Page 1 of 4 1234 LastLast
Results 1 to 10 of 37
  1. Collapse Details
    Looking Help to set My Switchs and LNB's enigma2
    #1
    Join Date
    Apr 2015
    Posts
    39
    Post Thanks / Like
    Contribute If you enjoy reading the
    content here, click the below
    image to support our site.
    Click Here To Contribute To Our Site
    Hello everybody
    I am New on enigma2 and is completely different to set My switch and LNB's.. I come from Coolsat's and Openbox's devices.

    Using Vu+solo Se Hd (Black hole image). I have downloaded my satellite list

    This is my installation:
    LNB ==>> switch 4x4==>> switch 4x1 ==>> receiver

    What I need to put
    Reception settings
    Configuration Mode: simple/advanced
    Mode: positioner, ABCD, Toneburst A/B, disecq A/B
    Set Voltage & 22 KHZ: yes/no
    Send disecq only on satellite change: yes/no

    What about switch 8x1?
    what about LNB Universal?
    thanks in advance
    Reply With Quote
     

  2. Collapse Details
    #2
    Join Date
    Dec 2010
    Location
    Atlanta, Ga.
    Posts
    8,188
    Post Thanks / Like
    Hello and Welcome to Legit!

    I normally just use the advance lnb settings because every option is available. What are the 4X4 and the 4X1 switches connected to? What kind of lnbs do you have?

    BlackHole is a nice image but it is missing some things that we need in North America. I would suggest you use a different image such as OpenVix to start with if you are in my part of the world.
    .
    .
    .
    Meine Dreambox One ist ein Stück Scheiße!.
    Reply With Quote
     

  3. Collapse Details
    #3
    Join Date
    Apr 2015
    Posts
    39
    Post Thanks / Like
    Quote Originally Posted by el bandido View Post
    Hello and Welcome to Legit!

    I normally just use the advance lnb settings because every option is available. What are the 4X4 and the 4X1 switches connected to? What kind of lnbs do you have?

    BlackHole is a nice image but it is missing some things that we need in North America. I would suggest you use a different image such as OpenVix to start with if you are in my part of the world.
    If you ask me about the brands? I am using chieta 4x1 and channel master 4x4.... Finally my receiver I will put under 8x1(DMC) installation..this is why i am asking about 8x1 also
    I have different static satellites using LNB Ku linear, LNB KU Universal, C Band.. No motorized and C/ku LNBF's thru my installation
    Reply With Quote
     

  4. Collapse Details
    #4
    Join Date
    Dec 2010
    Location
    Atlanta, Ga.
    Posts
    8,188
    Post Thanks / Like
    Where are you located?

    [Only registered and activated users can see links. ]
    Look in post#12 in the above link and download the user manual for Vix. Enigma2 all operates almost the same and that manual gives a good description of how to set things up.

    Information on how your antenna and fta system is set up would be nice, such as how the switches are connected together, and what lnb or other device is connected to each switch port. A diagram or drawing would help, but a good written description will work too.
    Reply With Quote
     

  5. Collapse Details
    #5
    Join Date
    Apr 2015
    Posts
    39
    Post Thanks / Like
    Quote Originally Posted by el bandido View Post
    Where are you located?

    [Only registered and activated users can see links. ]
    Look in post#12 in the above link and download the user manual for Vix. Enigma2 all operates almost the same and that manual gives a good description of how to set things up.

    Information on how your antenna and fta system is set up would be nice, such as how the switches are connected together, and what lnb or other device is connected to each switch port. A diagram or drawing would help, but a good written description will work too.
    Thanks Good Information..
    Understanding what I am reading on This Manual
    *The Manual said:
    Disecq A,B,C,D(for 4/1 switch)
    I guess:
    port 1= A
    port 2= B
    port 3 =C
    port 4 = D
    Is Correct?

    *In regards switch 4x4 (0 / 22 KHZ)
    This is what the Manual said:
    Futhermore You can set the Tuner to use Voltage and 22 KHZ(for polarization Horizontal/Vertical) switching and frequency band High/low): Normally set to "Yes" (default) and to send disecq Only on satellite change: Normally set to "No" (default)

    I guess I need to Set "Yes" If my satellite is 4x4 side ON
    I am Not sure If set "Yes" or "No" If My satellite is 4x4 side OFF
    What you recommend??
    Reply With Quote
     

  6. Collapse Details
    #6
    Join Date
    Dec 2010
    Location
    Atlanta, Ga.
    Posts
    8,188
    Post Thanks / Like
    I think you are correct on the ABCD diseqc switch.

    On the 4X4, which switch do you have? What is the make/model?
    Reply With Quote
     

  7. Collapse Details
    #7
    Join Date
    Apr 2015
    Posts
    39
    Post Thanks / Like
    Quote Originally Posted by el bandido View Post
    I think you are correct on the ABCD diseqc switch.

    On the 4X4, which switch do you have? What is the make/model?
    Through my installation I have 2 different brands of switch 4x4.. Both brands are configurated equal in any FTA receiver (coolsat & Openbox)
    1) Channel master:
    [Only registered and activated users can see links. ]

    2) And Zinwell:
    [Only registered and activated users can see links. ]
    Reply With Quote
     

  8. Collapse Details
    #8
    Join Date
    Dec 2010
    Location
    Atlanta, Ga.
    Posts
    8,188
    Post Thanks / Like
    *In regards switch 4x4 (0 / 22 KHZ)
    This is what the Manual said:
    Futhermore You can set the Tuner to use Voltage and 22 KHZ(for polarization Horizontal/Vertical) switching and frequency band High/low): Normally set to "Yes" (default) and to send disecq Only on satellite change: Normally set to "No" (default)

    I guess I need to Set "Yes" If my satellite is 4x4 side ON
    I am Not sure If set "Yes" or "No" If My satellite is 4x4 side OFF
    What you recommend??
    Set the Tone Mode to On or Off. This is the 22KHz setting for e2. (Band, On, Off are the options.)

    [Only registered and activated users can see links. ]
    Reply With Quote
     

  9. Collapse Details
    #9
    Join Date
    Apr 2015
    Posts
    39
    Post Thanks / Like
    Thanks .. I will try and let you know
    Reply With Quote
     

  10. Collapse Details
    #10
    Join Date
    Apr 2015
    Posts
    39
    Post Thanks / Like
    If I am using LNB KU linear std . How I can set below values? Normally in FTA receivers set 10750
    If I am using LNB universal . How I can set below values? Normally in FTA receivers set 9600 or 10600 or universal
    If I am using LNB C band . How I can set below values? Normally in Fta receivers set 5150
    I am not sure on enigma2 this values

    LoF/L 097500000000000
    LoF/H 106000000000000
    Thresold


    Also I am not sure if is:
    10750000000000000000
    "or"
    00000000000010750

    What means thresold?
    Thanks in advance
    Last edited by bronco; 04-18-2015 at 09:42 AM.
    Reply With Quote
     

Page 1 of 4 1234 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •