Results 1 to 4 of 4
  1. Collapse Details
    Optibox Gekko HD - Enigma 2!
    #1
    Join Date
    Nov 2013
    Posts
    2
    Post Thanks / Like
    Contribute If you enjoy reading the
    content here, click the below
    image to support our site.
    Click Here To Contribute To Our Site
    Hallo

    Gibt es ein HowTo wie man das Enigma2 auf das Gekko HD bringt?

    Danke

    Reply With Quote
     

  2. Collapse Details
    #2
    Join Date
    May 2012
    Posts
    258
    Post Thanks / Like
    Go here : DOWNLOAD SF918SE+ MULTIBOOT IMAGE

    [Only registered and activated users can see links. ]


    unzip : should get two files: 1. root.img 2. uImage

    Get usb stick .... load those two files on usb. Turn box off. Put usb in. Turn box on.....should boot E2. Have to use usb to run E2 on Gekko. When dont want to use E2....turn box off, remove usb, turn box on and it will boot to regular FW.
    Reply With Quote
     

  3. Collapse Details
    #3
    Join Date
    Nov 2013
    Posts
    2
    Post Thanks / Like
    Tthanks @mountaineer

    But unfortunately it does not work.
    Boots only the firmware on the box.

    I do not press any key?
    Reply With Quote
     

  4. Collapse Details
    #4
    Join Date
    May 2012
    Posts
    258
    Post Thanks / Like
    No no key pushing. Box should be off.

    USB stick(FAT 32) with only two files on it. root.img uImage

    Turn on box. SHould say load .26...then boot ... then screen should appear.


    You do have to have the correct bootloader.....
    see here: open .txt file
    [Only registered and activated users can see links. ]

    bootloader is here...must do it first.

    [Only registered and activated users can see links. ]
    Reply With Quote
     

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •