hd-2 receiver firmware is similar,but it's a dual tuner receiver.The .abs file was 3.6meg,which is smaller than the usual 4meg s10 firmware.It attempts to boot on the s10,but fails the second tuner test.The sharp 7306 tuner shows as a avlink sp2227 tuner.The front panel is wrong,the s10 uses led and not vfd.
Code:
[Boot Ver 1.5]APP init ok (VFD 1_2)
VFD Panel Init
MC: APP	init ok
Serit Arioha tuner module
AVLink Tuner Setup
SP2227 Tuner Detected
[NETWORK]net_enc28j60_attach >>>>>>>>>>>
[NETWORK]eeprom I2C Fail!!!
[AppInit]system_hw_init >> success
NIM OK
device: [nim 0] open success!
_SUPPORT_TWO_TUNER >>>>>>>>
device: [nim 1] open failed!
Reset tuner2 2 time!!!
ERROR: reset nim2 failed!!!