Particulars for Ku System
Two dishes. One fixed and other motorized with a Stab HH 90. One DISEqC switch utilizing Port A for the fixed and Port B for the motorized. The switch is between the positioner and the two dishes. Both LNBs are INVACOM QPH-031 Quad Polar Ku Band.
Settings are as follows and gave not changed since all was working properly:
LNB LNB 1
Priority Auto
Type of LNB KU STD 10750
Voltage mode Polarization
Increased Voltage On
Tone Mode Band
DISEqC mode 1.2
Fast DISEqC Off
Tone burst Off
DISEqC 1.0 Command Port A or Port B depending on dish selection
DISEqC 1.1 Command Off
Sequence Repeat Off
Use USALS for this sat Off for Port A and On for Port B depending on dish selection.
Results 1 to 10 of 14
Threaded View
-
05-09-2021,06:11 PM
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Kiss My Assel bandido thanked for this post