I'm getting ready to install TNAP 3.2 on my Edision 4K, I'm currently running 3.0 which came installed on the receiver. I've never installed a new image yet and I don't want to make any mistakes if I can keep from it. I downloaded the "tnap-3.2-osmio4k_multiboot_ofgwrite.zip" file to my desktop and then placed it into an empty file which I named "downloaded_images". Then I placed it on my empty USB stick. After that I transferred the USB drive to my Edision. I then was able to navigate through the menus and found the file.
[Only registered and activated users can see links. ]
Does this look correct so far? I wan't to flash it to slot 2. I assume I will be asked to choose a slot after I click flash image, is that correct?
Thanks in advance.
Results 171 to 180 of 180
-
07-06-2020,06:04 PMEdision OS Mio 4K, Invel DVB 3612, 12ft Conifer Mesh Bud, DMX 741 LNBF, V-Box 7 Positioner, Thomson Saginaw Actuator, Primestar fixed at AMC21, Channel Master CM-7000.
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Kiss My Assel bandido thanked for this post
-
07-08-2020,05:35 AM
Hello ,
This is a question about TNAP3.2.
On a USB key I have all the picks concerning the programs of the different satellites.
After a Blindscan there is no problem with OpenATV and TNAP 3.0 and Openvision the picons agree
with the different programs,
although the reference number is simplified on OATV and Openvision as on the picon itself and not simplified on TNAP3
On the other hand on TNAP3.2 the spikes are not matched for the programs.
Why this difference?
this problem does not occur on all satellites.
I cannot find a logic to this problem.Edision OS mio4K and Ustym 4K Pro with TNAP-5.1 ; Channel Master 1,80 ; TBS6983
LNB Ku Band . LNB KA Band 18200-19200 /21200-22200,LNB C band
-
Post Thanks / Like - 2 Thanks, 0 Likes, 0 Kiss My Assel bandido, ViP3R thanked for this post
-
07-09-2020,12:41 AM
Hello ,
No one has an explanation for these different behaviors?
Why TNAP3 has a problem with picons, and this only after the blindscan,
if with Dreamset help I load a list of frequencies and programs in the editor everything is fine,
after a blindscan it does not manage to match the picons and the programs ???Edision OS mio4K and Ustym 4K Pro with TNAP-5.1 ; Channel Master 1,80 ; TBS6983
LNB Ku Band . LNB KA Band 18200-19200 /21200-22200,LNB C band
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Kiss My AssMegatron817 thanked for this post
-
07-09-2020,05:30 AM
Only thing I can think of is a setting "ignore DVB-S namespace sub network". In the Customize menu on Tnap. See if they are set the same.
-
Post Thanks / Like - 2 Thanks, 0 Likes, 0 Kiss My Ass
-
07-09-2020,03:32 PM
What happens if you reboot the box after a blindscan?
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Kiss My AssViP3R thanked for this post
-
07-10-2020,01:08 AM
Hello El bandido,
Nothing is happening, no picon is displayed.
I really don't understand the problem.
Obviously on all images the OSD is set in the same way.
It is not dramatic, but it is incomprehensible and a little embarrassing.Edision OS mio4K and Ustym 4K Pro with TNAP-5.1 ; Channel Master 1,80 ; TBS6983
LNB Ku Band . LNB KA Band 18200-19200 /21200-22200,LNB C band
-
Post Thanks / Like - 3 Thanks, 0 Likes, 0 Kiss My Ass
-
07-11-2020,05:48 PM
Took a second look at your pictures. Why Tnap3 and 3.2 have the same service ref. and why tnap3 shows the picon is the mystery. Tnap3.2 seems be normal.
In the service ref. at the end is 1A4AFE9 the AFE9 would be the sub network so it appears Openatv and open vision is set to ignore DVB-S namespace sub network "Yes" because sub network is 0000 and both your Tnap image are set to ignore DVB-S namespace sub network "No".
-
Post Thanks / Like - 1 Thanks, 1 Likes, 0 Kiss My Assel bandido thanked for this postel bandido liked this post
-
07-12-2020,01:16 AM
Hello Megatron817
I noticed that the "service ref" is more complete on one and less on the other.
I cannot find in the menu or I can change that TNAP3.2 ignores DVB-S namespace sub network, like the other images.
If you could tell me where I can do it, it would be great
PS:
I finally found where I can change the menu.
it works perfectly after the change
Thank you very much for this help.
The problem is finally solved.Edision OS mio4K and Ustym 4K Pro with TNAP-5.1 ; Channel Master 1,80 ; TBS6983
LNB Ku Band . LNB KA Band 18200-19200 /21200-22200,LNB C band
-
Post Thanks / Like - 1 Thanks, 2 Likes, 0 Kiss My Assel bandido thanked for this postMegatron817, el bandido liked this post
-
-
Post Thanks / Like - 6 Thanks, 0 Likes, 0 Kiss My Ass
-
08-15-2020,04:25 AM
Hello,
Finally a little movement on the side of Edision.
Can't wait to see the new features (let's hope for progress) brought by this new kernel and DVB Driver.Edision OS mio4K and Ustym 4K Pro with TNAP-5.1 ; Channel Master 1,80 ; TBS6983
LNB Ku Band . LNB KA Band 18200-19200 /21200-22200,LNB C band
-
Post Thanks / Like - 2 Thanks, 0 Likes, 0 Kiss My AssViP3R, el bandido thanked for this post