I downloaded and installed the image in this link, which is the exact same image that should be shipped with a Titanium MIO:
[Only registered and activated users can see links. ]
Hauppuage 950Q and 955 were inserted into the MIO before the image was installed. The results are easy to see.
[Only registered and activated users can see links. ]
Sometimes when there is a hardware problem or hardware failure, people will mess with the software thinking that is the problem. Then when the hardware problem is solved, the firmware is messed up. This action or sequence of events is pretty common.
Nothing is wrong with TNAP. The supported Hauppauge devices have been checked and are found to be working
Results 21 to 28 of 28
-
12-18-2019,08:16 PM
Last edited by el bandido; 12-18-2019 at 08:22 PM.
-
Post Thanks / Like - 3 Thanks, 1 Likes, 0 Kiss My Ass
-
12-19-2019,12:55 PM
Confirming that this is the TNAP image default on the OS Mio 4k STBs shipped from Titanium Satellite.
-
Post Thanks / Like - 2 Thanks, 0 Likes, 0 Kiss My AssMikeB, el bandido thanked for this post
-
12-19-2019,07:34 PM
I reflashed the TNAP image and now it works with the 955q.
Microwave techs are fully deviated.
-
Post Thanks / Like - 1 Thanks, 2 Likes, 0 Kiss My Assel bandido thanked for this postel bandido, MikeB liked this post
-
01-16-2020,10:00 PM
I can't get OpenPli 7.2 to display the Hauppauge 950Q on the available Turners window. I have all the drivers installed. It works fine with TNAP1 and OpenVIX latest image.
AZBox Me, Edision OS Mio 4K, Octagon SF8008, and TBS 6903-X. DG-380 Motor on 1.2M Geosat Pro. 3ABN Dish @30.0°W. 2nd 1.2M looking @103.0°W KU-Band. 12FT Paraclipse Dish looking from 37.5°W to 111.1°W.
-
01-16-2020,10:52 PM
What kernel version for PLI, or what is the image build date? Look in Menu--->About.
Thanks.
-
01-16-2020,11:39 PM
It looks like PLI is still on kernel 5.3, which means the 850 and 950Q are not supported. I have already written about this in another thread.
[Only registered and activated users can see links. ]
It should also be noted that ATSC support for the Hauppauge 850 and 950Q usb devices stopped for a brief period of time, probably only in images with a kernel of 5.2 and 5.3 due to driver issues. Support for the Hauppauge 850 and 950Q usb devices was restored in images for the MIO line of receivers using kernel 5.4.0 and 5.4.1. Most of the current images are using kernel 5.4.1, which supports all three ATSC devices.
[Only registered and activated users can see links. ]
A lot of what is posted for the MIO receivers would apply to other enigma2 receivers.
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Kiss My AssBabadem thanked for this post
-
01-17-2020,07:45 AM
The openpli-7.2 release was bad timing with kernel 5.4.1 by about a week or so.
Seems Openpli team does not change the kernel during the current release like satdreamgr and the OE images do so the next release of Openpli should be kernel 5.4.1 or newer whenever that happens.
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Kiss My Assel bandido thanked for this post
-
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Kiss My Assel bandido thanked for this post