The infobarweather has to be added. It is not something that is built automatically. I have added it now, and it will be available when the feeds are updated. Will let you know. Thanks.
Thread: TNAP-5 Image Discussion
Results 11 to 20 of 246
-
07-20-2023,07:28 AM
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Kiss My Asslme thanked for this post
-
07-20-2023,10:03 AM
Loaded TNAP 5 from online download yesterday. I have a question. In TNAP 4.2 when I push the green button it brings up a satellite list. After choosing a satellite I push the green button again and it brings up the scanned in channels.
In TNAP 5 the green button does no longer do this. Is there a way in 5 to do this?
Also I like to have my display on the front of the box turn off when I turn off the box. I wasn't able to find that either.
Thanks for your hard work. Oh and I don't have a clue how to add a file to my TNAP 5 slot. Can the 103 radio channels be added in updates or plugins(extras)?
Lee
EDIT: OK I found out how to pull up my satellite list. Bring up channel list. At the bottom is a button for satellite list.
Edit2: Ok solved the display being on in standby.Last edited by Lee60; 07-20-2023 at 12:35 PM.
-
Post Thanks / Like - 2 Thanks, 0 Likes, 0 Kiss My AssMegatron817, el bandido thanked for this post
-
07-20-2023,03:03 PM
I'll have to check to be for sure but the Radio on 103w ku should be there already unless you over wrote the preinstalled lamedb and satellite xml. Just need to configure the satellite 103.0w SES 3 Mood Radio mux. They are working here but I did over write every thing with my own configs. I will flash a fresh copy of tnap5 in slot 4 and check that.
-
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Kiss My AssMikeB liked this post
-
07-20-2023,04:56 PM
Interesting.
TNAP 5 Should Not be available online as I have not yet included it in any previous feeds. So I wonder what you loaded?
Anyway, music channels on 103w-ku are included in a separate satellite so you can scan 103w-ku and not worry about losing the music channels. This was done because those music channels have to be manually entered into the receiver.
Default settings for TNAP 5 are shown below. This default will be overwritten if you "restore settings" that is different from this.
config.epg.freesat=false
config.epg.netmed=false
config.epg.viasat=false
config.misc.hotkey.blue=MenuPlugin/scan/blindscan
config.misc.hotkey.green=Infobar/openServiceList <--->Channel satellite listings
config.misc.hotkey.red=MenuPlugin/scan/positioner_setup
config.misc.videowizardenabled=false
config.Nims.0.configMode=advanced
config.Nims.1.configMode=advanced
config.ntp.timesync=ntp
config.plugins.bitrate.background=#54111112
config.plugins.bitrate.show_in_menu=infobar
config.plugins.bitrate.style_skin=compact
config.plugins.bitrate.x=1647
config.plugins.bitrate.y=822
config.plugins.bitrate.z=10
config.plugins.weathermsn.city=atlanta
config.plugins.weathermsn.degreetype=F
config.plugins.weathermsn.windtype=fts
config.skin.primary_skin=GlamourAuraFHD/skin.xml
config.usage.infobar_frontend_source=tuner
config.usage.setup_level=expert
config.usage.subnetwork_cable=true
config.usage.subnetwork_terrestrial=true
-
07-20-2023,06:39 PM
"TNAP 5 Should Not be available online as I have not yet included it in any previous feeds. So I wonder what you loaded?"
Probably Tnap5-TEST version....
I did try online update for tnap5, but as you said, is not available yet.Nihil sine Deo !
-
07-20-2023,09:17 PM
Online updates are now available. To update the feeds, run Software update in the receiver.
In terminal, type opkg update && opkg upgrade
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Kiss My Asslme thanked for this post
-
07-21-2023,11:33 AM
Yes I loaded TNAP-Test
I just ran updates too.
Will TNAP 5 be available soon online or should I download to usb?
I'm trying to remember the steps for flashing by usb. I'll read up on it. Can I flash from usb with backup?
Thank you for your help!
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Kiss My Assel bandido thanked for this post
-
07-21-2023,12:07 PM
The test image may have some trash in it. Get a known-to-be-good, EMPTY USB Flash drive. Then do the following:
Download the image that has multiboot in the extension. Do Not unzip it. Put this image in the flash drive.
Insert the flash drive into the receiver. In the receiver menus, go to Flash image. Select the image you installed on the usb drive fro downloaded images.
Select a slot that has with backup written beside. Press the ok button on the receiver remote.
Then do absolutely nothing for 5-10 minutes. Installing the image and restoring everything is done automatically if you follow these steps.
-
07-21-2023,12:41 PM
Thank you el bandido. TNAP 5 with backup is now installed.
I then went to tuner config and 102.9 is there and I added my lnb ect.
If I remember in the past you don't scan for the channels.
I went to Radio and see my favorites(radio)
If i push the green button my satellite list comes up but no 102.9
I don't see it in web if either. Can you please help me out. I must be missing something or forgetting something.
Sorry to be such a pain.
Lee
EDIT: in signal finder I scanned the transponder and now have microspace61
hope I'm not making things worseLast edited by Lee60; 07-21-2023 at 12:55 PM.