Results 1 to 4 of 4
  1. Collapse Details
    X2 premium mini - Problem adding channels - need help
    #1
    Join Date
    Jun 2013
    Posts
    11
    Post Thanks / Like
    Contribute If you enjoy reading the
    content here, click the below
    image to support our site.
    Click Here To Contribute To Our Site
    I am missing some instruction.... I can scan in channels, but I am not getting them in the channel listing. For example; I can scan G19- 3940 H 30000 and get 7 channels to list and save. If I repeat the scan, still 7 and it says no new channels found. However, in the channel list, there are only 5 from this transponder.
    What do I have to do to get channels into the list for setting favorites or editing, etc... ???
    Migold -
    10' Mesh BUD Dual C-LBNF (61W-139W) with (1) Dual LNBF for 97°W & (2) Dual LNBF for 101°W; 90 cm GeoSatPro w/ DG380 (61W-125W) & 2.4 meter stationary (aimed to) with (1) Dual C-LBNF for 99°W & (2) Dual LNBF for 105°W. 4X4 switches w/ DiSEqC switches to AZBOX Premium Plus HD; AZBOX miniMe; X2 mini Premium HD, & X2 DVB-S2 M1 HD. OTA-VHF Hi-Band Yagi+Amp; HDTV Antenna w/Internal Booster from 'antennashopusa' on ebay.
    Reply With Quote
     

  2. Collapse Details
    #2
    Join Date
    Dec 2010
    Location
    Atlanta, Ga.
    Posts
    8,191
    Post Thanks / Like
    What two channels are missing?
    .
    .
    .
    Meine Dreambox One ist ein Stück Scheiße!.
    Reply With Quote
     

  3. Collapse Details
    #3
    Join Date
    May 2011
    Posts
    5,807
    Post Thanks / Like
    Delete the TP and re-run a blindscan
    X2 Premium III HD, Openbox X5/ S10, Gsky V3/V6, iSmart m100
    Reply With Quote
     

  4. Thanks el bandido thanked for this post
  5. Collapse Details
    #4
    Join Date
    Jun 2013
    Posts
    11
    Post Thanks / Like
    OK, I solved my problem. Two channels were missing from the favorites, Justice and Bounce. I have them added back by following this process:
    1. Press "SAT"
    2. Select satellite from the list - in this case G19.
    3. Press "OK"
    4. Press "MENU"
    5. Select "Channels" from the icons on screen.
    6. Select "Set Favorites"
    7. Choose the Favorites list from the choices.
    8. From the listing of channels, select or deselect channels for your favorites list using the "OK" button.
    9. When your choices are complete, Press "EXIT" to finish, and "YES" for saving.
    Now you have the channels that you want in your favorites list, which comes up when you press "OK".
    After following this process, I have added the missing channels back into my favorites list.

    All the channels were already found by scanning, no problem there, just would not show in the favorites list when pressing "OK". It was not obvious to me that I was getting only a favorites listing when pressing "OK". Then the process of establishing the favorites list was not obvious to me. I am getting a little smarter in my old age, it just takes more time....
    Migold -
    10' Mesh BUD Dual C-LBNF (61W-139W) with (1) Dual LNBF for 97°W & (2) Dual LNBF for 101°W; 90 cm GeoSatPro w/ DG380 (61W-125W) & 2.4 meter stationary (aimed to) with (1) Dual C-LBNF for 99°W & (2) Dual LNBF for 105°W. 4X4 switches w/ DiSEqC switches to AZBOX Premium Plus HD; AZBOX miniMe; X2 mini Premium HD, & X2 DVB-S2 M1 HD. OTA-VHF Hi-Band Yagi+Amp; HDTV Antenna w/Internal Booster from 'antennashopusa' on ebay.
    Reply With Quote
     

  6. Thanks el bandido thanked for this post

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •