problems or issues?

Please do an online update, then check for errors. Thanks.

Haven't found any. Thanks.

[lme]

Same here: none.

[maor77gt]

Greetings from El Salvador, at this moment I am going to install TNAP 5.0 in my Edision OS Mio 4k Plus, it is possible to install OSCAM 11719

[el bandido]

Greetings from El Salvador, at this moment I am going to install TNAP 5.0 in my Edision OS Mio 4k Plus, it is possible to install OSCAM 11719

Edit the /etc/issue file. Change it to openpli.

[el bandido]

Some small changes have been made in the enigma2 scan file(/lib/dvb/scan.cpp). The scanning hack for Dish/Bev has been removed. This hack was introduced some twenty years ago, and should no longer apply to us. Therefore it has been removed.


/* NA scanning hack */
switch (servicetype)
{
/* DISH/BEV servicetypes: */
case 128:
case 131: /*Sky UK OpenTV EPG channel */
case 133:
case 137:
case 144:
case 145:
case 150:
case 154:
case 163:
case 164:
case 166:
case 167:
case 168:
servicetype = 1;
break;
}

This code can be added back if needed, but I doubt anyone notices it missing. Removing it may/may not help in transponder scanning. But if we are not using it, then it shouldn't be there.

Some old blindscan code has also been removed. Years ago we had this:


* For DVB-S, you need to provide a list of 4 transponders for each orbital position:
* one for each polarity (H/V or L/R), one for each band (hi/lo).
* The frequency defines the starting frequency within the desired band.
* The symbolrate defines the frequency search range, in MHz (frequency / 1000).
* The polarity defines on which polarity the search should run.
* All remaining transponder parameters will be ignored.
* So for each orbital position, 4 blindscan iteration runs will be done, one for each polarity/band 'quadrant'.

I don't think that blindscan stuff has anything to do with us because all of our receivers today use blindscan binary located in /usr/bin.

An online update after today should include the changes. If the scan becomes problematic, then these items can be returned to the code.

The word "Test" has been removed form the code. this leaves us with TNAP 5. An extra copy of the tuner driver for osmio4k receivers is currently being put in /etc/enigma2. This issue and a couple more little things should be fixed.

[el bandido]

The previously mentioned changes to the scan file do not seem to be hurting anything so the changes will stay for now. A ku scan of 103w looked good and is shown below:

< File created on Sunday, July 16, 2023 at 14:05:56 >
< Satellite = 103.0W Ku-band T10/T12 & SES 3 >
< Receiver = edision osmio4kplus >
< Enigma2 Image = Tnap 5 >
< Kernel Version = 5.15.0 >
< DVB Driver Date = 2021-11-03 >
< Blindscan Frequency Range = 11550 to 12750 MHz >
< Blindscan Symbol Rate Range = 1 to 60 Msps >
< Blindscan Only Free Channels or Services? = False >
< Tuner = Tuner A: Availink AVL6261 (DVB-S2X) >

< 'DVB-S2 QPSK 11704V / 3650 / 3/4' > Tp# 1
< 'DVB-S 11708H / 1013 / AUTO' > Tp# 2
< 'DVB-S 11710V / 1107 / AUTO' > Tp# 3
< 'DVB-S2 8PSK 11911H / 4600 / 3/4' > Tp# 4
< 'DVB-S 11937V / 1013 / AUTO' > Tp# 5
< 'DVB-S2 8PSK 12069V / 17144 / 5/6' > Tp# 6
< 'DVB-S2 8PSK 12080H / 29971 / 5/6' > Tp# 7
< 'DVB-S2 8PSK 12120H / 29999 / 5/6' > Tp# 8
< 'DVB-S 12144V / 19999 / AUTO' > Tp# 9

A complete file of this scan is attached.

To a degree, TNAP 5 is a basic rewrite of the python files as compared to previous versions. This rewrite was needed if the image had any kind of chance for being updated in the future. A lot of plugins for skins and other items will be missing because they are not compatible with the python upgrade. New plugins and updates to the older plugins will happen over time. This includes skins. But for now, it is what it is.

Bugs or crashes may still exist in TNAP 5. The only way to fix them is for people to use the image and report the problems or issues. Right now, TNAP 5 as a whole should be a good, solid image because it has been tested as thorough as possible with the users that we have. All efforts in testing, comments and bug reports are appreciated!

This TNAP 5 thread is Closed. Any future problems or issues should be discussed or reported in the TNAP 5 release thread. Thanks to all who participated!