TNAP-6 Image Discussion

[EnoSat]

UCLAN Ustym 4K PRO
The LAN connection is disabled in the installation. Only WLAN is enabled.
The installation then stops at the message not have internet. If I skip the wizard I see the LAN is disabled.
Next problem - after selecting the time zone and selecting Next Wizard, the enigma crashes.

[EnoSat]

TNAP 6 ustym4kpro
ustym4kpro login: root
root@ustym4kpro:~# opkg update
Downloading http://downloads.openpli.org/feeds/openpli-develop/3rd-party-cortexa15hf-neon-vfpv4/Packages.gz.
 * opkg_download_backend: Failed to download http://downloads.openpli.org/feeds/openpli-develop/3rd-party-cortexa15hf-neon-vfpv4/Packages.gz, wget returned 4.
Downloading http://downloads.openpli.org/feeds/openpli-develop/3rd-party/Packages.gz.
 * opkg_download_backend: Failed to download http://downloads.openpli.org/feeds/openpli-develop/3rd-party/Packages.gz, wget returned 4.
Downloading http://downloads.openpli.org/feeds/openpli-develop/3rd-party-ustym4kpro/Packages.gz.
 * opkg_download_backend: Failed to download http://downloads.openpli.org/feeds/openpli-develop/3rd-party-ustym4kpro/Packages.gz, wget returned 4.
Downloading http://162.216.113.217/tnap6/all/Packages.gz.
Updated source 'TNAP-all'.
Downloading http://162.216.113.217/tnap6/cortexa15hf-neon-vfpv4/Packages.gz.
Updated source 'TNAP-cortexa15hf-neon-vfpv4'.
Downloading http://downloads.openpli.org/feeds/openpli-develop/picons/Packages.gz.
 * opkg_download_backend: Failed to download http://downloads.openpli.org/feeds/openpli-develop/picons/Packages.gz, wget returned 4.
Downloading http://162.216.113.217/tnap6/ustym4kpro/Packages.gz.
Updated source 'TNAP-ustym4kpro'.
root@ustym4kpro:~# opkg upgrade
Upgrading openpli-bootlogo (20250106-r0) to openpli-bootlogo (20250107) on root
Downloading http://162.216.113.217/tnap6/cortexa15hf-neon-vfpv4/openpli-bootlogo_20250107-r0_cortexa15hf-neon-vfpv4.ipk.
[eTSMPEGDecoder] showSinglePic /usr/share/bootlogo.mvi
########################
DNS =  192.168.1.1
########################
---------------Netwrork Interface Found--------------Attempting to run /usr/sbin/ntpd -nq -p pool.ntp.org----------------------------------------------------------
PING 8.8.8.8 (8.8.8.8): 56 data bytes
64 bytes from 8.8.8.8: seq=0 ttl=118 time=12.493 ms

--- 8.8.8.8 ping statistics ---
1 packets transmitted, 1 packets received, 0% packet loss
round-trip min/avg/max = 12.493/12.493/12.493 ms
10 Jan 21:52:43 ntpd[2168]: ntpd 4.2.8p17@1.4004-o Tue Jun  6 11:40:37 AM UTC 2023 (1): Starting
10 Jan 21:52:43 ntpd[2168]: Command line: /usr/sbin/ntpd -nq -p pool.ntp.org
10 Jan 21:52:43 ntpd[2168]: ----------------------------------------------------
10 Jan 21:52:43 ntpd[2168]: ntp-4 is maintained by Network Time Foundation,
10 Jan 21:52:43 ntpd[2168]: Inc. (NTF), a non-profit 501(c)(3) public-benefit
10 Jan 21:52:43 ntpd[2168]: corporation.  Support and training for ntp-4 are
10 Jan 21:52:43 ntpd[2168]: available at https://www.nwtime.org/support
10 Jan 21:52:43 ntpd[2168]: ----------------------------------------------------
10 Jan 21:52:43 ntpd[2168]: DEBUG behavior is enabled - a violation of any
10 Jan 21:52:43 ntpd[2168]: diagnostic assertion will cause ntpd to abort
10 Jan 21:52:43 ntpd[2168]: proto: precision = 1.333 usec (-19)
10 Jan 21:52:43 ntpd[2168]: basedate set to 2023-05-25
10 Jan 21:52:43 ntpd[2168]: gps base set to 2023-05-28 (week 2264)
10 Jan 21:52:43 ntpd[2168]: unable to bind to wildcard address :: - another process may be running - EXITING
-----------------------------------Success!---Updated hwclock!---Finished----------------------------------------------------------
update-rc.d: /etc/init.d/bootlogo exists during rc.d purge (continuing)
 Removing any system startup links for bootlogo ...
  /etc/rcS.d/S21bootlogo
Configuring openpli-bootlogo.
 Adding system startup for /etc/init.d/bootlogo.
root@ustym4kpro:~#

[EnoSat]

It is not possible to select satellites for tuners. After pressing OK, the enigma crashes.

[el bandido]

A fresh set of images here: [Only registered and activated users can see links. ]

Octagon SF8008 and Ustym4kPro can flash TNAP 6 test images online using receiver menus, provided the image is TNAP 5 or TNAP 5.1.

Edision MIO Images are included, but untested.

Type 32 has been added to channel selection

Boot and overall performance should be better for SF8008 and Ustym4kPro.

The failed to download 3rd party packages in opkg is OK because there are currently no third party packages.

Several tricks or hacks were made to get this image version to work.TNAP-6 OpenPLi branch is Scarthgap. The Sf8008 currently has display problems in Scarthgap, so some drivers were "borrowed" from Ustym4kPro to make the SF8008 work. The borrowed drivers caused a Broken blindscan for Ustym4kPro, and also caused the SF8008 to read as Ustym4kPro. A solution for this has been found. (Octagon SF8008 = Octagon Sf8008 now, & Ustym4kPro blindscans... )

The driver hack mentioned above caused the need for blindscan plugin to be altered, thus killing blindscan in Ustym4kPro. This has been corrected and blindscan should work now in Ustym4kPro.

The Scarthgap Branch calls for a time change to ntp-ntpd format. This has caused time issues, but should be mostly corrected now.

BusyBox is apparently pinging the network on Boot-Start-Up. This issue is causing a longer Boot-StartUp time.


TNAP 6 looks better here from what I see, but it has a ways to go yet. Hopefully the updated images show improvements. Scarthgap should prove to be a good branch to build from.

[Only registered and activated users can see links. ]

[Only registered and activated users can see links. ]

[EnoSat]

Upgrade now done. Satellite selection is functional. Selection timezone Europe - Bratislava ok.
I'll try a complete clean install.

[Megatron817]

On the Mio4k+ the network adapters were both off at start up I activated LAN and It shows both adapters are activated now deactivated Lan and scanned for wireless and setup wireless and it is working but still shows both adapters activated. must be a bug. Tried blind scan and it said no blindscan at usr/bin found it was named blindscan-s2 so fixed that and blindscan now starts but no transponders found after about 2 seconds. thats all I found so far. Thanks

[Megatron817]

The Network adapters seems to have fixed itself after setting up both and deactivating both. now I can set either or and only one shows activated.

[cyberham]

...Tried blind scan and it said no blindscan at usr/bin found it was named blindscan-s2 so fixed that and blindscan now starts but no transponders found after about 2 seconds. thats all I found so far. Thanks

I'm basically where you are. TNAP6 is running with no blindscan capability. One wrinkle is I tried going to Deep Standby. After doing this, the receiver wouldn't start. It hung each time it booted. Even directing it to start again from the TNAP6 slot didn't fix. So I reflashed TNAP6 and then all was back to normal. I won't go to Deep Standby again.

[Megatron817]

Well after a full reboot found the network adapters show both on again. That setting most not be saving.

[el bandido]

On the Mio4k+ the network adapters were both off at start up I activated LAN and It shows both adapters are activated now deactivated Lan and scanned for wireless and setup wireless and it is working but still shows both adapters activated. must be a bug. Tried blind scan and it said no blindscan at usr/bin found it was named blindscan-s2 so fixed that and blindscan now starts but no transponders found after about 2 seconds. thats all I found so far. Thanks

You may try this and see if blindscan works:
Download and unzip attached blindscan binary
Put blindscan binary in /usr/bin of receiver files
To activate the blindscan binary, Telnet into the box using these commands:
cd /usr/bin
chmod 0755 blindscan
To verify, enter ls -l in telnet. The blindscan binary should be shown green or the same color as the rest of the binaries or scripts.
Finally, type reboot in telnet.