hello EB
Here is this information.
Regards.
Chewie
Thread: Coming Soon: Zgemma H9s
Results 31 to 40 of 54
-
03-28-2019,01:03 PM
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Kiss My Assel bandido thanked for this post
-
03-28-2019,01:23 PM
Yes. I set accuracy to 5.
Regards.
Chewie
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Kiss My Assel bandido thanked for this post
-
03-28-2019,01:49 PM
The Mutant hd60 does better with accuracy 2,3 and 4. 5 not so good. different results on different satellites.
Here's 3 satellites I got the blindscan performing decent results but I still have to do 2 blindscans on each satellite.
91w ku
11750 start 12150 stop, accuracy 2
12040 start 12150 stop, accuracy 4
103w ku
11750 start 12150 stop, accuracy 3
11900 start 12150 stop, accuracy 3
105w ku
11750 start 12150 stop, accuracy 2
11900 start 12150 stop, accuracy 2Last edited by Megatron817; 03-28-2019 at 01:55 PM.
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Kiss My AssViP3R thanked for this post
-
03-29-2019,11:14 AM
Found a transponder on 91w ku I never got before with start 11900 and stop 12150 with accuracy 5.
DVB-S 11893 v 435 auto QPSK
Has 5 radio channels.Last edited by Megatron817; 03-29-2019 at 11:27 AM.
-
Post Thanks / Like - 1 Thanks, 1 Likes, 0 Kiss My Ass
-
-
04-25-2019,11:15 AM
No I do not have C-band dish. But I setup a c-band lnb in the menu and I don't believe c-band DMM blindscan would work. Just like you can't set the frequencies for c-band in the plugin, only has Ku-band frequencies. Seems from the updates lately Mutant/ax-hd60 and zgemma might be the same manufacturer. Just my guess. Maybe they will change or fix the blindscan in the near future.
-
04-25-2019,01:19 PM
Hello Megatron
I had a tip on another forum and they ask me to set my receiver to these settings:
User Defined:
LO/L 10000
LO/H 10000
I have the threshold set to 11700
With these settings I can change the frequencies on the blind scan screen to these settings:
Start freq. - 11000 Stop Freq. 11700.
It scans C-band now and the scanning is good.
If you get a c-band dish try these settings.
Regards.
Chewie
-
Post Thanks / Like - 2 Thanks, 1 Likes, 0 Kiss My Assel bandido, eastof111 thanked for this postMegatron817 liked this post
-
04-25-2019,04:04 PM
I changed my Standard Ku lnb settings to
LOF/L 10700
LOF/H 10700
Threshold 12200
I can set the blindscan start frequency back to normal 11700 instead of 11750.
Stop frequency normal 12200 instead of 12150.
Now the KU blindscan does a good job with just one blindscan and Accuracy 2 but the only thing found transponders are 50 Mhz off.Last edited by Megatron817; 04-25-2019 at 04:11 PM.
-
04-25-2019,04:51 PM
Nevermind.
My name is Mike.
My posting name at Satguys is Primestar31
-
04-25-2019,09:00 PM
There are two different blindscan plugins. These plugins are located in the blindscan folder under SystemPlugins.
Most enigma2 receivers that support blindscan use the regular plugin, but Zgemma is using the Dream Multi Media or dmmblindscan plugin.
The dmmblindscan plugin has provisions for universal ku lnb. No other lnbs are supported, but you can get this plugin to blindscan other bands and display the wrong transponder frequencies.
The regular blindscan plugin was like this several years ago. Huevos wrote the code needed that allowed c band to blindscan and display the correct transponder frequencies. Recently, Huevos added some user Defined lnb types along with Ka bands to the regular blindscan plugin,
Someone will have to add code similar to what Huevos added in the regular blindscan plugin to the dmmblindscan plugin. The Zgemma will not blindscan other bands besides universal ku until this is done.
-
Post Thanks / Like - 2 Thanks, 0 Likes, 0 Kiss My AssMegatron817, eastof111 thanked for this post