E2 file

Are there a newer E2 file then this OpenAR-P_OE2.0_211_Alien2 for the Golden Media Spark-Triplex

Spark 7162 is the name for that receiver. It takes the same E2 files as the Amiko Alien2.

I will see if I can find a recent file for you later today.

Try any of the usb images the link.
Example:

Quote:

---

USB Image: HDMU_15148_E2_spark7162_217_git_4163_nodebug_mix_U SB.tar.gz

---

[Only registered and activated users can see links. Click Here To Register...]

How do i load this it has 19 folders in it when you unrar?

Wrong one! Sorry!

Try the flash instead.

Quote:

---

Flash Image: HDMU_15148_E2_spark7162_217_git_4163_nodebug_mix_F lash.zip

---

Got it loaded EB but none of my wifi adapters will work Thanks for the help

Drivers for most wifi adapters should be available in dowoadable plugins. Let me know if you can find them.

For some reason it has went in to a boot loop.

Reload the image. Start fresh.
There are a couple of ways to find out why it is looped, but reloading the image is easy.

I have tried a couple of times still dose it

Are all devices and cables for Internet disconnected from the box?

Try loading a different flash image from the same page. We will try to find you another type of image if the bootloop continues with a different image file.

there is no internet it has to run on wifi. i loaded a older image 4163 and it did the same thing i think this side of the receiver is bad i was able to boot it back to spark and it works fine

Well i was able to load the Vix 1.0 beta you have on here but still no wifi trying to find a open pli image that will work

Wifi drivers are not installed by default in most enigma2 images. You have select the driver you need from downloadable plugins.

I have no internet at receiver at all to download it.

What is the make/model of the wifi device?

I was able to load open atv no wifi did not like it at all tried to load the new file HDMU 4163 went in to a boot loop again
eb i have a X2 xsquire and a TP-Link Model TL-WN725N this is the one i used with my Vu+

I got this in it now PKT_HYPERION_5_1_GM7162_FLASH which looks ok but still no wifi how do i get my sats file in it.

Those wifi device names do not tell us much. For example, X2 does not make wifi devices:They buy them from someone else such as Ralink.

You can find the correct wifi device name by plugging the device into a Windows computer, then look for the device in Device Manager. In a linux computer, plug the device in open a terminal window, and then type lsusb.

Probably the easiest way out of a situation like this is to move the receiver to an Internet connection, download the wifi driver for it, then move it back.

The x2 wireless adapter is a Ralink RT5370, the TP link is a Realtek chipset but not sure what one.

Yes the X2 is a Ralink RT5370

Even if I find that driver, you will have a hard time loading it in that box without telnet.
Best thing to do is move the box to the Internet and load the driver for wifi.

I got a small tv and hooked up my receiver at my computer was able to get wifi working usein OpenPli 27.10.2014 but it has no plug in feed