Thanks, I have it all recovered now!
Thread: Stuck on Boot Image!
Results 11 to 20 of 33
-
04-18-2019,09:11 PMMy name is Mike.
My posting name at Satguys is Primestar31
-
Post Thanks / Like - 1 Thanks, 2 Likes, 0 Kiss My AssViP3R thanked for this postel bandido, Megatron817 liked this post
-
04-19-2019,05:25 AM
EB, gave me the info p3 is slot1. athoik gave the mount info. Just rewrote it so you could understand how.
I learned someting new myself. Thanks!
-
Post Thanks / Like - 3 Thanks, 0 Likes, 0 Kiss My Ass
-
04-19-2019,06:15 AM
I learned a few things myself with this:
1: ALWAYS have another good image in another slot.
2: Be VERY careful mucking around in the Mio's file structure through Network Neighborhood, especially if you have a touchy laptop trackpad.
3: MENU button on the RCU can recover from an apparent corrupted image. Just press it multiple times while re-powering the Mio from the adapter.
4: ALWAYS have a reasonably current image backup, and KEEP TRACK of which thumbdrive has the backup image you need!
#3 alone could have got me up and running in a few minutes, versus hours of trying everything else.My name is Mike.
My posting name at Satguys is Primestar31
-
Post Thanks / Like - 4 Thanks, 1 Likes, 0 Kiss My Assrayydio liked this post
-
06-19-2021,05:50 AM
My OS Mio 4K is stuck in boot. I have tried to reinstall the most current image from a hard shutdown and it still get stuck in boot mode.
Used the advice above about repeatedly hitting the menu button to get to the slot selection blue screen. Doesn't matter which slot I choose it remains in boot "lockup".
Any advice to get me going would be appreciated.
-
Post Thanks / Like - 2 Thanks, 0 Likes, 0 Kiss My Assel bandido, Megatron817 thanked for this post
-
-
Post Thanks / Like - 2 Thanks, 0 Likes, 0 Kiss My Assel bandido, Megatron817 thanked for this post
-
06-19-2021,09:22 AM
Did you get the usb image to flash or is the mio going straight to boot stuck?
-
06-19-2021,11:44 AM
Let me explain further.....
I am using a Edision OS Mio 4k (Not the "+" model). This is one of the 4 Mios I have so I am reasonably accustomed to the workings therein.
When I plug the unit into 12VDC for a hard boot, it will recognize the usb dive with the TNAP files and go through the flash installation. After completion of the flash install, the Edison logo appears on the TV screen for an extended period of time. Eventually the TV display goes blank (black screen). The unit still shows boot in the STB display window but there is no other evidence of the boot completing.
I never get to the North Amercian Boot Screen. I cannot access any of the menus because the machine never comletes the boot process.
-
06-19-2021,11:47 AMMy name is Mike.
My posting name at Satguys is Primestar31
-
06-19-2021,11:48 AM
The image flashes fine. I get the progress screen for the flash install. Then goes to boot and stays there.
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Kiss My Assel bandido thanked for this post
-
06-19-2021,11:51 AM
Try to access it through the WebIF screen. Seriously, you need to try things and post results, not just tell us "it doesn't work". IF you've already tried that in the WebIF, you haven't told us you have and what happened. Have you ever even used the WebIF screen? All you do is bring up a web browser, and type in the IP address of the MIO on your lan.
My name is Mike.
My posting name at Satguys is Primestar31