TNAP-4.1 Image -20210906 - Discussion

[el bandido]

Discuss the TNAP 4.1 image here.
Link to MIo+ image files :[Only registered and activated users can see links. ]
Link to Mio image files: [Only registered and activated users can see links. ]

[MikeB]

Just confirming, this is the first TNAP 4.1 full Release candidate image?

[el bandido]

TNAP 4.1 full Release candidate image Non- test image --or whatever else you want to call it.

[MikeB]

Ok, just flashed the 4.1 multiboot image into Slot 2. Where is the menu setting to set it for NTP time, I can't seem to find it? Here's all I show in Menu > Setup > System > Customize:

[Only registered and activated users can see links. ]

Here's my Settings file:

[Only registered and activated users can see links. ]

[el bandido]

Your settings file should run OK.
To set btp:
Menu--->Setup--->System--->Customize

[Only registered and activated users can see links. ]

[MikeB]

Your settings file should run OK.
To set btp:
Menu--->Setup--->System--->Customize

[Only registered and activated users can see links. ]

That's just it, none of those options show in Menu--->Setup--->System--->Customize

Here's ALL I have in there:

[Only registered and activated users can see links. ]

[Megatron817]

In your settings file look for a line with this.
config.usage.setup_level=expert
If it is not expert change to expert or add that line at the bottom of the settings file.

[MikeB]

In your settings file look for a line with this.
config.usage.setup_level=expert
If it is not expert change to expert or add that line at the bottom of the settings file.

Thanks! That fixed it right up. Now, I wonder WHY it was missing, because it originally WAS in Expert mode before I flashed it and restored my settings.

Oh, and am I ok with running the GlamourAuraFHD skin, as that restored and seems to be working fine. Yet I know it can cause issues IF it's not specifically tweaked for an image.

[bwe]

I'm having the same problem of "expert" not loading up in 4.1. I'm a novice at this, and I just want to make sure I get it right.

Go to Internal Flash/etc/enigma2. Find settings file. Replace old settings file, with the new settings file. Or, using Windows Notebook, edit or add "config.usage.setup_level=expert". Is this correct? Thank you.

[Megatron817]

I'm having the same problem of "expert" not loading up in 4.1. I'm a novice at this, and I just want to make sure I get it right.

Go to Internal Flash/etc/enigma2. Find settings file. Replace old settings file, with the new settings file. Or, using Windows Notebook, edit or add "config.usage.setup_level=expert". Is this correct? Thank you.

No you don't want windows notepad. Use Notepad ++ Google search for it. You also need PuTTY for telnet. If you have an easy setup probably be better off do a factory reset then set the box up from fresh startup. It will be faster to learn telnet and file transfers but sometimes a fresh start is better. Less chance of a problem.