Turbosat, I looked on Amazon didn't find switches there. I did find them on Ebay. So ordered a couple, Got them today and tried them out. They both worked fine. Thanks for the tip, Know if a couple of firmware problems could be solved things would be great..
Thread: X2 Switch Problems
Results 11 to 16 of 16
-
08-24-2013,09:43 PM
-
08-26-2013,04:42 AM
Hello guys,
I am having an issue with the receiver, in the setup menu the 22khz is greyed out , i want to use it with my zinwell multiswitch.
I have august firmware loaded,multiple factory resets,..am i missing something?
Thanks,
D
-
08-26-2013,05:22 AM
22KHZ is grayed out when you choose a universal LNB. Try changing to standard option. If you still want to use the Universal with the 22khz ON you will need to choose 9750 lnb option.
X2 Premium III HD, Openbox X5/ S10, Gsky V3/V6, iSmart m100
-
08-26-2013,05:16 PM
Thank you Carlos, I never thought of that, it worked like a dream. I feel really dumb now. lol
-
08-26-2013,10:54 PM
Glad it worked out for you Marv. Nothings more aggravating than a switch that won't switch!
-
08-27-2013,08:31 AM
Turbo or anyone with experience using single Ecoda switches:
I have a question for you. If I have 2 sats (2 LNBs) with double output each and I used one output from each with an Ecoda sets at 22Khz On and Off for each sat connected to a 1.0 diseqc switch. Will the Ecoda scans both polarities (H/V) 13/18V?? Thanks!!X2 Premium III HD, Openbox X5/ S10, Gsky V3/V6, iSmart m100