Discuss this Topic here.
Results 1 to 10 of 38
-
X² PREMIUM III - X2_USA_V1.27B4_0905 - Discussion – 09-06-2014,07:44 AM
-
X² PREMIUM III - X2_USA_V1.27B4_0905 new releace – 09-08-2014,02:44 PM
does this x2premium 111 new releace works with iks
-
-
09-09-2014,01:38 PM
Blind scan issue that I have encountered. If you highlight more then one satellite and attempt to blind scan another then anything scanned in are kept in memory of the other satellite. For example, I blind scanned Express AM44 at 11w and then attempted to blind scan 20 and 22w, each time a channel scanned it appeared as being 11w although that wasn't the sat I was scanning. I am now scanning them individually with only one selected, which can be a pia. I noticed that x2 III has storage for 65 sats in total but the list that comes with the file only starts at 45w, I will create my own list.
-
09-09-2014,02:10 PM
click click b00m
-
09-09-2014,02:30 PM
First thing I did was flash the latest file. I have tried repeatedly with the same problem. I also had an issue while scanning Intelsat 25 at 31.5w on c band, ORTM scanned in on the x2 III as a radio channel and 2 attempts at rescanning only for tv channel did not result in opening that channel. I scanned in ORTM as a tv channel on my technomate 5402 without any issues.
-
09-09-2014,02:39 PM
I'm only doing KU at the moment, so I can't try that..I'll let you roll on and see if anything else pops up then we can report it.
click click b00m
-
09-09-2014,02:43 PM
I am setting up a whole new satellite list as I go and am scanning all c band sats for now, I will do ku after.
-
09-09-2014,02:47 PM
Just so you now bro, a channel list backup cannot be done with this file..so you are going to have to do all over when the new files comes out.
You can do a full backup, but the problem is when there is a new file and you use the backup it will load the old software.
I just sent them an email about this and they are working on a channel list backup feature.
This is why we were waiting to fix bugs before selling to the masses.
click click b00m
-
09-09-2014,02:50 PM
I hope that the x2 folks did not take a step back on the blind scan and tuner sensitivity with a different chip as I'm thinking of purchasing the x2III.