Hello, everyone
Long time member of Satelliteguys (also as comfortably_numb) and have finally decided it's time to join this forum, at the prodding of my friends there.
Here's the issue we discovered recently; the NBC VOD 9 and NBC VOD 13 channels no longer log in OpenVIX, OpenPLi or TNAP. They do, however, log on my Amiko HD.265 appliance STB.
@rayydio says he was able to log them using OpenSpa, but I have not tried that yet.
Any ideas?
Results 1 to 10 of 15
-
OS MIO 4K NBC VOD 9 & VOD 13 issues on 103 – 06-08-2019,12:43 PM
Last edited by comfortably_numb; 06-08-2019 at 09:21 PM.
-
Post Thanks / Like - 4 Thanks, 0 Likes, 0 Kiss My Ass
-
06-08-2019,01:49 PM
Hello & Welcome to Legit!
I will take a guess that these channels are on the 11880H 30,000 SR transponder?
The channels you mention are in channel files that are about 1 month old. I notice Lyngsat does not include these channels, but SatHint does. So one of those sites is wrong it would seem.
NBC VOD 9 and NBC VOD 13 are not found in a transponder scan or a blind scan. I assume they are not active right now. Please verify for me that these two channels are working on your Amiko this afternoon. Maybe we can figure out what the problem is if they are active today. Thanks.Last edited by el bandido; 06-08-2019 at 02:38 PM.
-
Post Thanks / Like - 2 Thanks, 0 Likes, 0 Kiss My AssViP3R, mountaineer thanked for this post
-
06-08-2019,02:44 PM
Looking at the scan log will usually tell us if channels are being scanned, then discarded as being bad or unsuitable.
Telnet command for OpenPli based images = init 4 && ENIGMA_DEBUG_LVL=5 enigma2
[eDVBScan] ONID: 0001
[eDVBScan] SID 0001: is free
[eDVBScan] name 'Ch09 NBC East HD', provider_name 'NBC'
[eDVBScan] SID 0002: is free
[eDVBScan] name 'Ch10 NBC Central HD', provider_name 'NBC'
[eDVBScan] SID 0006: is free
[eDVBScan] name 'Ch13 Occasional', provider_name 'NBC'
[eDVBScan] SID 000e: is free
[eDVBScan] name 'Ch14 Occasional', provider_name 'NBC'
[eDVBScan] SID fffe: is free
[eDVBScan] name 'dl service', provider_name 'NBC'
[eDVBScan] channel done!
[eDVBScan] no channels left: 1 scanned, 0 unavailable, 1 database.
-
Post Thanks / Like - 3 Thanks, 1 Likes, 0 Kiss My Asscomfortably_numb liked this post
-
06-08-2019,07:52 PM
Yes, both feeds are currently active right now in frequency 11880 H 30000, using the Amiko HD.265 receiver. I'd post a screenshot but not sure how to upload images to this forum yet!
Edit: A scan of this frequency on the Amiko doesn't find the VOD feeds. I'm tuning them from a previously stored channel list.Last edited by comfortably_numb; 06-08-2019 at 08:13 PM.
-
Post Thanks / Like - 4 Thanks, 0 Likes, 0 Kiss My Ass
-
06-08-2019,08:59 PM
Pictures or screencaps are nice, but we might make some progress without them.
If the Amiko is not scanning them, then we cannot really expect other receivers to scan them.
Are the stored VOD channels active? Do they have a picture? My stored channel lists that has these VOD channels only had a black screen when I checked earlier this afternoon. If the VOD channels have a picture and sound, please post the PIDS so they can be tested in other receivers.
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Kiss My Assrayydio thanked for this post
-
06-08-2019,09:16 PM--------------------------------------------------------------------------------------
In a cow pasture somewhere on the MO/KS state line
--------------------------------------------------------------------------------------
Ku: GeoSat Pro 1.2m & 90cm dishes, two 76cm Winegard dishes,
Amiko Mini HD.265, Edision OS MIO 4K, 3 Roku sticks, Pioneer AVR,
RCA ANT751R OTA antenna + CM-7777HD preamp, HDHR2-US, Dell HTPC
-
Post Thanks / Like - 2 Thanks, 0 Likes, 0 Kiss My Assel bandido, mountaineer thanked for this post
-
06-08-2019,09:55 PM
Looks like you have a signal, but no picture or audio, correct?
The MIO can also show a signal for a dead channel.
[Only registered and activated users can see links. ]
The MIO will also complain about it, and tell you it is dead. Appliance type receivers may not show this error on a dead channel.
[Only registered and activated users can see links. ]
Enigma2 works a bit different in the information screen. It will only display "live data", whereas a lot of appliance type receivers display whatever was originally stored for the channel. No PIDS are active in the MIO, so none are shown in the info screen.
[Only registered and activated users can see links. ]
Looks like these VOD channels are dead? Cannot do anything else until there is a picture and/or audio on these channels.
-
Post Thanks / Like - 3 Thanks, 0 Likes, 0 Kiss My Ass
-
06-08-2019,09:58 PM
There was video a couple hours ago until NBC Prime Time programming ended. I'll check again tomorrow.
--------------------------------------------------------------------------------------
In a cow pasture somewhere on the MO/KS state line
--------------------------------------------------------------------------------------
Ku: GeoSat Pro 1.2m & 90cm dishes, two 76cm Winegard dishes,
Amiko Mini HD.265, Edision OS MIO 4K, 3 Roku sticks, Pioneer AVR,
RCA ANT751R OTA antenna + CM-7777HD preamp, HDHR2-US, Dell HTPC
-
Post Thanks / Like - 3 Thanks, 0 Likes, 0 Kiss My Ass
-
06-08-2019,10:40 PM
Try to scan it once you see an active picture. I also notice the same video pid being used on Ch09 in the same mux.
Dvbsnoop is also a useful tool that will sometimes find things that are "hidden."
Only returns 4 video streams tonight though.
root@osmio4k:~# dvbsnoop -s pidscan
dvbsnoop V1.4.55 -- [Only registered and activated users can see links. ]
---------------------------------------------------------
Transponder PID-Scan...
---------------------------------------------------------
PID found: 0 (0x0000) [SECTION: Program Association Table (PAT)]
PID found: 1 (0x0001) [SECTION: Conditional Access Table (CAT)]
PID found: 16 (0x0010) [SECTION: Network Information Table (NIT) - actual network]
PID found: 17 (0x0011) [SECTION: Service Description Table (SDT) - actual transport stream]
PID found: 20 (0x0014) [SECTION: Time Date Table (TDT)]
PID found: 32 (0x0020) [SECTION: Program Map Table (PMT)]
PID found: 33 (0x0021) [SECTION: Program Map Table (PMT)]
PID found: 34 (0x0022) [SECTION: Program Map Table (PMT)]
PID found: 52 (0x0034) [SECTION: Program Map Table (PMT)]
PID found: 100 (0x0064) [SECTION: Program Map Table (PMT)]
PID found: 500 (0x01f4) [SECTION: DVB CA message section (EMM/ECM)]
PID found: 501 (0x01f5) [SECTION: User private]
PID found: 512 (0x0200) [PS/PES: ITU-T Rec. H.262 | ISO/IEC 13818-2 or ISO/IEC 11172-2 video stream]
PID found: 513 (0x0201) [PS/PES: ITU-T Rec. H.262 | ISO/IEC 13818-2 or ISO/IEC 11172-2 video stream]
PID found: 514 (0x0202) [PS/PES: ITU-T Rec. H.262 | ISO/IEC 13818-2 or ISO/IEC 11172-2 video stream]
PID found: 515 (0x0203) [PS/PES: ITU-T Rec. H.262 | ISO/IEC 13818-2 or ISO/IEC 11172-2 video stream]
PID found: 751 (0x02ef) [PS/PES: ISO/IEC 13818-3 or ISO/IEC 11172-3 audio stream]
PID found: 752 (0x02f0) [PS/PES: ISO/IEC 13818-3 or ISO/IEC 11172-3 audio stream]
PID found: 753 (0x02f1) [PS/PES: ISO/IEC 13818-3 or ISO/IEC 11172-3 audio stream]
PID found: 754 (0x02f2) [PS/PES: ISO/IEC 13818-3 or ISO/IEC 11172-3 audio stream]
PID found: 761 (0x02f9) [PS/PES: ISO/IEC 13818-3 or ISO/IEC 11172-3 audio stream]
PID found: 762 (0x02fa) [PS/PES: ISO/IEC 13818-3 or ISO/IEC 11172-3 audio stream]
PID found: 763 (0x02fb) [PS/PES: ISO/IEC 13818-3 or ISO/IEC 11172-3 audio stream]
PID found: 764 (0x02fc) [PS/PES: ISO/IEC 13818-3 or ISO/IEC 11172-3 audio stream]
PID found: 771 (0x0303) [PS/PES: ISO/IEC 13818-3 or ISO/IEC 11172-3 audio stream]
PID found: 772 (0x0304) [PS/PES: ISO/IEC 13818-3 or ISO/IEC 11172-3 audio stream]
PID found: 773 (0x0305) [PS/PES: ISO/IEC 13818-3 or ISO/IEC 11172-3 audio stream]
PID found: 774 (0x0306) [PS/PES: ISO/IEC 13818-3 or ISO/IEC 11172-3 audio stream]
PID found: 801 (0x0321) [PS/PES: ISO/IEC 13818-3 or ISO/IEC 11172-3 audio stream]
PID found: 802 (0x0322) [PS/PES: ISO/IEC 13818-3 or ISO/IEC 11172-3 audio stream]
PID found: 803 (0x0323) [PS/PES: ISO/IEC 13818-3 or ISO/IEC 11172-3 audio stream]
PID found: 804 (0x0324) [PS/PES: ISO/IEC 13818-3 or ISO/IEC 11172-3 audio stream]
PID found: 8144 (0x1fd0) [PS/PES: private_stream_1]
PID found: 8145 (0x1fd1) [PS/PES: private_stream_1]
PID found: 8146 (0x1fd2) [PS/PES: private_stream_1]
PID found: 8147 (0x1fd3) [PS/PES: private_stream_1].
.
.
Meine Dreambox One ist ein Stück Scheiße!.
-
Post Thanks / Like - 2 Thanks, 0 Likes, 0 Kiss My Assrayydio, mountaineer thanked for this post
-
06-09-2019,09:04 AM
How does one use Dvdsnoop EB?
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Kiss My Assmountaineer thanked for this post