You might try a different usb stick, sometimes the receiver may work with another name brand.
Printable View
You might try a different usb stick, sometimes the receiver may work with another name brand.
Tried three sticks still does not work
Try reloading the entire firmware.
El bandido I tried reloading the entire firmware -- that didn't work either. Ever since I changed my receiver to Ice Crypt v.2.11.49 my receiver will not accept anything from the USB stick. Thinking about changing back to Raptor firmware, is that possible, if that is possible could you please send me the files on how to do it. I hate to do it, because I like to be able to name the satellites in numbers.
Has Raptor come up with a firmware with all satellite numbers in them? this is what I have now -- but there are no numbers to program into my motor that will mess up my other receivers. Thanks in advance. [Only registered and activated users can see links. Click Here To Register...]
Only Icecrypt firmware will do what you want. The latest firmware (2.12.18) for other receiver versions only addresses youtube access. If all you use the receiver for is satellite viewing, the latest Icecrypt firmware you can find will do the job, as newer firmware for other versions of the receiver do nothing to improve satellite reception.
Edit: Didn't realize Icecrypt had the newest version on their site. Uploaded [Only registered and activated users can see links. Click Here To Register...].
If someone has a Raptor they wish to sell please PM me. Thanks!!!
Have an interesting issue...my number 2 tuner ( both are dvb s2) has something wrong with it. It puts out power, blindscans in tps, but has no stream.....no channels play or scan in. Everything works fine with tuner one...have moved tuner 2 to tuner 1 slot and no difference....again voltage and diseqc commands are perfect...just no ts stream. Any suggestions are welcome. I have looked at tuner and doesn't appear to be damaged. Same issue with original and e2 firmware...Thanks in advance!
Logically you seem to have tried to eliminate errors. If tuner one works in slot two, it would seem to indicate that the slot is ok. If tuner two does not work in slot one, it would seem that the tuner module may be the culprit. Just for the heck off it, have you tried back loading an older image to see if you still have the same problem? Or, even another brand of image?
Worst case, if you need another tuner:
[Only registered and activated users can see links. Click Here To Register...]
Damn, they're getting greedy......