Download and uzip the attached file. Install the file in your receiver at the location shown below, then Reboot the receiver. Problem should no longer exist.
/usr/lib/enigma2/python/Plugins/SystemPlugins/PositionerSetup
Or wait and it will be in the next build...
Thread: TNAP-5-Test Thread
Results 61 to 70 of 110
-
03-04-2023,11:53 PM
-
03-05-2023,01:18 PM
Good. it is fixed now.
thanks.Nihil sine Deo !
-
Post Thanks / Like - 1 Thanks, 1 Likes, 0 Kiss My Assel bandido thanked for this postMegatron817 liked this post
-
03-06-2023,09:33 AM
Hallo,
I have just installed version 5.0,
When I ask the question HDMI or RCA when I say OK, there is a green screen,
I also did the update
for the moment the only big problem : the blindscan doesn't want to work
( very annoying because it's its particularity with MIS and T2MI)
I press on blindscan, it does nothing, no green screen either, the receiver does not react.
the Blindscan plugin is well installed
Here is the crash log that is in the receiver
I have just made the modification to message 37: it worksEdision OS mio4K with TNAP-5 ; Channel Master 1,80 ; TBS6983
LNB Ku Band . LNB KA Band 18200-19200 /21200-22200,LNB C band
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Kiss My Assel bandido thanked for this post
-
03-06-2023,12:31 PM
That problem should already be fixed. Do Online update or this in telnet: opkg update && opkg upgrade
Thanks.
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Kiss My Assstephan94 thanked for this post
-
05-22-2023,11:34 AM
New Test Images are in these links:
[Only registered and activated users can see links. ]
[Only registered and activated users can see links. ]
[Only registered and activated users can see links. ]
The new TNAP-5 Test image is much more stable as compared to previous versions. It is suggested to install these images instead of trying to online update due to the number of changes in them. It should be OK to use a backup from a previous TANP-5 Test Image.
-
Post Thanks / Like - 2 Thanks, 1 Likes, 0 Kiss My AssMegatron817, Executive thanked for this postMikeB liked this post
-
05-22-2023,06:15 PM
Loads and runs fine on first startup but after setup and a reboot it gets stuck on the Edision splash screen. This has happened twice the first time I did not auto restore. Scanned some channels and added my picons and did a reboot and it got stuck on Edision splash screen attempted to reboot with telnet a few times but would not so rebooted in another slot and reflashed again and it booted up fine but this time I did auto restore every thing looked good but after a reboot same thing happened stuck on Edision slash screen. I did FTP in and found a crash log. something about no framebuffer available. I'll attach the log.
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Kiss My Assel bandido thanked for this post
-
05-22-2023,06:20 PM
Which skin were you using?
-
05-22-2023,06:24 PM
The Glamour skin has this problem:
Traceback (most recent call last):
File "/usr/lib/enigma2/python/Navigation.py", line 86, in dispatchEvent
File "/usr/lib/enigma2/python/Components/PerServiceDisplay.py", line 17, in event
File "/usr/lib/enigma2/python/Components/Sources/CurrentService.py", line 28, in serviceEvent
File "/usr/lib/enigma2/python/Components/Element.py", line 91, in changed
File "/usr/lib/enigma2/python/Tools/CList.py", line 7, in __call__
File "/home/pli/builds/tnap-5-12-8-2022/openpli-oe-core/build/tmp/work/all-oe-linux/enigma2-plugin-skins-glamouraurafhd/6.0.5+gitAUTOINC+e590bc542a-r0/image/usr/lib/enigma2/python/Components/Converter/GlamourAccess.py", line 1316, in changed
File "/usr/lib/enigma2/python/Components/Element.py", line 91, in changed
File "/usr/lib/enigma2/python/Tools/CList.py", line 7, in __call__
File "/usr/lib/enigma2/python/Components/Renderer/Label.py", line 25, in changed
File "/usr/lib/enigma2/python/Components/Element.py", line 18, in wrapper
File "/home/pli/builds/tnap-5-12-8-2022/openpli-oe-core/build/tmp/work/all-oe-linux/enigma2-plugin-skins-glamouraurafhd/6.0.5+gitAUTOINC+e590bc542a-r0/image/usr/lib/enigma2/python/Components/Converter/GlamourAccess.py", line 662, in getText
File "/home/pli/builds/tnap-5-12-8-2022/openpli-oe-core/build/tmp/work/all-oe-linux/enigma2-plugin-skins-glamouraurafhd/6.0.5+gitAUTOINC+e590bc542a-r0/image/usr/lib/enigma2/python/Components/Converter/GlamourAccess.py", line 999, in CamName
TypeError: exists() takes 1 positional argument but 2 were given
-
-
05-22-2023,07:29 PM
Reflashed again on the third try no auto restore and left Glamour skin as installed and yes Glamour skin has a Problem and crash also after a channel scan and attempting to select a channel. I am thinking the first problem maybe related to the ATSC channels because after scanning those in and a reboot is when the stuck on the Splash screen happens. I need to reflash again and check that for sure.