The Robocop skin does not provide much information in the About page.
The timezone should not change on its own. You may check your settings file located in /etc/enigma2 of the receiver files. Make sure you do not have multiple timezone entries in this file. An example of what to look for is shown below.
[Only registered and activated users can see links. ]
Results 161 to 170 of 180
-
05-06-2020,06:33 PM
-
05-06-2020,09:07 PM
This is the only timezone configuration:
osmio4k-office:~$ cat /etc/enigma2/settings | grep timezone
config.timezone.val=Denver
Strange issue. I have noticed that the time is completely wrong at times even though I'm using NTP and after awhile the correct time shows up.Microwave techs are fully deviated.
-
-
05-07-2020,09:42 AM
Here's a screenshot. Notice that the date is totally wrong and the time, not even the minutes, is close. It's 0939 when the screenshot was done. As I was composing this, the date and time got set correctly. This is a recurring issue. I guess I can reflash the image and start over.
[Only registered and activated users can see links. ]Microwave techs are fully deviated.
-
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Kiss My Assel bandido thanked for this post
-
05-07-2020,10:49 AM
Why would reflashing the image fix this????
First, you may sync the time every 5 minutes if you wish, and sometimes I do that. But Why? Setting the sync for 1 hour or 24 hours will work fine.
Second, If you are using a wifi connection, then set a delay for it. Yours is set to 0. 15 Seconds for the delay usually works well on my wifi.
Finally, If you are having trouble with the time, then use transponder time instead. This feature works well, but you will need to set a channel that has the correct time so the receiver will boot to that channel. The OpenPLi wiki has information on how to do this.
-
05-07-2020,06:08 PM
OK. I won't ask anymore. This should've been a simple setting and it isn't. By the way, I'm using ethernet but I do have the option for wifi. If I go to wifi then I'll change it. I'll just live with it. Bye.
Microwave techs are fully deviated.
-
05-07-2020,07:05 PM
Here you are using wifi: [Only registered and activated users can see links. ]
So how in the hell am I supposed to know you are no longer using wifi? The mind reading app has been disabled on this site.
Put simply, the time reverts back to default when there is a query for time and no time is available. That is why you ended up with a time and date that made no sense.
-
Post Thanks / Like - 1 Thanks, 3 Likes, 0 Kiss My Ass
-
05-17-2020,02:14 PM
The feeds have been updated for TNAP 3.2 images.
The aeonfhdmod skin has been updated to version 2.26.
The YouTube plugin had stopped working, and this was not the fault of the enigma2 images.
Other plugins have been updated.
Some system files have been updated.
The maximum number of updates you should see should be around 35. This number may vary, depending on what has been loaded into the receiver, and when the receiver was last updated.
[Only registered and activated users can see links. ]
It is Always a Good Idea to backup the full image before updating the receiver.
-
Post Thanks / Like - 5 Thanks, 0 Likes, 0 Kiss My Ass
-
05-17-2020,02:29 PM
Off-topic
Lol @ the circle on the player's head... Just the spot at the right time!
Στάλθηκε από το Redmi Note 5 μου χρησιμοποιώντας Tapatalk
-
Post Thanks / Like - 0 Thanks, 3 Likes, 0 Kiss My Ass