Results 1 to 4 of 4
  1. Collapse Details
    Question about bootloader
    #1
    Join Date
    May 2012
    Posts
    258
    Post Thanks / Like
    Contribute If you enjoy reading the
    content here, click the below
    image to support our site.
    Click Here To Contribute To Our Site
    I have a question for club members....and I know this is off topic, but i figured the members of this subforum would be very knowledgeable and tell me the correct answers.
    I have had a NfusionHD and it has the same processor as many of the fortis models:

    MICROPROCESSOR & MEMORIES
    * Main Processor : STI 7101
    * CPU Clock : 266Mhz
    * Flash Memory : 4 Mbyte + 1Gbyte (Nand flash memory) default
    (16Gbyte nand flash memory : Optional)
    * DDR SDRAM : 192 Mbyte
    * EEPROM : 32 Kbit(Optional)

    The nfusion is a good receiver but has had no software support for ages. I use it only for legit fta use...but that is limited due to qpsk tuner only. My question is could the bootloader 6.26 be loaded on it to try e2 on it form a usb stick? As of now the reciever is limited and losing it would not be a huge loss. If i can get e2 to load Imay be able to use my prof 7500 as another tuner for it and it pick up s2 signals. The boxhas a great picture and I like to experiment any way. bricking the box would not ruin my day. I appreciate all of your inputs and sorry for putting something non raptor here...and I thank you for your time and thoughts.

    ENERAL FEATURES
    * Free To Air Channel Reception Only from Satellite and Terrestrial broadcasting
    * IPPVR (Audio & Video recording to remote PC via LAN)
    * Dual Inputs (Satellite & Terrestrial) :
    -Fully Complies with ATSC HDTV (VSB) & DVB-S MPEG 2
    -ATSC Tuner (LG NIM Type) & QPSK Tuner (LG NIM Type)
    -Decodes All ATSC HDTV Standard Video Formats
    Including 480i / 480p / 720p / 1080i
    -Selectable Output Video Format : 1080i / 720p / 480p / 480i
    -Standard Definition/High Definition contents
    (MPEG2 and support MPEG4 AVC/H.264)
    * 2 x USB 2.0, PVR Function Supported : Record & Play with an external HDD
    * High Definition Video Output : HDMI and Component (Y/Pb/Pr)
    * Audio Decoding : ISO/IEC13818-3(MPEG-2 audio/MUSICAM) Dolby AC-3
    * Full compliant of MPEG-S Digital & DVB broadcasting
    * 950-2150 MHz Input Frequency (IF Loop Throughout)
    * Satellite Scan
    Reply With Quote
     

  2. Collapse Details
    #2
    Join Date
    Dec 2010
    Location
    Atlanta, Ga.
    Posts
    8,188
    Post Thanks / Like
    Check again and you will find that the Raptor nor the Anaconda have the same chip as the Nfusion. (STi 7110 is the Anaconda.)
    .
    .
    .
    Meine Dreambox One ist ein Stück Scheiße!.
    Reply With Quote
     

  3. Collapse Details
    #3
    Join Date
    May 2012
    Posts
    258
    Post Thanks / Like
    you are correct...but the koala does. I assume the koala runs e2 and has a bootloader. So I guess the question is will that work?
    Thanks EB!
    Reply With Quote
     

  4. Collapse Details
    #4
    Join Date
    Dec 2010
    Location
    Atlanta, Ga.
    Posts
    8,188
    Post Thanks / Like
    I do not have either one of those receivers so I cannot tell if it will or will not work. The odds of it working are slim though because i do not see much that is common between the two receivers.
    Try it and see how far you get with it. You will learn something by trying!
    .
    .
    .
    Meine Dreambox One ist ein Stück Scheiße!.
    Reply With Quote
     

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •