TNAP-4.2 Images - 20220912 - Discussion

[Megatron817]

I have noticed one possible bug in 4.2 for me anyway. I am using a 10600 universal on my dish for 87W and when I set it up as universal and press the green button to save when I exit the setup pages I'm fine on 87. I have been having strange problems with COZI on KU which for me is on a fixed GeoSat dish using a GeoSat Pro standard with 10750 LO For some reason it was fine last night but not working this afternoon. Anyway when I tune to COZI and then return to LPB it is out also but the LO frequency has shifted to 10750 also and should be 10600. Anyone else with a LNB setup like mine experiencing such a problem? Other than that everything is smooth as silk for me. But then again if something silly is going to happen most likely it will happen to me LOL For further reference I forgot to mention this is working through a Diseqc 1.0 switch on port 4 but this shouldn't be of any concern.

Thanks in Advance


WT

No problem like that here. I've got a universal lnbf on ses 10 ku labled lnb 3 and standard lnbf ses 3 ku labled lnb 1. My lnb 2 is C band all all through a DiSEqC 1.0 port A is lnb 1, port B is lnb 2 and port C is lnb 3. You got to set your ports up correctly.

[el bandido]

TNP 4.2 uses the same diseqc and lnb commands as TNAP 4.1 and TNAP 4.0. So it is doubtful the image is the problem. You may post your settings file in /etc/enigma2 if you continue to have problems.

[sattech64]

I will keep watching to see how things go. The cozi problem was it was switched to a C band LOF ! Is there a specific exit sequence that should be used after saving a setting? I'm with you I highly doubt there is a problem with this version but thought I'd check to sure since it has happened more than once. FWIW the USALS seem to show a slightly different calculation that the previous version. I had to move my dish maybe 1/4 inch west to lock and ID 87 So maybe my motor problems are over I
l will check that out after tomorrow when my wifes shown on LPB records tomorrow LOL

Thanks for the help! And Thanks for your work on compiling this version!!

[sattech64]

Thanks for the confirmation. The problem is that sometimes after setting a LNB LO next time you switch to a KU signal the LO may be 10750 or 5150 instead of say 10600
Bound to be something very simple I'm doing after setting up the LNB. I did notice that one of my fixed dishes was on the wrong port.

[el bandido]

As mentioned in post#11, Each lnb needs a different lnb number.

[sattech64]

Yeah I'm aware of that and I started from scratch at LNB 1 and configuring it as 10750 2 as 5150 and 3 as 10600
Maybe that will alleviate my problem. So far it's done fine

Thanks for the suggestion!

WT

[navagator]

Found a new menu item in TNAP 4.2 on the mio4k and it was installed part of the Pluto tv Plugin. Menu/setup/System/ServiceApp. Now that I have set it to On and gstplayer as the player the channels are playing better with the advertisements. I'll post some screenshots of how I have mine setup.
Found If you want to play the youtube plugin turn the serviceAPP off to get the youtube videos playing.

Are the commercials still working for you in Pluto? Mine don't, it just goes to a black screen and the the programming never comes back on.

[Megatron817]

Are the commercials still working for you in Pluto? Mine don't, it just goes to a black screen and the the programming never comes back on.

Some Pluto commercial breaks are ok on some channels. I got a plugin AJ Player Bar that I use to restart the stream when it needs it but it still not perfect. Some of the streams jump back a few minutes when refreshing. The Pluto VOD plays fine on tnap 4.2 but the time remaining counter gets off so you don't know how much longer the show or movie is a lot of the time. tnap 5. is not good for the Pluto VOD is freezes up alot can't finish the show.

[navagator]

Some Pluto commercial breaks are ok on some channels. I got a plugin AJ Player Bar that I use to restart the stream when it needs it but it still not perfect. Some of the streams jump back a few minutes when refreshing. The Pluto VOD plays fine on tnap 4.2 but the time remaining counter gets off so you don't know how much longer the show or movie is a lot of the time. tnap 5. is not good for the Pluto VOD is freezes up alot can't finish the show.

Okay, well maybe the Pluto plugin will be improved someday. I hope so, I really like it.

Thanks

[maor77gt]

Will it be possible for you to enable the option to install oscam please