TNAP-5 Image Discussion

[jsda30]

hi master.... great job....
i installed the tnap image on my edision os mio 4k...but its are broken... not electric connection!
now i have a octagon sf8008 combo... i want to install tnap image for get the channels under 10750 at 26e with universal lnb...
can you tell me if they can get this tp: 10493 H DVB-S2/8PSK 1000 3/5 at 25E?
or only work with the edision os mio avl6261 turner modification?
thanks in advanced!!

[stephan94]

now i have a octagon sf8008 combo... i want to install tnap image for get the channels under 10750 at 26e with universal lnb...
can you tell me if they can get this tp: 10493 H DVB-S2/8PSK 1000 3/5 at 25E?
or only work with the edision os mio avl6261 turner modification?

Hello
it only works for "Edision" receivers.
in the plugins, the "extras" with this possibility is not present

[el bandido]

The infobarweather has to be added. It is not something that is built automatically. I have added it now, and it will be available when the feeds are updated. Will let you know. Thanks.

[Lee60]

Loaded TNAP 5 from online download yesterday. I have a question. In TNAP 4.2 when I push the green button it brings up a satellite list. After choosing a satellite I push the green button again and it brings up the scanned in channels.
In TNAP 5 the green button does no longer do this. Is there a way in 5 to do this?

Also I like to have my display on the front of the box turn off when I turn off the box. I wasn't able to find that either.

Thanks for your hard work. Oh and I don't have a clue how to add a file to my TNAP 5 slot. Can the 103 radio channels be added in updates or plugins(extras)?

Lee

EDIT: OK I found out how to pull up my satellite list. Bring up channel list. At the bottom is a button for satellite list.
Edit2: Ok solved the display being on in standby.

[Megatron817]

Loaded TNAP 5 from online download yesterday. I have a question. In TNAP 4.2 when I push the green button it brings up a satellite list. After choosing a satellite I push the green button again and it brings up the scanned in channels.
In TNAP 5 the green button does no longer do this. Is there a way in 5 to do this?

Also I like to have my display on the front of the box turn off when I turn off the box. I wasn't able to find that either.

Thanks for your hard work. Oh and I don't have a clue how to add a file to my TNAP 5 slot. Can the 103 radio channels be added in updates or plugins(extras)?

Lee

EDIT: OK I found out how to pull up my satellite list. Bring up channel list. At the bottom is a button for satellite list.
Edit2: Ok solved the display being on in standby.

I'll have to check to be for sure but the Radio on 103w ku should be there already unless you over wrote the preinstalled lamedb and satellite xml. Just need to configure the satellite 103.0w SES 3 Mood Radio mux. They are working here but I did over write every thing with my own configs. I will flash a fresh copy of tnap5 in slot 4 and check that.

[Megatron817]

I'll have to check to be for sure but the Radio on 103w ku should be there already unless you over wrote the preinstalled lamedb and satellite xml. Just need to configure the satellite 103.0w SES 3 Mood Radio mux. They are working here but I did over write every thing with my own configs. I will flash a fresh copy of tnap5 in slot 4 and check that.

Yes. The radio on 103ku is preinstalled with Tnap5. The satellite to configure is 102.9w ku-band Muzak Radio channels. switch to radio mode then find the 102.9w ku-band Muzak Radio channels in the satellite list.

[el bandido]

Interesting.

Loaded TNAP 5 from online download yesterday. .

TNAP 5 Should Not be available online as I have not yet included it in any previous feeds. So I wonder what you loaded?

Anyway, music channels on 103w-ku are included in a separate satellite so you can scan 103w-ku and not worry about losing the music channels. This was done because those music channels have to be manually entered into the receiver.

Default settings for TNAP 5 are shown below. This default will be overwritten if you "restore settings" that is different from this.

config.epg.freesat=false
config.epg.netmed=false
config.epg.viasat=false
config.misc.hotkey.blue=MenuPlugin/scan/blindscan
config.misc.hotkey.green=Infobar/openServiceList <--->Channel satellite listings
config.misc.hotkey.red=MenuPlugin/scan/positioner_setup
config.misc.videowizardenabled=false
config.Nims.0.configMode=advanced
config.Nims.1.configMode=advanced
config.ntp.timesync=ntp
config.plugins.bitrate.background=#54111112
config.plugins.bitrate.show_in_menu=infobar
config.plugins.bitrate.style_skin=compact
config.plugins.bitrate.x=1647
config.plugins.bitrate.y=822
config.plugins.bitrate.z=10
config.plugins.weathermsn.city=atlanta
config.plugins.weathermsn.degreetype=F
config.plugins.weathermsn.windtype=fts
config.skin.primary_skin=GlamourAuraFHD/skin.xml
config.usage.infobar_frontend_source=tuner
config.usage.setup_level=expert
config.usage.subnetwork_cable=true
config.usage.subnetwork_terrestrial=true

[lme]

"TNAP 5 Should Not be available online as I have not yet included it in any previous feeds. So I wonder what you loaded?"
Probably Tnap5-TEST version....
I did try online update for tnap5, but as you said, is not available yet.

[el bandido]

Online updates are now available. To update the feeds, run Software update in the receiver.

In terminal, type opkg update && opkg upgrade

[Lee60]

Yes I loaded TNAP-Test
I just ran updates too.
Will TNAP 5 be available soon online or should I download to usb?
I'm trying to remember the steps for flashing by usb. I'll read up on it. Can I flash from usb with backup?
Thank you for your help!