Results 1 to 3 of 3
  1. Collapse Details
    Help splitting signal from 1 satellite to 2 receivers
    #1
    Join Date
    Feb 2011
    Location
    New England
    Posts
    3,550
    Post Thanks / Like
    Contribute If you enjoy reading the
    content here, click the below
    image to support our site.
    Click Here To Contribute To Our Site
    I have a couple of stationary dishes with single output lnb's that I would like to split off to another receiver. I prefer to use some kind of splitter if at all possible. Is there a splitter that works for this? I understand the polarity has to be the same on both receivers but this is not an issue because the lnb has to be turned to change polarity.
    Reply With Quote
     

  2. Collapse Details
    #2
    Join Date
    Dec 2010
    Location
    Atlanta, Ga.
    Posts
    8,188
    Post Thanks / Like
    I have never been a fan of a splitter connecting two fta receivers together because of the voltages the receivers send down the coax. Either use a A/B switch or invest in dual lnbs.
    .
    .
    .
    Meine Dreambox One ist ein Stück Scheiße!.
    Reply With Quote
     

  3. Collapse Details
    #3
    Join Date
    May 2011
    Posts
    5,807
    Post Thanks / Like
    you will need a 3x4 or a 4x4 and one diseqc for each box. If using a single LNB then you need to choose which polarity you want to download (13V for verticals and 18V for Horizontals). Here is a thread from a friend in a very close and trusted forum with differents configuration so you can take a look, Good Luck

    [Only registered and activated users can see links. ]
    Last edited by Bellboy; 04-24-2012 at 06:29 AM. Reason: removed live link
    Reply With Quote
     

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •