I killed my x2 back in june with bogus firmware and wang attempted to send me 2 pre programmed flash chips but he sent it registered mail to a p.o. box that I used a fake name with and they sent the package back to china.At least he made the attempt on helping me get the box fixed.
Thread: so close
Results 1 to 8 of 8
-
so close – 09-13-2013,04:04 PMor am I being obtuse?
-
09-13-2013,04:13 PM
Jonny Quest laughs at you outsmarting yourself, Dr. ZIN! If that is your real name! LOL!
Whoops, now I guess I dated myself!Last edited by MikeB; 09-13-2013 at 04:30 PM.
-
09-13-2013,04:35 PM
Welcome back Dr Zin! Long time no see!
Portable Comtech 13', Winegard 10', SAMI 7.5', 3 39" Ku dishes one motorized. Scanning 30w-131w
-
09-13-2013,04:37 PM
There's a name from the past. Welcome back Dr. Zin!!
Optibox Anaconda, X2, OpenBox-S9, CS8000 and 2 X CW700S, 7 1/2' Perfect Ten scanning 55W to 139W C Band and a 39" Q-Sat scanning 30W to 125W Ku Band
-
09-13-2013,04:40 PM
The x is back! Nice to see you again !!
X2 Premium III HD, Openbox X5/ S10, Gsky V3/V6, iSmart m100
-
09-13-2013,05:59 PM
usbjtagnt will program spi flash,but only the newer versions of the device.
Mine was an old one and Master Li updated mine for free because of my help in the past.
I never got around to making the interface from that to the actual chip,which has been desoldered from the mainboard already.None of the lpt based programmers would work that I could find on the net.or am I being obtuse?
-
09-14-2013,05:46 AM
Been a while Dr. Zin, welcome back.
-
09-15-2013,06:43 PM
I had a bunch of blank flash chips from the openbox days but they are too small,only 4meg.
or am I being obtuse?