Have moved my x² HD to the shop and am now stuck in PAL mode. How does one change back to NTSC? Would be a good sticky for the key presses involved. Just thought I'd ask first before I have to run the stb back and forth from the shop to the basement in the house, quite a jog. Must be the TV in the shop. Thanks in advance!
Happy Testing!!!
Thread: PAL 2 NTSC How2?
Results 1 to 5 of 5
-
PAL 2 NTSC How2? – 09-10-2013,06:17 PMX² HD Premium 36" 87 - 125 Ku
10' Unimesh 741 lnbf 97 C
-
09-10-2013,06:39 PM
Once it boots completely
Menu
Right arrow 3 times
Down arrow 3 times
OK
Down Arrow 2 times
Right or left to change Video resolution
You can also try the V-Format boton (FORMAT) below the REC boton. Press , wait a minute, retry and wait till you get videoX2 Premium III HD, Openbox X5/ S10, Gsky V3/V6, iSmart m100
-
09-10-2013,06:44 PM
IF that fails try a hammer...lol...ok kidding, that should do the trick...
click click b00m
-
09-10-2013,08:01 PM
Thanks!! Should have noticed the Format button, d'uh. Maybe this could be a sticky? or not.
Happy Testing!!!X² HD Premium 36" 87 - 125 Ku
10' Unimesh 741 lnbf 97 C
-
09-10-2013,08:07 PM
We may have it, but sticky here for now..
click click b00m