Tnap octagon sf8008

[mlsat2]

Hi i can install this image on my uclan twin 4k pro is clone of octagon i have muliboot already installed. Mlsat2

[el bandido]

Welcome to Legit!

You can do that but the remote probably will not work. Where are you located?

[mlsat2]

to near montreal qc canada

[el bandido]

Multi-boot and recovery images for the 4kpro are in the link. I have no real way to test these images without the proper receiver, but they should work for you.

[Only registered and activated users can see links]

[mlsat2]

Thank you i will test it this weekend

[mlsat2]

Have installed ..remote is ok..thank you i go to explore this.

[stephan94]

Hi el bandido
I also got a Uclan Ustym 4K pro
and I just loaded TNAP 4.2 on it.
To make it work (in the flash image menu) you have to remove "ofgwrite" in the ZIP name of the ZIP otherwise it doesn't work.
I am discovering this receiver.
Contrary to the Edision MIO4K it does not find MIS and T2MI alone
with the blindscan, they have to be in an xml to be able to read them.
On the other hand, it has a particularity
it can read frequencies with very small SR
here an amateur radio frequency on 26°East (with a special LNB that goes
below 10490.)
It also has a very good sensitivity with weak signals.

[stephan94]

Hello ,
with the Uclan Ustym 4K pro can we use the "extra" plugins "T2MI" and "No-T2MI" ?
These plugins were developed for the MIO4K tuner.
the Uclan has another tuner, does it work ?
if we try, can it be a danger for the Uclan and its tuner ?

[el bandido]

Those plugins are only for the osmio receiver. They will not work in other models.Thanks.

[stephan94]

Hello El Bandido
At the beginning of 2022 you wrote your TNAP 4.2 image, starting from SF 8008, for the Uclan Ustym 4K pro.
Is it possible that you could do the same thing with the TNAP 5 version with the addition of the Ocean04
modifications that you have just successfully achieved with the SF8008 (supreme)?
I know that the "SF8008" and the "SF8008 supreme" are a bit different, but is it possible, or is it hopeless?
thanks in advance

[el bandido]

The enigma2 is in the build for every receiver. This means the changes ocean04 has made will be in every receiver that is built. You could build a receiver, then change the enigma2 and build more receivers. But that is extra work. So the changes will be in all supported TNAP receivers starting in version 5.1.

[stephan94]

It's a very nice surprise, thank you very much.
But as in 2022 you did this adaptation for the "Ustym 4K pro" (which I don't think you own) in a quite exceptional way
I didn't know if it would be possible.
Thanks in advance.

[el bandido]

Hello El Bandido
At the beginning of 2022 you wrote your TNAP 4.2 image, starting from SF 8008, for the Uclan Ustym 4K pro.
Is it possible that you could do the same thing with the TNAP 5 version with the addition of the Ocean04
modifications that you have just successfully achieved with the SF8008 (supreme)?
I know that the "SF8008" and the "SF8008 supreme" are a bit different, but is it possible, or is it hopeless?
thanks in advance
You want new image for Ustym 4K pro? Do you have the old Pro or the new Pro? The new Pro is the same as the SF8008 Supreme.

[stephan94]

You want new image for Ustym 4K pro? Do you have the old Pro or the new Pro? The new Pro is the same as the SF8008 Supreme.

Hallo el bandido
My Ustym 4K pro is the old version (I think) as it dates from 2022.
Is it possible to do anything with it?

a screenshot from Uclan
it seems to be the same as the octagon supreme