I am running it set to Yes on the Nino Pro without any issues. Thanks for testing it though.
Results 11 to 20 of 62
-
11-17-2018,01:01 AM
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Kiss My AssMegatron817 thanked for this post
-
11-17-2018,06:39 AM
The duplicates didn't appear in the service scan from the blind scan. You find the duplicates in your Satellite services with the zero 4k. Set to yes would be alright if you are just setting up the receiver and didn't have any channels saved in satellite services with the default known transponder. Just don't make a new blind scan and use no with disable sync with known transponders or you could get duplicates in the satellite services. 97w ku is the satellite I found the duplicates. A wok around would be to update the satellite .xml with the found frequencies from using yes during the blind scan,
Last edited by Megatron817; 11-17-2018 at 06:55 AM.
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Kiss My AssViP3R thanked for this post
-
11-17-2018,08:31 AM
Tell you the truth circular lnb setting is working. I forgot to set user defined 10750. when I scroll over to user defined from circular it was set 9750lofl,10600lofh so it was definitely using the circular lnb setting. found the same amount of channels using both settings. But I will leave it set to user defined 10750.
Last edited by Megatron817; 11-17-2018 at 08:36 AM.
-
11-17-2018,09:13 AM
Are you clearing All Services before each blindscan?
-
11-17-2018,09:44 AM
No, not clearing. I am trying that now with (yes) desync known transponders. ok clearing messed up my favorites. Get a lot of <n/a> in my favorites list.
A rescan with clearing and NO fixed the favorites list.Last edited by Megatron817; 11-17-2018 at 09:51 AM.
-
11-17-2018,09:55 AM
That is because the transponders are being found on a slightly different frequency than the transponder that the favorites were made with.
.
.
.
Meine Dreambox One ist ein Stück Scheiße!.
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Kiss My AssMegatron817 thanked for this post
-
11-17-2018,10:05 AM
Yes that's the issue. I like the desync feature but I think the satellite .xml will need to reflect the same frequency as the bindscan finds. I know how to edit the Satellite .xml file to make it custom. Only thing everyone would have to use thier own custom .xml file if they don't want to have the issue of selecting yes desync known transponders.
-
11-17-2018,11:11 AM
EB, you know what the (Yes) disable sync feature will work fine for me on 91W and 105W. I just wont use it on 103w or 97w where most favorites are. Then I shouldn't have any issues.
-
11-17-2018,01:07 PM
Save your settings before you scan, then reload settings when finished. That takes 2-3 minutes to restore everything the way it was, and cleans up any messes that were made.
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Kiss My AssMegatron817 thanked for this post
-
11-17-2018,03:46 PM
I re done my fav's with the new frequencies and reflected them in my custom satellite .xml file so I should be good on 97w and 103w. Just can't use clear before scan on 103w because it will delete the Radio channels. Should not make much of a mess now.
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Kiss My Assel bandido liked this post