Thread: Will this work?

Results 1 to 5 of 5
  1. Collapse Details
    Will this work?
    #1
    Bellboy Guest
    Will this work?

    I have my KU dish & C Band dish . I want to run both to a DiseqC switch my KU to LNB1 & C Band to LNB2 then run one line into the house, will this work?
    Reply With Quote
     

  2. Collapse Details
    #2
    Join Date
    May 2011
    Posts
    5,807
    Post Thanks / Like
    Bellboy
    Do you run a motor or your Dishes are fixed?? If they're fixed then you can add up to 4 LNBs to the diseqc switch and Yes, they can be a mixed of KU and C band together.
    Reply With Quote
     

  3. Collapse Details
    #3
    Bellboy Guest
    Run a motor on the KU & Actuator on C Band, Thanks
    Reply With Quote
     

  4. Collapse Details
    #4
    Guest Guest
    As long as your dishes are being moved by seperate stand alone positioners then you shouldn't have any problems with that. For example, if port 1 is your c band dish then you would have to tell your positioner where to send the dish and visa-versa for the other dish. I'm not a switch expert though BB, it would good to see others chime in on this one.
    Reply With Quote
     

  5. Collapse Details
    #5
    Join Date
    Mar 2012
    Posts
    62
    Post Thanks / Like
    having a coax for each dish will keep the switching simple. I have a SV8000hd and have 6 LNB's wired to it. It has a 4 port Disqc and 22khz 2 port switches. could have used the positioning trick but this works ok. Bud c-ku,and ku dishes.
    Reply With Quote
     

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •