Quote Originally Posted by el bandido View Post
5000 Khz = 5Mhz.
15000Khz = 15Mhz.
If you change the scan step to 15000, then you may miss at least two 4 Mhz transponders in one scan step!
How many transponders are missed with the 15000 setting will depend on the spacing of the transponders. I prefer using a much smaller step than this. EB
at 5000 the scan step is good for most satellites except Sat Mex 6 which you really need to set it at 1000 for that satellite since the spacing is so close over there.