So I have an Edision Mio+ 4k with two fixed dishes at 87”w and 103w.
It took me way too long to figure out how to use a diseq 4x1 switch because of bad assumptions on my part!
I have two standard 10750 LNBs on 2 dishes. I assigned LNB 1 to my standard ku lnb 10750 and selected lnb 1 for both
DOH!!!
What a dumba$$
You don’t tell the the receiver what all the lnbs are and assign them all to to that type. Each lnb is a physical entity and each lnb is different
So once I figured that out, I realized that I didn’t have 2 lnb 1s at 10750, I had lnb 1 at 10750 and a second one at 10750
I know. I know. Y’all that have done this for years would never have forked this up… but maybe another newbie will.
Peace