TNAP-4.1-Test Images for Edision MIO/MIO+

[cyberham]

I downloaded from online and installed the August 13 TNAP 4.1 image. All images loaded prior to this did not solve my clock issue when I switched my Mio+ to standby. My Mio+ clock has always been accurate if I left the receiver powered. However, this latest release may be the magic bullet. So far, the clock is remaining correct even in standby. I will continue leaving the receiver in standby whenever I am not using it to test if it remains accurate.

Added: This morning I installed the new August 15 image. Continuing to monitor.

[stephan94]

Hello
I updated today to 4.1.
Unfortunately the problem of the satellite list which does not work in German language is still there

Have a good day

Stephan94

[el bandido]

There never was a time problem when the receiver was in standby --as long as the last channel had the correct time!
Enigma2 receivers and fta receivers in general are set to grab the time from the transponder. The reason for this is simple: Most other parts of the world besides North America send the correct time on all transponders that can be seen by a fta receiver. North America does not do that.

The SystemTime plugin worked well, but was misunderstood by some users. This led to other time problems.
TNAP is based on OpenPLi. OpenPLi made the SystemTime plugin obsolete months ago, but the SystemTime plugin was retained in TNAP. This caused other time issues because two partial sets of time keeping files ended up in TNAP 4.0. So it depends on how you were running your fta system as to whether you had a time problem or not.

There should be no more time issues in TNAP, providing you have set the receiver to a transponder with the correct time If using Transponder time, Or if you have a decent and correctly set Internet connection if using NTP time. If you need to sync the time for some unknown reason, then reboot the box. Otherwise, set the receiver up correctly for the time and forget about it...

[el bandido]

Hello
I updated today to 4.1.
Unfortunately the problem of the satellite list which does not work in German language is still there

Have a good day

Stephan94

In your About screencap, 2021-08-07 Is your enigma version. Online updates were not set correctly before, but are today. Either install the image (Flash image), or try another online update.

[Only registered and activated users can see links. ]

[Only registered and activated users can see links. ]

[Only registered and activated users can see links. ]

KA Blindscan to be added!

[el bandido]

Crash log

Also did a factory reset. Did not crash anymore but my favorites list did not get erased after the factory reset like they should have been.

Try an online update. It should work now. If online update does not show 8-15 fro enigma2 in the About menu, then flash the 8-15 image.

720p 60 Hz boot should be fixed.
Factory reset needs work...
Thanks!

[Megatron817]

Try an online update. It should work now. If online update does not show 8-15 fro enigma2 in the About menu, then flash the 8-15 image.

720p 60 Hz boot should be fixed.
Factory reset needs work...
Thanks!

8-15 no issue here.
I see an option missing even on the earlier versions of 4.1
There is no option to remove satellite or Terrestrial services in the channel context menu.

[stephan94]

In your About screencap, 2021-08-07 Is your enigma version. Online updates were not set correctly before, but are today. Either install the image (Flash image),
KA Blindscan to be added!

Thanks it works well,
I have done the flashimage method successfully.

Ka blindscan, I can't find where it is?
I can't find the inversion when the LOF is above the search area.
KA-SAT search does not match KA LNBs

[el bandido]

KA Blindscan to be added later! . Not available or Not working today....

[el bandido]

8-15 no issue here.
I see an option missing even on the earlier versions of 4.1
There is no option to remove satellite or Terrestrial services in the channel context menu.

"Remove selected satellite" should be available after an online update.

[Megatron817]

"Remove selected satellite" should be available after an online update.

Yes, now available after online update. Thanks