Page 1 of 3 123 LastLast
Results 1 to 10 of 21
  1. Collapse Details
    Pansat 9200HD PVR
    #1
    Join Date
    Dec 2010
    Location
    Calgary, AB
    Posts
    13,910
    Post Thanks / Like
    Contribute If you enjoy reading the
    content here, click the below
    image to support our site.
    Click Here To Contribute To Our Site
    Technical Specifications

    # Dimensions (WxDxH): 340 x 245 x 65mm
    # 1 Input Connector F-type, IEC 169-24
    # IF Input Frequency 950MHz to 2,150MHz
    # IF Loop Throughout 950MHz to 2,150MHz
    # Input Level - 65 dBm ~
    # 25 dBm
    # LNB Power 13 / 18VDC / 500mA Max
    # DiSEqC Control 1.0, 1.2 & USALS Compatible
    # Bandwidth 22KHz Tone
    # (22 +/- 4KHz. Amplitude : 0.6 +/- 0.2V)
    # Modulation Method LDPC/BCH(DVB-S2) 8PSK/QPSK (Option)
    # DVB-S QPSK
    # Symbol Rate LDPC/BCH(DVB-S2) 8PSK/QPSK : 10-30Msps (Option)
    # DVB-S QPSK : 1-45Msps
    # Viterbi Decoding Rate 1/2,2/3,3/4,5/6 and 7/8
    # Bandwidth 36MHz
    # LDPC/BCH Punctured Code. 1/2, 2/3, 3/4, 3/5, 4/5, 5/6, 8/9
    # 9/10 in DVB-S2
    # Terrestrial Tuner ATSC A/53 compliant 8/16VSB and MMDS 2/4/8VSB receiver
    # ITU-U J.83 Annex B/C, SCTE DVS-031 compliant 64/256QAM receiver
    # MPEG transport Stream A/V Decoding
    # Demultiplex According to ISO/IEC 13818-1(MPEG-2 system)
    # Input stream Max. 90Mbit/s
    # Aspect Ratio 4:3(default), 16:9 letterbox
    # Video Deocding ISO/IEC 13818-2(MPEG2 vidoe) MP@HL,ISO/IEC 14496-10 HP@L4
    # Video Resolution 480p or 720p, 1080i
    # Audio Decoding ISO/IEC13818-3(MPEG2 Audio/MUSICAM),
    Dolby AC-3
    # Audio Mode Single Channel/Dual Channel, Stereo, Joint Stereo
    # Video Ouput HDMI/HDCP, RCA
    # Microprocessor & Memories
    # Main Processor ARM926
    # CPU Clock 280MIPS
    # Flash Memory 8 Mbyte
    # SDRAM 128 Mbyte
    # EEPROM 32 Kbit
    # Data port -Connector 9 Pin D-Sub Type
    # Protocol RS232 Asynchronous
    # Data Rate Max. 19.2Kbps 115.2K
    # A/V output
    # Digital output HDMI/HDCP, YPbPr
    # Video RCA 1 output
    # Audio RCA 2 output
    # Digital Audio 1 optical output S/PDIF
    # Front Panel Smart Card Slot (Optional) 1 Embedded Slot
    # 4 Digits LED Channel Number Display
    # 8 keys Power, Channel Up/Down, Volume Up/Down, Menu, Exit, OK
    # USB USB2.0 Host
    # Rear Panel
    # IF Input F-type Connector
    # IF Loopthrough output F-type Connector
    # 6 RCA Video, Audio L, Audio R, YPbPr
    # Modulator F-type
    # S/PDIF Optical
    # S-Video
    # HDMI Type A
    # RS232 Serial Port 9 Pin D-Sub Type
    # UHF Optional U-30 Kit Signal In ATSC RF Signal Input
    # eSATA Port For External HDD
    # Remote Control
    # Type Universal Remote
    # Battery 2x1.5V AAA Type
    # Electrical and Mechanical
    # Input Voltage AC 90-250V, 50/60Hz
    # Power Consumption Max. 45 Watts
    # Weight 2.5kg
    # 2-Year Manufacturer Warranty. Made in Korea.

    click click b00m
    Reply With Quote
     

  2. Collapse Details
    #2
    Guest Guest
    I kind of miss not using my Pansat receivers, with the exception of fine tuning outdoors. I saw Colossus picked up a Pansat 9200 hd unit and will be picking one up as well tomorrow, I'm not sure if it's equipped with the s2/8psk board but will order one if necessary.
    Reply With Quote
     

  3. Collapse Details
    #3
    Join Date
    Dec 2010
    Location
    Calgary, AB
    Posts
    13,910
    Post Thanks / Like
    Quote Originally Posted by Costactc View Post
    I kind of miss not using my Pansat receivers, with the exception of fine tuning outdoors. I saw Colossus picked up a Pansat 9200 hd unit and will be picking one up as well tomorrow, I'm not sure if it's equipped with the s2/8psk board but will order one if necessary.

    I think I might have one..let me know..

    click click b00m
    Reply With Quote
     

  4. Collapse Details
    #4
    Bellboy Guest
    Quote Originally Posted by Costactc View Post
    I kind of miss not using my Pansat receivers, with the exception of fine tuning outdoors. I saw Colossus picked up a Pansat 9200 hd unit and will be picking one up as well tomorrow, I'm not sure if it's equipped with the s2/8psk board but will order one if necessary.
    I pick mine up on e-bay for $100 with shipping didn't have the s2/8psk board.
    Thats what I'm going to use for my C band.
    Reply With Quote
     

  5. Collapse Details
    #5
    Guest Guest
    Picked mine up today in Montreal for $100 as well and doesn't have the s2/8psk for fta which I'm going to add as soon as I find the best price and place to buy one. I already had given my word to the seller but many thanks anyways for the offer Viper.
    Reply With Quote
     

  6. Collapse Details
    #6
    Bellboy Guest
    I pick up my Board from ricks. 110.00 with shipping
    Reply With Quote
     

  7. Collapse Details
    #7
    Guest Guest
    I was looking at rick's yesterday but somebody local has one and I'm just waiting to get a reply. Rick's is ok but I won't get the board for 10 days and I could pick the other one up on Monday.
    Eh Viper, I was just talking to my neighbour who already has a 9200 and wouldn't mind having another one. How about a swap of yours for one of my azbox ultra stb?
    Reply With Quote
     

  8. Collapse Details
    #8
    Guest Guest
    Great investment but can't wait to get the s2/8psk board- ordered one from rick's.
    Reply With Quote
     

  9. Collapse Details
    #9
    Join Date
    Feb 2011
    Location
    New England
    Posts
    3,550
    Post Thanks / Like
    So Rick's is the best deal for the s2 board? I just picked up a 9200 and am interested in the s2 function.
    Reply With Quote
     

  10. Collapse Details
    #10
    Guest Guest
    My s2/8psk board just arrived, got some install work to do. It's really remarkable how many s2 channels are up there after using my 9200 on c band scans the last 10 days. I've also heard that this box heats up so I have a laptop cooling fan working with the unit.
    Reply With Quote
     

Page 1 of 3 123 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •