TNAP-5 Image Discussion

[lme]

Do another online update and see if the signal db problem is fixed. Thanks.

Yes. It is fixed. Thx !
[Only registered and activated users can see links. ][Only registered and activated users can see links. ]

Both images are listing: "Enigma version......xxxx-xx-xx (develop)".

[el bandido]

Why does this bother you? "Enigma version......xxxx-xx-xx (develop)". Would you like the wording or something else changed?

It shows Develop because the enigma2 is being built from what was originally the Develop branch. Maybe we should change it from Develop to Custom or something...

Thanks for verifying the problem is fixed!!!!

[lme]

Why does this bother you? "Enigma version......xxxx-xx-xx (develop)". Would you like the wording or something else changed?

It shows Develop because the enigma2 is being built from what was originally the Develop branch. Maybe we should change it from Develop to Custom or something...

Thanks for verifying the problem is fixed!!!!

No, it doesn't bother me at all. It may be confusing for others.
Maybe the name of the image in About screen, can be changed to "Tnap 5-MOD" like the Tuner is showing in the scanning screen. Just a suggestion !
About 121W/4151H, is active on weekends starting at 10-11 pm, eastern time:
[Only registered and activated users can see links. ][Only registered and activated users can see links. ]

[el bandido]

Now for the bad part of the db signal "fix".

The No-T2MI avl6261 driver will display what ever the value was on the Last signal when there is No signal. In other words, you may have a signal showing 13db when no signal exists as shown earlier by lme. So we have a 2 way split:

(1) The enigma2 code has to be written so the signal has to be locked for the No-T2MI tuner to display snr in db correctly.
(2) The T2MI drivers do not seem to care if the signal is locked or not to display the signal correctly.

We have a splitter that is not used in Antenna settings called Force Legacy Signal Stats. The default for this is Off (false). So default will run normal and when Force Legacy Signal Stats is set to ON, then enigma2 will set the signal in db whether there is a lock or not, providing of course there is some sort of signal to set.

So the proper setting in Antenna setup is shown below if you want to display signal below lock on the T2MI drivers that can do this.

[Only registered and activated users can see links. ]

[stephan94]

Hello,
after the last update i did a blindscan in C band where there is a lot of T2MI
after the blindscan which worked well i did a channel search of all transponders
suddenly green screen and error followed by new start, why? no idea here is the crash report

[cyberham]

I updated last night. I have lost the SNR reading when using Tuner C with a Hauppauge 950Q USB tuner.

[Only registered and activated users can see links. ]

[el bandido]

Signal in db issues should be fixed with an online update.

[Only registered and activated users can see links. ]


The Force legacy signal stats in Antenna setup should be set to OFF for normal operations.
The Force legacy signal stats in Antenna setup should be set to ON for showing signals levels below lock. This feature is only available with certain tuner modules.

Support is ending for TNAP 5. I age revisions and updates should be available in TNAP 5.1.

[Only registered and activated users can see links. ]

[cyberham]

I updated. It works as you say. But SNR for OTA with Hauppauge 950Q doesn't work.

Added: Just found a new update. Trying it now....second update fixed OTA SNR issue. SNR now appears with Hauppauge. Unlocked signals for satellites still show SNR. Fantastic!

[lme]

TNAP5-MOD has been updated today, but for some reason it shows inconsistency on MIS type tp:
for illustration there are mis tps on 2 diff sats:
121W
[Only registered and activated users can see links. ][Only registered and activated users can see links. ]

87W:
[Only registered and activated users can see links. ][Only registered and activated users can see links. ]

Nothing like this is happening on regular TNAP5.

[el bandido]

TNAP5-MOD has been updated today, but for some reason it shows inconsistency on MIS type tp:
for illustration there are mis tps on 2 diff sats:
121W
[Only registered and activated users can see links. ][Only registered and activated users can see links. ]

87W:
[Only registered and activated users can see links. ][Only registered and activated users can see links. ]

Nothing like this is happening on regular TNAP5.

Apparently there is some confusion, so let's try to explain or clarify this stuff again.

Note: This only pertains to Edision Mio, MIO+, and Mini 4K receivers.

TNAP now has four(4) different avl6261 drivers that can be selected. (Two of these four drivers have been modified.)
TNAP now has two(2) signal settings in Antenna setup.
This means you have 8 possible combinations.

Drivers that have T2MI capability Do Not work on the multi-stream type transponder that is found on 121w c band. The only driver that works with that transponder is the Non-T2MI driver. The other 3 drivers Will Not Work on the 121w c band multi-stream transponder.

Force legacy signal stats in Antenna setup has to be set to OFF for the Non-T2MI driver to work properly.

Modifications were made in enigma2 to allow the 2 avl6261 drivers that are modified to show signal below lock.
Force legacy signal stats in Antenna setup has to be set to ON for the Modified T2MI drivers to work properly.

Here is a screenshot of 121w multi-stream tp using modded T2MI driver and Force legacy signal stats in Antenna setup set to ON:
[Only registered and activated users can see links. ]
(Notice the missing AGC signal???)

Here is a screenshot of 121w multi-stream tp using Non-T2MI driver and Force legacy signal stats in Antenna setup set to OFF:
[Only registered and activated users can see links. ]

Enigma2 Modifications to make all of this work were split in two.
Original Non-Modified Enigma2 code is accessed when Force legacy signal stats in Antenna setup set to OFF.
Modified Enigma2 code is accessed when Force legacy signal stats in Antenna setup set to ON.

The multi-stream transponder not working on T2MI drivers is the problem of Edision or the Manufacturer.
The multi-stream transponder not working on T2MI drivers Is Not the problem of the TNAP image.