excuse me
but I don't quite understand what you mean.
Where is my mistake?
what should I do to fix it?
Results 61 to 70 of 70
-
08-11-2021,12:57 PMEdision OS mio4K and Ustym 4K Pro with TNAP-5.1 ; Channel Master 1,80 ; TBS6983
LNB Ku Band . LNB KA Band 18200-19200 /21200-22200,LNB C band
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Kiss My Assel bandido liked this post
-
08-11-2021,01:00 PM
The T2MI plugins have been updated and sent to the 4.0 server. Do a Software update (Menu--->Setup--->Software update), then uninstall and reinstall the T2MI plugin. Doing this should fix the About page.
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Kiss My Assstephan94 thanked for this post
-
08-12-2021,12:01 AM
Hello ,
Thanks for the explanation .
Unfortunately despite a new update the problem is still there, still this green screen.
(not a big deal if the only problem is not being able to call the info)
luckily version 4.1 is there and works perfectly.Edision OS mio4K and Ustym 4K Pro with TNAP-5.1 ; Channel Master 1,80 ; TBS6983
LNB Ku Band . LNB KA Band 18200-19200 /21200-22200,LNB C band
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Kiss My Assel bandido thanked for this post
-
10-23-2022,07:48 AM
Hello
I still have on my MIO4K ( multiboot) the version 4.0 of TNAP ( as reference)
I wanted to reinstall the Plugin extra T2MI module .
it is not possible anymore
here is what I get as an answer .
Is it a mistake ? is it possible to have it again ?Edision OS mio4K and Ustym 4K Pro with TNAP-5.1 ; Channel Master 1,80 ; TBS6983
LNB Ku Band . LNB KA Band 18200-19200 /21200-22200,LNB C band
-
10-23-2022,08:08 AM
The TNAP4.0 feeds have been removed as there are later versions. The plugins you want are attached and can be installed manually.
.
.
.
Meine Dreambox One ist ein Stück Scheiße!.
-
Post Thanks / Like - 2 Thanks, 1 Likes, 0 Kiss My Ass
-
12-18-2022,02:16 PM
Hi guys. I have a few questions in general.
First. Is it me being a hardhead?
How many flash TNAP and go through the initial setup and are up and running fluidly in a very short time?
I'm being nice here. So if you could. Please do the same.
What's the sense? The thinking that goes into mapping remote buttons to migrate from using a regular, everyday tv remote to a whole world of conflusteration?
I mean. Even hitting the help button to show me the out-of-box keymapping for a quick start is kinda' not there.
Now mind you I've been an openatv user for a long time. No reason. It's just what came in the first receiver I used. A Zgemma H7.AC.
For months I've been using openvix. Why? some guy was whining that opentv didn't have serviced on a transponder displayed in Signal Finder. Remember that one EB?
Once I tried it. It's pretty cool.
Now i can plant discovered tp's in the satellites.xml. Restart the GUI. And peek at what is in the existing and newly entered tp's and decide if it's worth even cluttering as scan or waiting for a long time to find out that they are all encrypted. Right?
Openatv lacks that. TNAP has it.
Well. I had an issue in vix recently where watching a particular channel in 4:3 format. Heading over the the Video rc button took me to the media folder on my hdd.
A duplicate of what a normal person would think should be the Media button. Which some brain trust duped.
Setup>Video setting were glitchy. And limited.
Anyway once a dude over at satelliteguys saw the same thing. He assisted in getting the Video button to do what it....should!....cycle between letterbox, panscan, scale.
Verbiage in atv is a bit different. But the same things happen.
Not vix. The 4:3 format video had what you would expect. Black bordering.
It gets deeper. The vix forum addressing the issue got denials, my tv is not setup right, its me, all sorts of crap.
Brits. Arrogant. Thank God for Lucas Electrics.
Anyway. Once I got the format button to function. Them 4:3 video would go letterbox, full screen. For a few seconds. It constantly toggled back to 4:3. Back and forth. And forth and back.
Openatv? Nope. Letterbox and full screen works. And "sticks". It's only a few channels that do this.
So off to TNAP world. Oh my god. It was flashed in a slot. Upgraded. And my previous channel list flashed in it along with my custom satellite.xml.
The good thing? That channel displayed perfectly in any selection I chose. And it stuck like that. Just like openatv.
*Ding* A strike against the vix team.
Seat belts fastened.
1) How in the heck do I change channels in a semi intelligent, the 4 way up/down?
Don't tell me that everyone using TNAP fires it up and don't end up in a ball of confusion until they learn after a few hours or days how to navigate the simple things.
I want to change a channel. How about going to the epg and simply scrolling up/down the listings and....what is the cockamamy term?...."zapping" on a channel to watch it.
Or just pressing a button that opens the channel list on a boo-kay and letting me scroll it, hitting the OK button and watch it. Or Hitting it once to see a channel preview befoe..."zapping" it.
2) I put my new updated and ordered channels into TNAP. In an order so I can watch Star Trek lets say and it's at the bottom of the list on 101W.
NOW I remember the last time I fired up TNAP. All of the channels are in alphabetical order. Why? I scheduled root canal because it sent me into oblivion.
Why do this? Whats the reasoning? If a person writes in a channel list with your favorite channel editor. Why does the image alphabetize it out-of-box.
I still didnt find the setting (if there is one) to make it like atv and <choking> vix does without any settings, tweaks at all.
I don't get it.Pick up 50 TV remotes. Sony, Sanyo, Samsung. A green one, a blue one, the colors you choose.
Channel up, channel down, Display (video) shows display settings, Media shows what you may have on a USB or HDD.
Dishnet, Direc, your cable company cable box. There is some normalcy there.
Heaven forbid if you borrowed your friends car to discover after the fact that the brakes are on the radio volume control.
<Sigh. Taking a deep breath here.
Dudes. How do I get a channel list and scroll through it. And change to watch it? Easily.
What are the steps do do the most simple and straight forward things?
And that channle list (once the novocaine wears off) in MY order and not A-Z.
.....but at least she displays 4:3 in whatever or however I decide to watch it in. And it stays there like it should. TNAP? "Tylenol 'n a percocet"?
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Kiss My AssMegatron817 thanked for this post
-
12-18-2022,07:21 PM
Someone has taken the time to customize Openatv and you are use to that. Openpli comes basic leaving it up to you to customize. Tnap has been somewhat customized but still you can do more customizing if you want to or use it as is. The EPG can be changed by opening the EPG and press the menu button for the settings. The only thing I see in alphabetical order is the satellite lists. My bouquets are sorted the way I built them. In channel selection screen the green button brings up the satellite lists and the blue button brings up the bouquets. As far as i know OpenATV works the same way. If you look at the Edision remote OpenATV has used the page + and - to change the channel but really the up and down arrows are for chaning the channels on the Edision remote.
-
Post Thanks / Like - 3 Thanks, 0 Likes, 0 Kiss My Ass
-
12-19-2022,12:06 PM
Using 841 words to tell us you don't like the way the image changes channels is a bit much. I have about 40 different fta satellite receivers of various makes/models that I have used at least once in the past twenty years and they all change the channels basically the same way. So maybe understand how they work and you will be happier??? Otherwise, use OpenATV and enjoy life!
Almost all fta satellite receivers have a key to press to bring up the satellite list. In TNAP images, this is the green button.
After pressing the green remote button, select a satellite and press the OK button. This gives channels for the satellite. (And again, a standard practice in fta satellite receivers.) Now scroll through the channels for the satellite and press OK on the channel you want. Simple enough.
TNAP images are preset to use Neutrino style channel selection. In the middle of the remote is an OK button. Directly above the OK button is an arrow up, and directly below the OK button is an arrow down. Use these two arrows for single channel changes.
You may also change channels through the epg list which is usually empty, (For those that want to zap through an empty epg list for whatever reason. )
Use the Hotkey menu to change remote key Function(s). Don't like the way the keys are mapped? Re-map them.
A bouquets list should stay in the order that you assign it. You can expect any other channels lists besides Bouquets or epg to be in alphabetical order.
Using channel editors can cause corruption or errors. You should be able to go into Antenna setup and scroll all the way to the end of the satellite list in Both directions without any hangups. Something is wrong if you cannot do this, and the satellites.xml file should be immediately fixed for proper operation.
You are welcome to attach any Bouquet that does not work correctly. But you will also need to attach at least the satellites.xml file and the lamedb file that were in use when the offending Bouquet file(s) were made. Corruption or errors probably exist if the Bouquet file is not shown in the assigned, non-alphabetical order.
If you don't like the Neutrino channel style then disable it in User interface menu. There are other channel change features that can be enabled using this menu.
[Only registered and activated users can see links. ]
-
Post Thanks / Like - 0 Thanks, 3 Likes, 0 Kiss My Ass
-
-
12-19-2022,07:41 PM
That is not what I said...
FTA Satellite receivers are not televisions. FTA Satelllite Receivers are also not sold at any of the stores you mention unless something has changed recently. I simply told you how in general fta satellite receivers are setup and have been setup for at least a couple of decades. I have a decent collection of various fta receivers to base it on.
What you describe is not a common glitch. It is a sign of a corrupted file or a file that contains errors. Improper use of a channel editor or improper file editing can cause this. There is a video in the link below that shows proper operation without errors. No reboots, resets or restarts needed.
[Only registered and activated users can see links. ].
.
.
Meine Dreambox One ist ein Stück Scheiße!.
-
Post Thanks / Like - 1 Thanks, 2 Likes, 0 Kiss My Ass