To use dvbsnoop with OSMIO, or other single tuner DVB S2 enigma2 receiver with OpenPli based image:
(1) Start a telnet session with the box.
(2) Install dvbsnoop. Enter this command in telnet: opkg install dvbsnoop
(3) Tune the box to a DVB-S transponder you wish to scan. (Transponder must have signal.)
(4) Enter this command in telnet to start pidscan: dvbsnoop -s pidscan
See post #9 for an example.
Results 1 to 10 of 15
Threaded View
-
06-09-2019,09:36 AM
-
Post Thanks / Like - 3 Thanks, 1 Likes, 0 Kiss My Asscomfortably_numb liked this post