Are there 5.1 versions for MOD and osmiomini 4k ?
Thread: TNAP-5.1 Image Discussion
Results 81 to 90 of 181
-
05-02-2024,09:10 PMNihil sine Deo !
-
05-02-2024,10:47 PM
5.1 version for MOD??? Sorry. I do not understand.
Edision os mio/mini 4k have the same updates you have. The same image on the feeds...etc. The Mini should load the 5.1 test image in Flash image first and then update it online.
Currently supporting in TNAP5.1:
Ustym4kPro
SF8008 & SF8008 Supreme
Edision 4K - MIO,MIO+, & Mini
(Some others are supported but not listed.)
-
Post Thanks / Like - 2 Thanks, 0 Likes, 0 Kiss My Ass
-
-
05-03-2024,04:54 AM
You have a choice of 4 drivers. Two of these drivers have been modded.
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Kiss My Asslme thanked for this post
-
05-03-2024,09:59 AM
Online Software update is available, dated 05-03-2024.This update is an extension of previous updates to the satfinder. Execute permissions for dvbreader.so have "supposedly" been removed to allow dvbreader.so execute privileges only when reading the stream. Previous satfinder versions had dvbreader with execute privileges at boot.
-
Post Thanks / Like - 4 Thanks, 0 Likes, 0 Kiss My Ass
-
-
Post Thanks / Like - 1 Thanks, 1 Likes, 0 Kiss My Assel bandido thanked for this postel bandido liked this post
-
05-03-2024,04:15 PM
Updated the Supreme to 05-03 and the sluggishness is gone. Blind scanned various and random ku sats without any problems.
-
Post Thanks / Like - 2 Thanks, 2 Likes, 0 Kiss My Assel bandido, stephan94 thanked for this postel bandido, Megatron817 liked this post
-
05-04-2024,08:33 AM
After the latest online updates, it seems to me my blind scans are faster. For example a blind scan of 99W Ku just now took 2:07. Very quick. Part of this may be related to installing a larger (4-foot) dish so the received signals are stronger and stand out from the noise. In the past, they had been getting very slow lasting over 5 or 6 minutes just to scan some Ku sat bands only. The software is stable for me.
Having said this, the Start Dish Motor feature seems not to be working now after these updates (or earlier updates?) though the feature worked previously. For 99W Ku, when I tried it this morning even with the dish manually peaked and receiving the first transponder of 11718 H 2390 Montana PBS at 9.3 dB, the reading shown by the Start Dish Motor feature is 2.08 dB. Similar happened on 103W Ku. I normally always manually peak the dish before blind scanning anyway so this feature doesn't matter to me.Edision OS Mio+ 4K UHD w/TNAP 5.1, GT Media V7S5X sharing 4-foot motorized Fortec offset (150W-82W), Invacom QPH-031 Ku linear/circular LNBF, Titanium C1PLL LNBF. 41-inch Star Choice w/circular LNB: 77W. Shaw 60e elliptical 103W/99W.
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Kiss My Assel bandido thanked for this post
-
05-04-2024,11:11 AM
The blindscan plugin starts the dish motor by tuning the first transponder for the satellite to be blindscanned in the satellites.xml list. Pretty much, this has to happen, else the satellite dish does not move. All we are doing is getting a signal reading from that first transponder in the satellites.xml and displaying it. So if the dish moves, or if the dish is commanded to move, then eventually, the signal displayed will come form the first transponder in satellites.xml.
Of course you know how to start the thing: Highlight Start Dish Motor, then use the left or right arrow keys to trigger the motor to move. Once you do that, the first transponder in the satellites.xml for the satellite to be scanned will eventually have its signal displayed. There's not much of a way around this.
Somethings to check are signal for the first transponder in signal finder, and if the dish actually did move. The dish will be commanded to move again when blindscan actually starts because the tuner is going to be commanded to tune again.
[Only registered and activated users can see links. ]
[Only registered and activated users can see links. ]
-
05-04-2024,12:49 PM
The way you describe is how it worked a short time ago. To simplify, I motored the dish to 129W Ku. There is only one active Ku transponder that scans in on this satellite: Reuters. I deleted other programmed tps from this satellite using TS-satellites Editor. So satellites.xml has only 1 tp listed. Signal Finder shows good SNR of 11.9 dB locked for Reuters. I use Start Dish Motor and it shows 2.64 dB. I do a blind scan and results show Reuters at good SNR locked. satellites.xml and blind scan results file attached. Everything is working except the dB reading showing when Start Dish Motor is activated is not correct. It seems a display issue not a function issue.
By the way, notice the Blindscan Frequency Range is not correct as printed in the Scan Results attached. On the Blind Scan screen display the range selected is correct as 11700 / 12900. This is probably not related; just a report printing issue.
[Only registered and activated users can see links. ]
[Only registered and activated users can see links. ]
[Only registered and activated users can see links. ]Last edited by cyberham; 05-04-2024 at 01:02 PM.
Edision OS Mio+ 4K UHD w/TNAP 5.1, GT Media V7S5X sharing 4-foot motorized Fortec offset (150W-82W), Invacom QPH-031 Ku linear/circular LNBF, Titanium C1PLL LNBF. 41-inch Star Choice w/circular LNB: 77W. Shaw 60e elliptical 103W/99W.
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Kiss My Assel bandido thanked for this post