TNAP-4.2-Test Images for Edision MIO/MIO+

[el bandido]

Online update should fix the 5150 blindscan issue.

[stephan94]

Hallo

small problem with the other skins.
when you call (for example with glamour aura skin) the second "infobar" there is a crash.
when I loaded version 4.2 I took the setting of 4.1
here the log error

[stephan94]

to try the blindscan in KA-Band
it is necessary to wait a little bit so that I can
change the specific LNB

[Megatron817]

Audio fixed but 5150 blind scan is finding Horizontal transponders as Vertical and Horizontal. No vertical transponders are found.

[stephan94]

Audio fixed but 5150 blind scan is finding Horizontal transponders as Vertical and Horizontal. No vertical transponders are found.

I confirm the problem that Megatron817 discovered, Blindscan band C does not find anything (L and R) while by manual search everything is there

[cyberham]

Installed and running now on Ku only including all online updates available. I had some green screens of death but they seemed related to attempting blind scan without first scanning in at least one transponder on each satellite. Once at least one transponder was scanned in, then blind scan worked extremely well catching everything. I also had green screens when pressing the yellow or blue button but that was due to not programming those buttons first. The receiver is working well now.

Curious to learn about the "AutoBouquetsMaker" new feature.

[el bandido]

Hallo

small problem with the other skins.
when you call (for example with glamour aura skin) the second "infobar" there is a crash.
when I loaded version 4.2 I took the setting of 4.1
here the log error

Please Check for updates online. Second infobar works fine here.

[Only registered and activated users can see links. ]

[el bandido]

Installed and running now on Ku only including all online updates available. I had some green screens of death but they seemed related to attempting blind scan without first scanning in at least one transponder on each satellite. Once at least one transponder was scanned in, then blind scan worked extremely well catching everything. I also had green screens when pressing the yellow or blue button but that was due to not programming those buttons first. The receiver is working well now.

Curious to learn about the "AutoBouquetsMaker" new feature.

Thanks for the information.
Blindscan should not care if a channel or transponder is scanned. A green screen is nothing more than a recorded error. When the operating sees a fatal error, it records it in a log (crash log or debug log), then restarts the operating system. So usually we have no idea what happened unless the log is attached (See post #12).

TNAP colored buttons are pre-programmed. Here is the way they are setup:
Red = Positioner setup
Green = Channel list
Yellow = Audio selection
Blue = blindscan.

Pressing the yellow button would cause a crash. Online updates have fixed this issue.
Colored remote buttons may also be changed or programmed by the user.

The AutoBouquetsMaker plugin automatically makes bouquets. This plugin is designed for use in Europe. AutoBouquetsMaker contains a scanner that is currently being used in the Signal finder plugin. I will have to figure out what needs to be done in this area. Maybe keep the scanner and ditch the rest of the plugin if that is possible? AutoBouquetsMaker could be made or designed to work in North America, similar to how it works in Europe. But no one seems interested in doing the needed work.

[Only registered and activated users can see links. ]

[Megatron817]

Here's the crash log for blind scan Cyberham had reported about needing to manual scan a transponder first.

[stephan94]

Please Check for updates online. Second infobar works fine here.

Thanks a lot
Now it works; even with an imported skin