GeoSat Pro 90 Dish Vs DMSI HotDish90
I have both of these dishes and for some reason, I can't get my GSP to come anywhere close to the performance of the HD90. I have the GSP on a fixed dish setup currently but I have tried it on the same pipe as the HD90 (motorized) is located. I have tried numerous LNB's as well as every configuration of the assembly I can find. Are there any known pitfalls to the dish such as a step I'm missing during assembly or setup? I know the GSP is slightly smaller than the HD 90 but not by enough to cause the problems I am running into. I am using it currently pointed at SES2 and there is quite a bit of Q change between the two dishes, for example making the difference of LPB locking on the HD and not on the GSP.
Thanks ahead of time for any suggestions
WT
1 Attachment(s)
Addendum to GeoSat 90 Dish Problem
I have checked the dish with the string test and they all meet perfectly in the center. I have a strange feeling that something is whacky on the feed arm. The pole is plumb and the dish has been tried on different confirmed working mounts with no difference. I lined up a different LNB day before yesterday and 7.6 Db C/N was the best I could scrounge on the CNN carrier on SES2 according to my Super Buddy meter and for kicks tried it with my FS1 and it was within 1 Db of the SB
For what it's worth I have attached some photos for reference.
Thanks to everyone for the ideas!