Results 1 to 5 of 5
  1. Collapse Details
    TNAP-3 Test Images for OSMIO4K
    #1
    Join Date
    Dec 2010
    Location
    Atlanta, Ga.
    Posts
    8,188
    Post Thanks / Like
    Contribute If you enjoy reading the
    content here, click the below
    image to support our site.
    Click Here To Contribute To Our Site
    Attached are New, TNAP-3 multiboot and flash images for the Edision OSMio4k.
    Please test and report any problems or issues.
    Factory Default does not work and should not be used in this image.
    There may be other issues that are unknown to me, which is why they are presented for testing.

    Both flash and multioot images have been tested to a complete boot and a complete setup. These images should load and run without issue.

    Load these images and any other file on this site at your own risk!

    Report any problems, issues, or comments in the discussion thread. EB


    [Only registered and activated users can see links. ]

    [Only registered and activated users can see links. ]

    [Only registered and activated users can see links. ]

    [Only registered and activated users can see links. ]















    These images are not designed for the OSMiok+ or OSMio4kplus.

    You can discuss this Thread >>HERE<<.
    Last edited by el bandido; 03-04-2020 at 02:11 PM. Reason: Delete Files
     

  2. Collapse Details
    #2
    Join Date
    Dec 2010
    Location
    Atlanta, Ga.
    Posts
    8,188
    Post Thanks / Like
    Test images in post#1 of this thread have been updated.
    These new images will show improvements in the feeds, installed plugins, and an over-all cleanup. ATSC Hauppauge 850, 950, and 955 drivers are installed at default.
     

  3. Thanks stephan94, Megatron817, ViP3R, mc6809e, Titanium thanked for this post
  4. Collapse Details
    #3
    Join Date
    Dec 2010
    Location
    Atlanta, Ga.
    Posts
    8,188
    Post Thanks / Like
    Test images in post#1 of this thread have been updated.

    These are real close to the finished product.

    NOW is the time to suggest changes or any other ideas.
     

  5. Likes norman881 liked this post
  6. Collapse Details
    #4
    Join Date
    Dec 2010
    Location
    Atlanta, Ga.
    Posts
    8,188
    Post Thanks / Like
    Post #1 has been updated toTNAP-3-test-D
    These images have a few more skins and plugins in the feeds.

    Videomode is locked at 60Hz,
    To unlock Videomode for 50Hz use, go to plugins and remove the Videomode plugin. Immediately Reinstall Videomode plugin from feeds, the reboot box.
     

  7. Thanks mc6809e, Megatron817, ViP3R, MikeB, Titanium thanked for this post
  8. Collapse Details
    #5
    Join Date
    Dec 2010
    Location
    Atlanta, Ga.
    Posts
    8,188
    Post Thanks / Like
    TNAP-3 image testing has ended.
    Please destroy or delete any test versions on TNAP-3 from your computer and storage devices.
    Please delete any TNAP-3 image that you have loaded in the receiver and do a fresh install of TNAP-3 once a final or non-test version is released. The test version and the release version of TNAP-3 are a bit different in the file structure, and this is why test versions of TNAP-3 should be destroyed.

    Thanks to everyone that participated!
    .
    .
    .
    Meine Dreambox One ist ein Stück Scheiße!.
     

  9. Thanks norman881, Megatron817, stephan94, Titanium, MikeB, mc6809e thanked for this post

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •