This may come in handy. My OS Mio 4K+ decided to start bootlooping, so it looks like I'll be restoring one way or another.
(I am hoping that I can still save a bunch of work I did to get it to work with ClearQAM channels over Verizon FiOS service. )
Thanks to the TNAP team for all of their hard work.
Results 31 to 40 of 74
-
10-26-2021,08:51 PM
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Kiss My Assel bandido thanked for this post
-
10-26-2021,10:38 PM
Most bootloops can be solved without restoring or reflashing. Simply open a telnet session and type init 4 then type enigma2. The telnet session should start then stop. The error will be shown when the telnet session stops.
-
11-03-2021,12:36 PM
with great difficulty but with success
the MIO4K succeeded in finding and reading two frequencies
very close and with very small sr.
In reality there are three frequencies side by side.
It manages to see the two extremes.Edision OS mio4K with TNAP-5 ; Channel Master 1,80 ; TBS6983
LNB Ku Band . LNB KA Band 18200-19200 /21200-22200,LNB C band
-
Post Thanks / Like - 1 Thanks, 3 Likes, 0 Kiss My Assel bandido thanked for this post
-
11-15-2021,09:59 AM
I just wanted to get a shout-out to El Bandido, and anybody else that worked to build TNAP 4.1.
GREAT JOB!
It's been absolutely FLAWLESS since I installed it. Keeps NTP time perfectly (finally!), tunes in the Weigel mux channels on 101w every time without grabbing the wrong one, timers work perfectly, and just has given me NO problems at all!
THANKS!My name is Mike.
My posting name at Satguys is Primestar31
-
Post Thanks / Like - 1 Thanks, 6 Likes, 0 Kiss My Assel bandido thanked for this post
-
-
Post Thanks / Like - 4 Thanks, 3 Likes, 0 Kiss My Ass
-
12-15-2021,03:53 AM
Hello el bandido
Very good news.
I think we have to wait a few more days
for this update to be available.Edision OS mio4K with TNAP-5 ; Channel Master 1,80 ; TBS6983
LNB Ku Band . LNB KA Band 18200-19200 /21200-22200,LNB C band
-
12-21-2021,05:12 AM
Hallo
In some images for the MIO4K ( openNFR for example ) the last version is built with the
new Python ( 3,xxx ) , do you know what it brings ? Is it a progress ?
or is it only a change that doesn't bring much to the user ?
With a little advance; Merry Christmas.
stephan94Edision OS mio4K with TNAP-5 ; Channel Master 1,80 ; TBS6983
LNB Ku Band . LNB KA Band 18200-19200 /21200-22200,LNB C band
-
Post Thanks / Like - 1 Thanks, 1 Likes, 0 Kiss My AssMegatron817 thanked for this postMikeB liked this post
-
12-21-2021,08:45 AM
Python 3 is to update images in the future. The average user will see no difference, except some plugins will not work in Python 3 until they are updated.
-
Post Thanks / Like - 4 Thanks, 0 Likes, 0 Kiss My Ass
-
12-22-2021,12:21 PM
I don't know where to put this comparison of Blindscan .
as TNAP4.1 is part of it I put it here.
Türksat 42° East
a blindscan comparison between
OpenPLI 7.3
OpenPLI 8.1
TNAP 4.0
TNAP 4.1
we can notice that TNAP finds about 10% more transponders than OpenPLI
all these blindscans have been done in the shortest possible time
of course there may be some feeds that appear but the result is clear anyway.Edision OS mio4K with TNAP-5 ; Channel Master 1,80 ; TBS6983
LNB Ku Band . LNB KA Band 18200-19200 /21200-22200,LNB C band
-
Post Thanks / Like - 6 Thanks, 4 Likes, 0 Kiss My Ass
-
12-30-2021,08:49 AMEdision OS mio4K with TNAP-5 ; Channel Master 1,80 ; TBS6983
LNB Ku Band . LNB KA Band 18200-19200 /21200-22200,LNB C band
-
Post Thanks / Like - 2 Thanks, 1 Likes, 0 Kiss My AssMegatron817, darkness thanked for this postnorman881 liked this post