The unit came with 3/22 firmware, What firmware should we have on the the units at this time. This is the Optibox Anaconda Question Thread. I'm going to have alot of Questions lol
Thread: Optibox Anaconda Question Thread
Results 21 to 30 of 127
-
Bellboy Guest04-19-2012,01:38 PM
-
-
04-19-2012,01:58 PM
The Anaconda NTSC firmware is what you want to load. I do not know the build date on it, but the NTSC file is posted on this site.
.
.
.
Meine Dreambox One ist ein Stück Scheiße!.
-
04-19-2012,07:11 PM
Wish Mine Would get here been sitting in NY since the 14th.
-
04-20-2012,10:48 AM
It Here Time To Play And Ask Questions.
-
04-20-2012,11:10 AM
First question tying to load ntsc file 10 min and it still says do not turn off receiver how long dose it take.
-
04-20-2012,11:14 AM
It takes between 5 and 10 minutes to load a firmware file.
What kind of usb stick are you using and how many MB will it hold?.
.
.
Meine Dreambox One ist ein Stück Scheiße!.
-
04-20-2012,11:19 AM
its a 4gb PNY
-
04-20-2012,11:34 AM
it should be formatted to FAT32. The NTSC file should be unzipped and placed on the usb stick by itself.
.
.
.
Meine Dreambox One ist ein Stück Scheiße!.
-
04-20-2012,11:40 AM
Also I high quality USB flash drive is recommended..Kingston is the recommended brand. If you have gone longer that 10 minutes I would remove the USB flash drive and do a hard boot from the rear switch.
You can try again and make sure that Drive is formatted..but if you still have problems I would get a Kingston stick.
click click b00m