Page 18 of 18 FirstFirst ... 8131415161718
Results 171 to 180 of 180
  1. Collapse Details
    Join Date
    Apr 2013
    Posts
    32
    Post Thanks / Like
    Contribute If you enjoy reading the
    content here, click the below
    image to support our site.
    Click Here To Contribute To Our Site
    I'm getting ready to install TNAP 3.2 on my Edision 4K, I'm currently running 3.0 which came installed on the receiver. I've never installed a new image yet and I don't want to make any mistakes if I can keep from it. I downloaded the "tnap-3.2-osmio4k_multiboot_ofgwrite.zip" file to my desktop and then placed it into an empty file which I named "downloaded_images". Then I placed it on my empty USB stick. After that I transferred the USB drive to my Edision. I then was able to navigate through the menus and found the file.

    [Only registered and activated users can see links. ]

    Does this look correct so far? I wan't to flash it to slot 2. I assume I will be asked to choose a slot after I click flash image, is that correct?

    Thanks in advance.
    Edision OS Mio 4K, Invel DVB 3612, 12ft Conifer Mesh Bud, DMX 741 LNBF, V-Box 7 Positioner, Thomson Saginaw Actuator, Primestar fixed at AMC21, Channel Master CM-7000.
    Reply With Quote
     

  2. Thanks el bandido thanked for this post
  3. Collapse Details
    Join Date
    Jul 2017
    Location
    Bavaria , Germany
    Posts
    198
    Post Thanks / Like
    Hello ,
    This is a question about TNAP3.2.
    On a USB key I have all the picks concerning the programs of the different satellites.
    After a Blindscan there is no problem with OpenATV and TNAP 3.0 and Openvision the picons agree
    with the different programs,
    although the reference number is simplified on OATV and Openvision as on the picon itself and not simplified on TNAP3
    On the other hand on TNAP3.2 the spikes are not matched for the programs.

    Why this difference?
    this problem does not occur on all satellites.
    I cannot find a logic to this problem.
    Attached Images Attached Images
    Edision OS mio4K with TNAP-5 ; Channel Master 1,80 ; TBS6983
    LNB Ku Band . LNB KA Band 18200-19200 /21200-22200,LNB C band
    Reply With Quote
     

  4. Thanks el bandido, ViP3R thanked for this post
  5. Collapse Details
    Join Date
    Jul 2017
    Location
    Bavaria , Germany
    Posts
    198
    Post Thanks / Like
    Hello ,
    No one has an explanation for these different behaviors?
    Why TNAP3 has a problem with picons, and this only after the blindscan,
    if with Dreamset help I load a list of frequencies and programs in the editor everything is fine,
    after a blindscan it does not manage to match the picons and the programs ???
    Edision OS mio4K with TNAP-5 ; Channel Master 1,80 ; TBS6983
    LNB Ku Band . LNB KA Band 18200-19200 /21200-22200,LNB C band
    Reply With Quote
     

  6. Thanks Megatron817 thanked for this post
  7. Collapse Details
    Join Date
    Mar 2018
    Location
    West Central Florida
    Posts
    618
    Post Thanks / Like
    Only thing I can think of is a setting "ignore DVB-S namespace sub network". In the Customize menu on Tnap. See if they are set the same.
    Reply With Quote
     

  8. Thanks stephan94, ViP3R thanked for this post
  9. Collapse Details
    Join Date
    Dec 2010
    Location
    Atlanta, Ga.
    Posts
    8,188
    Post Thanks / Like
    What happens if you reboot the box after a blindscan?
    Reply With Quote
     

  10. Thanks ViP3R thanked for this post
  11. Collapse Details
    Join Date
    Jul 2017
    Location
    Bavaria , Germany
    Posts
    198
    Post Thanks / Like
    Hello El bandido,
    Nothing is happening, no picon is displayed.

    I really don't understand the problem.
    Obviously on all images the OSD is set in the same way.

    It is not dramatic, but it is incomprehensible and a little embarrassing.
    Edision OS mio4K with TNAP-5 ; Channel Master 1,80 ; TBS6983
    LNB Ku Band . LNB KA Band 18200-19200 /21200-22200,LNB C band
    Reply With Quote
     

  12. Thanks el bandido, ViP3R, Megatron817 thanked for this post
  13. Collapse Details
    Join Date
    Mar 2018
    Location
    West Central Florida
    Posts
    618
    Post Thanks / Like
    Took a second look at your pictures. Why Tnap3 and 3.2 have the same service ref. and why tnap3 shows the picon is the mystery. Tnap3.2 seems be normal.
    In the service ref. at the end is 1A4AFE9 the AFE9 would be the sub network so it appears Openatv and open vision is set to ignore DVB-S namespace sub network "Yes" because sub network is 0000 and both your Tnap image are set to ignore DVB-S namespace sub network "No".
    Reply With Quote
     

  14. Thanks el bandido thanked for this post
    Likes el bandido liked this post
  15. Collapse Details
    Join Date
    Jul 2017
    Location
    Bavaria , Germany
    Posts
    198
    Post Thanks / Like
    Quote Originally Posted by Megatron817 View Post
    Took a second look at your pictures. Why Tnap3 and 3.2 have the same service ref. and why tnap3 shows the picon is the mystery. Tnap3.2 seems be normal.
    In the service ref. at the end is 1A4AFE9 the AFE9 would be the sub network so it appears Openatv and open vision is set to ignore DVB-S namespace sub network "Yes" because sub network is 0000 and both your Tnap image are set to ignore DVB-S namespace sub network "No".
    Hello Megatron817
    I noticed that the "service ref" is more complete on one and less on the other.
    I cannot find in the menu or I can change that TNAP3.2 ignores DVB-S namespace sub network, like the other images.
    If you could tell me where I can do it, it would be great

    PS:
    I finally found where I can change the menu.
    it works perfectly after the change
    Thank you very much for this help.
    The problem is finally solved.
    Attached Images Attached Images
    Edision OS mio4K with TNAP-5 ; Channel Master 1,80 ; TBS6983
    LNB Ku Band . LNB KA Band 18200-19200 /21200-22200,LNB C band
    Reply With Quote
     

  16. Thanks el bandido thanked for this post
    Likes Megatron817, el bandido liked this post
  17. Collapse Details
    Join Date
    Dec 2010
    Location
    Atlanta, Ga.
    Posts
    8,188
    Post Thanks / Like
    Kernel has been updated to 5.8.
    Also a recent DVB driver update.
    Currently there is a problem in the image upgrades with the Hauppauge atsc drivers that cause boot failure.

    We will see about updating TNAP soon.

    [Only registered and activated users can see links. ]
    Reply With Quote
     

  18. Thanks ViP3R, Titanium, eastof111, Megatron817, stephan94, mc6809e thanked for this post
  19. Collapse Details
    Join Date
    Jul 2017
    Location
    Bavaria , Germany
    Posts
    198
    Post Thanks / Like
    Hello,
    Finally a little movement on the side of Edision.

    Can't wait to see the new features (let's hope for progress) brought by this new kernel and DVB Driver.
    Edision OS mio4K with TNAP-5 ; Channel Master 1,80 ; TBS6983
    LNB Ku Band . LNB KA Band 18200-19200 /21200-22200,LNB C band
    Reply With Quote
     

  20. Thanks ViP3R, el bandido thanked for this post
Page 18 of 18 FirstFirst ... 8131415161718

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •