Hi i can install this image on my uclan twin 4k pro is clone of octagon i have muliboot already installed. Mlsat2
Thread: Tnap octagon sf8008
Results 1 to 10 of 14
-
Tnap octagon sf8008 – 09-03-2022,03:38 PM
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Kiss My Assel bandido thanked for this post
-
09-03-2022,03:52 PM
Welcome to Legit!
You can do that but the remote probably will not work. Where are you located?
-
09-03-2022,06:06 PM
to near montreal qc canada
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Kiss My Assel bandido thanked for this post
-
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Kiss My Assstephan94 thanked for this post
-
09-07-2022,08:28 PM
Thank you i will test it this weekend
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Kiss My Assel bandido thanked for this post
-
09-10-2022,06:26 PM
Have installed ..remote is ok..thank you i go to explore this.
-
Post Thanks / Like - 2 Thanks, 0 Likes, 0 Kiss My Assel bandido, stephan94 thanked for this post
-
Uclan Ustym 4K pro with TNAP 4.2 – 10-11-2022,04:05 AM
Hi el bandido
I also got a Uclan Ustym 4K pro
and I just loaded TNAP 4.2 on it.
To make it work (in the flash image menu) you have to remove "ofgwrite" in the ZIP name of the ZIP otherwise it doesn't work.
I am discovering this receiver.
Contrary to the Edision MIO4K it does not find MIS and T2MI alone
with the blindscan, they have to be in an xml to be able to read them.
On the other hand, it has a particularity
it can read frequencies with very small SR
here an amateur radio frequency on 26°East (with a special LNB that goes
below 10490.)
It also has a very good sensitivity with weak signals.Edision OS mio4K and Ustym 4K Pro with TNAP-5.1 ; Channel Master 1,80 ; TBS6983
LNB Ku Band . LNB KA Band 18200-19200 /21200-22200,LNB C band
-
Post Thanks / Like - 1 Thanks, 2 Likes, 0 Kiss My Assel bandido thanked for this postel bandido, MikeB liked this post
-
10-18-2022,07:52 AM
Hello ,
with the Uclan Ustym 4K pro can we use the "extra" plugins "T2MI" and "No-T2MI" ?
These plugins were developed for the MIO4K tuner.
the Uclan has another tuner, does it work ?
if we try, can it be a danger for the Uclan and its tuner ?Edision OS mio4K and Ustym 4K Pro with TNAP-5.1 ; Channel Master 1,80 ; TBS6983
LNB Ku Band . LNB KA Band 18200-19200 /21200-22200,LNB C band
-
10-18-2022,09:08 AM
Those plugins are only for the osmio receiver. They will not work in other models.Thanks.
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Kiss My Assstephan94 thanked for this post
-
02-05-2024,01:02 AM
Hello El Bandido
At the beginning of 2022 you wrote your TNAP 4.2 image, starting from SF 8008, for the Uclan Ustym 4K pro.
Is it possible that you could do the same thing with the TNAP 5 version with the addition of the Ocean04
modifications that you have just successfully achieved with the SF8008 (supreme)?
I know that the "SF8008" and the "SF8008 supreme" are a bit different, but is it possible, or is it hopeless?
thanks in advanceEdision OS mio4K and Ustym 4K Pro with TNAP-5.1 ; Channel Master 1,80 ; TBS6983
LNB Ku Band . LNB KA Band 18200-19200 /21200-22200,LNB C band