Translated From German to English:
Quoted from "pinky1981"




here the first "beta to be regarded as" evo image
spark for the triplex (7162) box!

[Only registered and activated users can see links. ]


flashed wirds as Evolux!
This image is NOT for gm990 + co!
exclusively for GM TRIPLEX7162 boxes and identical as Amiko alien2 etc.!

imho is just e2pli!
it is a pure e2 image!

known bugs:
-spdif/coax seems flatly at least here via coax cable no sound!
ton so only via hdmi!

-On time of boot is wrong!
Please go down to once after firstboot box properly and start on a transmitter can be as ard / zdf the time of send them along!

-Please after firstboot vali-hd-nano skin change because this is the best!
(Mini-pic on hdtv is chopped shown in the skin which is not be harmful to the function! On SDTV is mini-pic ok!)
please no oupdate perform because not finished for triplex and this would run an update of gm990!

other info:
Tunera = dvb-t
tunerB = sat1
tunerC = sat2

Tunera can switch in / etc / init.d / rcS between DVB-T and DVB-C:
insmod $ MODDIR/spark7162.ko Union tuner type = t # t = terrestical, c = cable
change and must be rebooted for tunerconfig again made! (default budget dvb-t)

flash manual / readme note (goes like any other jffs e2 img to flash!).
- Use fat32 formatted stick
- Folder "enigma2" Create stick
- E2jffs2.img + uImage in folder "enigma2" Copy
- Disconnect power from the triplex-box
- Usb-stick stuck in the rear usb slot
- Box again provide power while the front panel of the box "ok" key held down to "forc" appears in the display
- Now press the down arrow ("ittle" appears in the display)
- Now press the right arrow ("fact" appears in the display)
- Box is then flashed and it seems "U LD" in the display
The entire process takes a few minutes so be patient!